[U-Boot] [PATCH 0/6] Poseidon Board Support (Vivek)

[U-Boot] [PATCH 0/6] Poseidon Board Support (Vivek)

[Tom]

Do you have a link to the announcement of the board ?
Is it publically available ?
Tom

VIVEK DALAL wrote:
> Hi Tom 
>
> On  Jul 02, 2009 00:18 (GMT+09:00) Tom.Rix at windriver.com wrote :
>
>   
>> A large part of your changes are reorganizing omap24xx support.
>> Have you looked at how it is already done in omapzoom ?
>> git://git.omapzoom.org/repo/uboot.git
>> I believe omapzoom does it better.
>>     
>
> --- Thats one way you can do it. Other way is what I did. Rather then adding seperate files(in include/asm-arm/arch-omap24xx/ folder) for omap2430, what have been done in omapzoom/repo/uboot.git i.e omap2420., omap2430.h, clock.h, clock242x.h, clock243x.h etc.  Its better to use #define and put the processor specific code in those macros and make the file names generic. Imagine the scenerio, if there would be 5 processors based on arm1136.
>
>   
>> These changes are likely going to conflict with my recent i2c patch
>> http://lists.denx.de/pipermail/u-boot/2009-June/055071.html
>>     
>   
> ---I think you are only modifying i2c.h file in include/asm-arm/arch-omap24xx/ folder. So thats the only conflicting file between your patch and my patch.  In that file I have changed only two lines i.e 
>  -#define I2C_BASE                0x48070000
> -#define I2C_BASE2               0x48072000 /* nothing hooked up on h4 */
> +/* I2C base */
> +#define I2C_BASE                (OMAP24XX_L4_IO_BASE + 0x70000)
> +#define I2C_BASE2               (OMAP24XX_L4_IO_BASE + 0x72000)
> This minimal change will not be heavy when re-basing.
>  
> Regards
> Vivek Dalal
>  
>  
>  
>  
>  
>
>  

[U-Boot] [PATCH 0/6] Poseidon Board Support (Vivek)

[Tom]

Is there a link to a product description for the poseidon board ?
Are they available to the public ?

A large part of your changes are reorganizing omap24xx support.
Have you looked at how it is already done in omapzoom ?
git://git.omapzoom.org/repo/uboot.git
I believe omapzoom does it better.

These changes are likely going to conflict with my recent i2c patch
http://lists.denx.de/pipermail/u-boot/2009-June/055071.html

Tom