[U-Boot] Ethernet not working on OMAP3 board with

Pillai, Manikandan
2009-05-28T09:43:59Z

> -----Original Message-----
> From: Pillai, Manikandan
> Sent: Wednesday, May 27, 2009 10:01 AM
> To: 'Josh Karabin'
> Cc: Dirk Behme; u-boot at lists.denx.de
> Subject: RE: [U-Boot] Ethernet not working on OMAP3 board with
>
>
> OK I will try with the same commit and send the results.
>
> > -----Original Message-----
> > From: Josh Karabin [mailto:gkarabin at vocollect.com]
> > Sent: Tuesday, May 26, 2009 8:26 PM
> > To: Pillai, Manikandan
> > Cc: Dirk Behme; u-boot at lists.denx.de
> > Subject: Re: [U-Boot] Ethernet not working on OMAP3 board with
> >
> >
> > Pillai, Manikandan wrote:
> > > Hi Dirk,
> > >
> > > I have already tried this patch it does not work on EVM.
> > > Was any other patch applied along with this ?
> >
> > That was the only one that I needed, on top of the arm/next branch from
> > last week. The last commit was 86d5c98d3d97d631b1d3a5f5e6a17e87c99b42cf
> > : "OMAP3: Fix CKE1 MUX setting to allow self-refresh".
> >
[Pillai, Manikandan] I tried with this commit and it works. If I use the v2009.06-rc1 tag with these changes it does not work.

smc911x: initializing
smc911x: detected LAN9115 controller
smc911x: phy initialized
Addrr = 0 1 2 2 4 4
smc911x: MAC 00:01:02:02:04:04
BOOTP broadcast 1
BOOTP broadcast 2
BOOTP broadcast 3
BOOTP broadcast 4

So guess there are some more changes that require to be done. Any ideas welcome.
> > - Josh