[U-Boot] [PATCH v2] Atmel LCD driver GUARDTIME fix

[U-Boot] [PATCH v2] Atmel LCD driver GUARDTIME fix

[Mark Jackson]

This patch allows the guard time parameter to be set in
the Atmel LCDC driver.

By default, the previous value of 1 is used, unless the
setting is defined elsewhere.

Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
---
 drivers/video/atmel_lcdfb.c |    7 +++++--
 1 files changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
index 3a51cc7..db86763 100644
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/atmel_lcdfb.c
@@ -42,6 +42,9 @@ short console_row;
 /* configurable parameters */
 #define ATMEL_LCDC_CVAL_DEFAULT		0xc8
 #define ATMEL_LCDC_DMA_BURST_LEN	8
+#ifndef ATMEL_LCDC_GUARD_TIME
+#define ATMEL_LCDC_GUARD_TIME		1
+#endif
 
 #if defined(CONFIG_AT91SAM9263) || defined(CONFIG_AT91CAP9)
 #define ATMEL_LCDC_FIFO_SIZE		2048
@@ -69,7 +72,7 @@ void lcd_ctrl_init(void *lcdbase)
 
 	/* Turn off the LCD controller and the DMA controller */
 	lcdc_writel(panel_info.mmio, ATMEL_LCDC_PWRCON,
-		    1 << ATMEL_LCDC_GUARDT_OFFSET);
+		    ATMEL_LCDC_GUARD_TIME << ATMEL_LCDC_GUARDT_OFFSET);
 
 	/* Wait for the LCDC core to become idle */
 	while (lcdc_readl(panel_info.mmio, ATMEL_LCDC_PWRCON) & ATMEL_LCDC_BUSY)
@@ -150,7 +153,7 @@ void lcd_ctrl_init(void *lcdbase)
 
 	lcdc_writel(panel_info.mmio, ATMEL_LCDC_DMACON, ATMEL_LCDC_DMAEN);
 	lcdc_writel(panel_info.mmio, ATMEL_LCDC_PWRCON,
-		    (1 << ATMEL_LCDC_GUARDT_OFFSET) | ATMEL_LCDC_PWR);
+		    (ATMEL_LCDC_GUARD_TIME << ATMEL_LCDC_GUARDT_OFFSET) | ATMEL_LCDC_PWR);
 }
 
 ulong calc_fbsize(void)

[U-Boot] [PATCH v2] Atmel LCD driver GUARDTIME fix

[Jean-Christophe PLAGNIOL-VILLARD]

On 15:59 Mon 29 Jun     , Mark Jackson wrote:
> This patch allows the guard time parameter to be set in
> the Atmel LCDC driver.
> 
> By default, the previous value of 1 is used, unless the
> setting is defined elsewhere.
> 
> Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
> ---
fine for me

Best Regards,
J.

[U-Boot] [PATCH v2] Atmel LCD driver GUARDTIME fix

[Anatolij Gustschin]

Mark Jackson wrote:
> This patch allows the guard time parameter to be set in
> the Atmel LCDC driver.
> 
> By default, the previous value of 1 is used, unless the
> setting is defined elsewhere.
> 
> Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
> ---
>  drivers/video/atmel_lcdfb.c |    7 +++++--
>  1 files changed, 5 insertions(+), 2 deletions(-)

Applied to u-boot-video. Thanks!

Best regards,
Anatolij