From mboxrd@z Thu Jan  1 00:00:00 1970
From: Dirk Behme <dirk.behme@googlemail.com>
Date: Thu, 30 Apr 2009 20:37:52 +0200
Subject: [U-Boot] OMAP3: Pending patches
In-Reply-To: <49F5C746.6040204@googlemail.com>
References: <49F221C1.8070503@googlemail.com> <49F5C746.6040204@googlemail.com>
Message-ID: <49F9F000.2060808@googlemail.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de


Short status update after recent ARM pull request

http://lists.denx.de/pipermail/u-boot/2009-April/051803.html

Dirk Behme wrote:
>> To avoid loosing the overview, here my list of pending OMAP3 patches 
>> ready to be applied. From my point of view there are no open comments 
>> on these which will prevent to apply them. But please correct if I 
>> overlooked anything or add what (patches? comments?) I missed.
>>
>> 1. OMAP3: Beagle: Set pinmux conditionally for Rev C boards
>> http://lists.denx.de/pipermail/u-boot/2009-April/051013.html
> 
> Mail
> 
> http://lists.denx.de/pipermail/u-boot/2009-April/051459.html
> 
> tells us that this should be applied to u-boot-arm next. But I can't 
> find it in gitweb
> 
> http://git.denx.de/?p=u-boot/u-boot-arm.git;a=shortlog;h=refs/heads/next
> 
> Did I miss something?
> 
> Btw.: As initial patch and first update was sent ~1 day after merge 
> window close (Apr 4?) I hoped to have a chance to still get it into 
> master ;(

Applied to u-boot-arm next.

>> 2. OMAP3: Remove legacy NAND defines
>> http://lists.denx.de/pipermail/u-boot/2009-April/050882.html
> 
> Applied to u-boot-arm next. Request to move to master by Wolfgang.

Copied to u-boot-arm master and part of above ARM pull request (still 
in u-boot-arm next, too?)

>> 3. OMAP3: Fix timer handling to 1ms and CONFIG_SYS_HZ to 1000
>> http://lists.denx.de/pipermail/u-boot/2009-April/051178.html

Pending

http://lists.denx.de/pipermail/u-boot/2009-April/051518.html

>> 4. OMAP3: Fix changed mmc init command
>> http://lists.denx.de/pipermail/u-boot/2009-April/051179.html
> 
> Applied to u-boot-arm master.

... and part of above ARM pull request.

>> 5. OMAP3: Remove unused board-types
>> http://lists.denx.de/pipermail/u-boot/2009-April/051338.html
>>
>> 6. OMAP3: Print correct silicon revision
>> http://lists.denx.de/pipermail/u-boot/2009-April/051339.html
> 
> Patches 5 & 6 replaced by update which includes switch to checkboard and 
> print_cpuinfo:
 >
> OMAP3: Board specific updates (3 patches)
> http://lists.denx.de/pipermail/u-boot/2009-April/051505.html
> http://lists.denx.de/pipermail/u-boot/2009-April/051506.html
> http://lists.denx.de/pipermail/u-boot/2009-April/051507.html

All three patches applied to u-boot-arm master and part of above pull 
request.

>> 7. Zoom2 respin II (10 patches)
...

Recent remaining 5 Zoom2 patches

http://lists.denx.de/pipermail/u-boot/2009-April/051651.html
http://lists.denx.de/pipermail/u-boot/2009-April/051652.html
http://lists.denx.de/pipermail/u-boot/2009-April/051653.html
http://lists.denx.de/pipermail/u-boot/2009-April/051654.html
http://lists.denx.de/pipermail/u-boot/2009-April/051655.html

pending/under discussion

http://lists.denx.de/pipermail/u-boot/2009-April/051792.html

Summary:

Besides the question if "Set pinmux conditionally for Rev C boards" 
should go from next to master, the 5 "Zoom2" and the "OMAP3: Fix timer 
handling to 1ms and CONFIG_SYS_HZ to 1000" are still open.

Best regards

Dirk