From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tom Date: Tue, 28 Apr 2009 10:40:31 -0500 Subject: [U-Boot] Zoom2 initial support rebased to arm/next Message-ID: <49F7236F.3010202@windriver.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Here is the changes to Zoom2 to rebase onto the arm/next branch Patch set to follow. Tom 1. omap gpio changed to apply Makefile change Whitespace in docs Jean-Christophe Zoom2 base 4/24 2. > > Divisor field is called PTV not PVT. > > > > This change is needed because of earlier OMAP commit > > 81472d893fa565c9d300928a40e504a689bde131 > > of the same name > > this change need to be done at the first patch otherwise will not be able to compile it or bisect it at all Tom: Rebased into 1 3. > --- a/include/configs/omap3_zoom2.h > > +++ b/include/configs/omap3_zoom2.h > > @@ -93,6 +93,22 @@ > > #define CONFIG_OMAP3_MMC 1 > > #define CONFIG_DOS_PARTITION 1 > > > > +/* Status LED */ > > +#define CONFIG_STATUS_LED 1 /* Status LED enabled */ ^^^^^^^^^^^^^^^ please use tab not space and so on Tom: Tabified all led #defines 4. >>> as said precedently .ARM.extab & .ARM.exidx is not needed please remove >> > > I've seen you fix it in the 10th patch > > > > So what does this mean now? Will this patch 01/10 be accepted? As ask on the [PATCH 05/10] ZOOM2: rename timer divisor this patch and the 5th need to be joined otherwise fine Tom: Rebased into 1 Testing Run tested on zoom2 and zoom1 Compile tested with MAKEALL arm