[U-Boot] [PATCH 3/4] ZOOM2 Add power reset button

[Heiko Schocher <hs@denx.de>]

Hello Dirk,

Dirk Behme wrote:
> Menon, Nishanth wrote:
>>> -----Original Message-----
>>> From: Peter Tyser [mailto:ptyser at xes-inc.com]
>>> Sent: Wednesday, June 10, 2009 9:27 AM
>>>> diff --git a/drivers/i2c/twl4030_i2c.c b/drivers/i2c/twl4030_i2c.c
>>>> index 774f813..549f974 100644
>>>> --- a/drivers/i2c/twl4030_i2c.c
>>>> +++ b/drivers/i2c/twl4030_i2c.c
>>>> @@ -35,3 +35,25 @@ static inline int twl4030_i2c_read_u8(u8 chip_no, u8
>>> *val, u8 reg)
>>>>  	return i2c_read(chip_no, reg, 1, val, 1);
>>>>  }
>>>>
>>>> +/*
>>>> + * Power Reset
>>>> + */
>>>> +void twl4030_power_reset_init(void)
>>>> +{
>>>> +#ifdef CONFIG_OMAP3_ZOOM2
>>>> +	u8 val = 0;
>>>> +	if (twl4030_i2c_read_u8(TWL4030_CHIP_PM_MASTER, &val,
>>>> +				TWL4030_PM_MASTER_P1_SW_EVENTS)) {
>>>> +		printf("Error:TWL4030: failed to read the power register\n");
>>>> +		printf("Could not initialize hardware reset\n");
>>>> +	} else {
>>>> +		val |= TWL4030_PM_MASTER_SW_EVENTS_STOPON_PWRON;
>>>> +		if (twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, val,
>>>> +					 TWL4030_PM_MASTER_P1_SW_EVENTS)) {
>>>> +			printf("Error:TWL4030: failed to write the power
>>> register\n");
>>>> +			printf("Could not initialize hardware reset\n");
>>>> +		}
>>>> +	}
>>>> +#endif
>>>> +}
>>>> +
>>> All other drivers in drivers/i2c are host adapter drivers.  Ie they
>>> implement i2c_read(), i2c_write(), i2c_probe(), and i2c_init().  The
>>> twl4030_i2c.c driver doesn't seem to fit this mold.  Perhaps it would be
>>> better placed in drivers/misc or a new drivers/power directory similar
>>> to Linux?
>> This function probably belongs to board/omap3/common/power.c -> or even better to the board file itself?
> 
> I was about to mention the opposite ;)
> 
> Jean-Christophe asked to move the code from power.c to driver directory
> 
> http://lists.denx.de/pipermail/u-boot/2009-May/052400.html
> 
> If you follow above discussion, I was fine with power.c. If we get now 
> a twl4030_i2c.c, we should merge the code from power.c into it, too 
> (where ever it will be located and named, then).

Hmm.. why not in a "drivers/power" directory? This twl4030_i2c.c is no i2c
driver in my opinion. And I won;t to avoid creating subdirs in drivers/i2c.

I think an drivers/power directory would be a good solution.

bye
Heiko
-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany