[U-Boot] [PATCH 1/2] ARM Cortex8 Rename and move v7_flush_dcache_all to flush_dcache

[Tom <Tom.Rix@windriver.com>]

Woodruff, Richard wrote:
>> From: u-boot-bounces at lists.denx.de [mailto:u-boot-bounces at lists.denx.de] On
>> Behalf Of Tom Rix
>> Sent: Monday, July 06, 2009 11:48 AM
>>     
>
>   
>> Since there is only one version of flushing the dcache for
>> arm_cortex8, rename v7_flush_dcache_all to the the generic
>> name flush_dcache.  Because the function is intended for
>> only omap3 boards, move the function to the new file
>> cache_flush.S.
>>     
>
> Minor point is file name or function name might change to be more reflective of what it does (cache_ops.S, and invalidate_dcache()).  As there is not really any 'flush' (cleaning out dirty entries to main memory).
>
>   
I will change the name to cache_ops.S
flush_dcache was chosen to match other boards/cpu's and one of the main 
reasons for this change.  If Jean is ok changing flush_dcache to 
invalidate_dcache,  I will make that change too.
Tom
 
> Today the dcache is not even enabled in ARM ports.  To do so requires MMU to be enabled to properly map IO regions as non-cached.
>
> As such all we ever need to do is possibly invalidate icache at run time (say you use Kermit to download something and try to execute it).
>
> The dcache invalidate today is only there to setup cache in clean state before calling the kernel.
>
> Later on a dcache-flush/icache-invalidate might need to be added if Dcache is actually enabled.
>
> Regards,
> Richard W.
>
>