[U-Boot] U-Boot doesn't compile for M54455EVB_intel_config

[Matthew Lear <matt@bubblegen.co.uk>]

Hi TsiChung / Wolfgang,

I just pulled u-boot.git to re-sync and tried to configure and build it
for M54455EVB_intel_config but the compilation failed. I tried a fresh
clone just to be sure and it was the same.

[snip]

m68k-linux-gnu-gcc  -g  -Os   -ffixed-d7 -msep-data -D__KERNEL__
-DTEXT_BASE=0x00000000 -I/home/matt/nht/git-uboot-master/u-boot/include
-fno-builtin -ffreestanding -nostdinc -isystem
/opt/freescale/usr/local/gcc-4.2.35-eglibc-2.5.35/m68k-linux/lib/gcc/m68k-linux-gnu/4.2.0/include
-pipe  -DCONFIG_M68K -D__M68K__ -mcpu=54455 -fPIC -DTEXT_BASE=0x00000000
-Wall -Wstrict-prototypes -fno-stack-protector   -o cmd_ide.o cmd_ide.c -c
cmd_ide.c: In function '__ide_outb':
cmd_ide.c:529: error: '_IO_BASE' undeclared (first use in this function)
cmd_ide.c:529: error: (Each undeclared identifier is reported only once
cmd_ide.c:529: error: for each function it appears in.)
cmd_ide.c: In function '__ide_inb':
cmd_ide.c:538: error: '_IO_BASE' undeclared (first use in this function)
cmd_ide.c: In function 'output_data':
cmd_ide.c:942: error: '_IO_BASE' undeclared (first use in this function)
cmd_ide.c: In function 'input_data':
cmd_ide.c:1000: error: '_IO_BASE' undeclared (first use in this function)
cmd_ide.c: In function 'output_data_shorts':
cmd_ide.c:1705: error: '_IO_BASE' undeclared (first use in this function)
cmd_ide.c: In function 'input_data_shorts':
cmd_ide.c:1711: error: '_IO_BASE' undeclared (first use in this function)
make[1]: *** [cmd_ide.o] Error 1
make[1]: Leaving directory `/home/matt/nht/git-uboot-master/u-boot/common'
make: *** [common/libcommon.a] Error 2


Is this expected at the current time?

Rgds,
--  Matt