* [U-Boot] Help with driver for a ethernet switch
@ 2009-05-12 19:51 Raphael Amorim
2009-05-12 20:07 ` Ben Warren
0 siblings, 1 reply; 2+ messages in thread
From: Raphael Amorim @ 2009-05-12 19:51 UTC (permalink / raw)
To: u-boot
Hello all,
Could anyone help me with this?
Which change should I do on
http://git.denx.de/u-boot/drivers/net/ks8695eth.c
to make it work with the ks8995m ? Have anyone done this before?
thanks,
Raphael
^ permalink raw reply [flat|nested] 2+ messages in thread
* [U-Boot] Help with driver for a ethernet switch
2009-05-12 19:51 [U-Boot] Help with driver for a ethernet switch Raphael Amorim
@ 2009-05-12 20:07 ` Ben Warren
0 siblings, 0 replies; 2+ messages in thread
From: Ben Warren @ 2009-05-12 20:07 UTC (permalink / raw)
To: u-boot
Hi Raphael,
Raphael Amorim wrote:
> Hello all,
>
> Could anyone help me with this?
> Which change should I do on
> http://git.denx.de/u-boot/drivers/net/ks8695eth.c
> to make it work with the ks8995m ? Have anyone done this before?
>
> thanks,
>
> Raphael
>
>
First, read the data sheets for both chips to find out how
similar/different they are. If similar, modify or copy the ks8695
driver. If they're significantly different, you might find a better
match for a template.
No matter what, you need to understand your hardware.
Please note that the KS8695 driver will be changing soon because the API
that it uses is deprecated. There are plenty of examples of drivers
that use the preferred methods.
regards,
Ben
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2009-05-12 20:07 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-05-12 19:51 [U-Boot] Help with driver for a ethernet switch Raphael Amorim
2009-05-12 20:07 ` Ben Warren
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox