From mboxrd@z Thu Jan  1 00:00:00 1970
From: Derek Ou <derek@siconix.com>
Date: Thu, 30 Apr 2009 15:21:56 -0600
Subject: [U-Boot] Disable features
In-Reply-To: <20090430211504.A18F183420E8@gemini.denx.de>
References: <mailman.2079.1241006011.8190.u-boot@lists.denx.de>
	<49FA0922.2000107@siconix.com>
	<20090430205506.4B62F83420E8@gemini.denx.de>
	<49FA1279.5080406@siconix.com>
	<20090430211504.A18F183420E8@gemini.denx.de>
Message-ID: <49FA1674.9020109@siconix.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Wolfgang Denk wrote:
> Dear Derek Ou,
>
> In message <49FA1279.5080406@siconix.com> you wrote:
>   
>> When we have the Network support compiled, it takes a few second to do 
>> the auto-negotiation
>>     
> That should be part of the network init sequence, which should only be
> run when you run a network command.
>   
The board goes to auto-negotiation before boot delay count down.  So 
it's before I can run
any command.  I will look into the network init routine then.
>> even though MAC chip is not on board.  Then it fails out and goes to 
>> autoboot.  Is it a board specific problem or system problem?
>>     
> Board (or architecture) problem.
> Which board / architecture is this?
>   
It's an Atmel AT91SAM9263(ek) board.  ARM architecture.
> Best regards,
> Wolfgang Denk
>   
Derek