[U-Boot] Data transfer through Ethernet in u-boot.

[prathika <prathika@deeopl.com>]

Wolfgang Denk wrote:
> Dear prathika,
>
> please do not top post / full quote. Make sure to read and understand
> http://www.netmeister.org/news/learn2quote.html
>
>
> In message <4A08080E.6030605@deeopl.com> you wrote:
>   
>> You have mentioned to add the test code to the existing POST framework. In my hardware, I have CAN controller interfaced to SPI interface, SPI DACs, parallel ADCs, 1553B controller interfaced to EBC.
>> I have  a CPLD to generate chip selects to these ICs.
>> If this test code will be useful, please let me to know how to add it to the POST framework.
>>     
>
> Well, study the existing code and the documentation, than add your
> test code.
>
>   
>> I understood that "tftp" command in u-boot has been coded only for receiving data from the PC and not to transmit, to PC.If this is the case should i add the transmit code to the "tftp" command?
>>     
>
> Yes.
>   
>> Even if I use this command for data transfer, what are the requirements for the application in PC side?
>>     
>
> I don't understand this question? 
>   

        --Here, I will be connecting my board through a GUI to a Windows
        PC. I will interact using this GUI. Actually if I use "tftp"
        command for file transfer, do I need some tftp client or server
        running on my Windows PC?

Thanks & Regards,
Prathika R