From mboxrd@z Thu Jan 1 00:00:00 1970 From: Dirk Behme Date: Wed, 20 May 2009 18:36:09 +0200 Subject: [U-Boot] Ethernet not working on OMAP3 board with In-Reply-To: <19F8576C6E063C45BE387C64729E73940432481452@dbde02.ent.ti.com> References: <19F8576C6E063C45BE387C64729E73940432480D02@dbde02.ent.ti.com> <4A12C4CC.7050200@googlemail.com> <19F8576C6E063C45BE387C64729E73940432481452@dbde02.ent.ti.com> Message-ID: <4A143179.7060902@googlemail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Pillai, Manikandan wrote: > Hi , > > Tried the hints but they don't work. I still don't have a fix. Still investigating. Just two infos, maybe they help somehow: - We recently cleaned up OMAP3's clock code. But this was to _improve_ network. If I remember correctly, Mani tested all clock changes and they were fine. See git history of cpu/arm_cortexa8/omap3/interrupts.c for details. - Steve has still no luck with lan9221 from SMSC on Overo (U-Boot's smc991x driver). See thread http://lists.denx.de/pipermail/u-boot/2009-April/051238.html http://lists.denx.de/pipermail/u-boot/2009-April/051247.html http://lists.denx.de/pipermail/u-boot/2009-April/051259.html I'm not sure which network chip is used on EVM, though. Best regards Dirk >> -----Original Message----- >> From: Dirk Behme [mailto:dirk.behme at googlemail.com] >> Sent: Tuesday, May 19, 2009 8:10 PM >> To: Pillai, Manikandan >> Cc: u-boot at lists.denx.de >> Subject: Re: Ethernet not working on OMAP3 board with >> >> Hi Mani, >> >> Pillai, Manikandan wrote: >>> Hi, >>> >>> I was testing the latest tip of u-boot and v2009.06-rc1, I find that the >> Ethernet is not working. >>> Is there some fix available for this issue ? The 2009.03 was working fine. >> Any news on this? Did the hints from ml help? Or do we have to >> investigate further? >> >> Best regards >> >> Dirk >> > >