* [U-Boot] U-Boot on Xilinx Virtex platforms
@ 2009-05-06 8:33 Felix Radensky
2009-05-07 13:03 ` Grant Likely
0 siblings, 1 reply; 2+ messages in thread
From: Felix Radensky @ 2009-05-06 8:33 UTC (permalink / raw)
To: u-boot
Hi,
I'm new to Xilinx world, so please bare with my ignorance.
Looking at u-boot Xilinx files I see that u-boot does not perform
SDRAM initialization. SDRAM is apparently initialized by FPGA
code. Is that correct ?
Another question is whether u-boot on Virtex can start
executing from NOR flash or should be copied to SDRAM
by some first level bootloader ?
Thanks a lot.
Felix.
^ permalink raw reply [flat|nested] 2+ messages in thread
* [U-Boot] U-Boot on Xilinx Virtex platforms
2009-05-06 8:33 [U-Boot] U-Boot on Xilinx Virtex platforms Felix Radensky
@ 2009-05-07 13:03 ` Grant Likely
0 siblings, 0 replies; 2+ messages in thread
From: Grant Likely @ 2009-05-07 13:03 UTC (permalink / raw)
To: u-boot
On Wed, May 6, 2009 at 2:33 AM, Felix Radensky <felix@embedded-sol.com> wrote:
> Hi,
>
> I'm new to Xilinx world, so please bare with my ignorance.
>
> Looking at u-boot Xilinx files I see that u-boot does not perform
> SDRAM initialization. SDRAM is apparently initialized by FPGA
> code. Is that correct ?
Usually, yes.
> Another question is whether u-boot on Virtex can start
> executing from NOR flash or should be copied to SDRAM
> by some first level bootloader ?
Yes. Either method works.
g.
--
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2009-05-07 13:03 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-05-06 8:33 [U-Boot] U-Boot on Xilinx Virtex platforms Felix Radensky
2009-05-07 13:03 ` Grant Likely
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox