[U-Boot] arm, i2c: added support for the TWSI I2C Interface

[Heiko Schocher <hs@denx.de>]

Hello Prafulla,

Prafulla Wadaskar wrote:
>> -----Original Message-----
>> From: Heiko Schocher [mailto:hs at denx.de] 
>> Sent: Thursday, July 16, 2009 3:34 PM
>> To: Prafulla Wadaskar
>> Cc: Jean-Christophe PLAGNIOL-VILLARD; U-Boot user list
>> Subject: Re: arm, i2c: added support for the TWSI I2C Interface
>>
>> Hello Prafulla,
>>
>> Prafulla Wadaskar wrote:
>>>> -----Original Message-----
>>>> From: Heiko Schocher [mailto:hs at denx.de] 
>>>> Sent: Thursday, July 16, 2009 1:31 PM
>>>> To: Jean-Christophe PLAGNIOL-VILLARD; Prafulla Wadaskar
>>>> Cc: U-Boot user list
>>>> Subject: arm, i2c: added support for the TWSI I2C Interface
>>>>
>>>> added support for the Hardware I2C TWSI Interface on
>>>> kirkwood SOCs, based on the Linux driver, without IRQ
>>>> support.
>>>>
>>>> Tested on a ARM926EJS (CPU Core Version FEROCEON_88FR131
>>>> SOC Family: KIRKWOOD, KW88F6281) based suen3 board
>>>>
>>>> Signed-off-by: Heiko Schocher <hs@denx.de>
>>>> ---
>>>>  drivers/i2c/Makefile      |    1 +
>>>>  drivers/i2c/mv64xxx-i2c.c |  452 
>>> Can you rename this? 
>> Of course, what name do you prefer?
> I will prefer a name kirkwood_i2c.c

Hmm.. I thought twsi_i2c.c ...

>>>> +++++++++++++++++++++++++++++++++++++++++++++
>>>>  2 files changed, 453 insertions(+), 0 deletions(-)
>>>>  create mode 100644 drivers/i2c/mv64xxx-i2c.c
>>>>
>>>> diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
>>>> index ef32f13..ce30111 100644
>>>> --- a/drivers/i2c/Makefile
>>>> +++ b/drivers/i2c/Makefile
>>>> @@ -33,6 +33,7 @@ COBJS-$(CONFIG_DRIVER_OMAP1510_I2C) += 
>>>> omap1510_i2c.o
>>>>  COBJS-$(CONFIG_DRIVER_OMAP24XX_I2C) += omap24xx_i2c.o
>>>>  COBJS-$(CONFIG_DRIVER_OMAP34XX_I2C) += omap24xx_i2c.o
>>>>  COBJS-$(CONFIG_DRIVER_S3C24X0_I2C) += s3c24x0_i2c.o
>>>> +COBJS-$(CONFIG_I2C_MV64xxx) += mv64xxx-i2c.o
>>> Put this in order
>> What do you mean?
> Arrange them in alphabetical order, insert this line between "l" "m"

I think the "alphabetical order" is for the CONFIG_ defines ...
so I used the right place for it ... but, if I rename this define
in CONFIG_DRIVER_I2C_TWSI, it gets another place (between
 COBJS-$(CONFIG_I2C_MXC) += mxc_i2c.o
+COBJS-$(CONFIG_DRIVER_I2C_TWSI) += twsi_i2c.o
 COBJS-$(CONFIG_DRIVER_OMAP1510_I2C) += omap1510_i2c.o)

bye
Heiko
-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany