From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ilya Yanok Date: Thu, 18 Jun 2009 02:19:40 +0400 Subject: [U-Boot] [PATCH 3/7] fec_imx27: driver for FEC ethernet controller on i.MX27 In-Reply-To: References: <1242777361-6717-1-git-send-email-yanok@emcraft.com> <1242777361-6717-4-git-send-email-yanok@emcraft.com> <4A36A820.3020509@lists.lammerts.org> Message-ID: <4A396BFC.90001@emcraft.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Johan, > Seems like that was the trick. After removing the breakout board it > works much better. > > I still got some problems which I don't know if its software related. > Sometimes when I power on the board the ethernet LEDs does not turn > green and the network does not work. If I power cycle the board a > number of times the LEDs turn green I can can use the network. Do you > know if that might be hw related or may it be something with the > initialization? > > I'll try to test U-boot v2 as you are using and see if it works better. > Our customer reported the same problem but we can't reproduce it on our hardware... Could you please tell me if U-Boot v2 works for you well? Regards, Ilya.