From mboxrd@z Thu Jan  1 00:00:00 1970
From: Ilya Yanok <yanok@emcraft.com>
Date: Thu, 23 Jul 2009 02:17:23 +0400
Subject: [U-Boot] [PATCH] imx27lite: add support for imx27lite board
	from LogicPD
In-Reply-To: <20090722213713.GG5890@game.jcrosoft.org>
References: <20090621112124.GH22845@game.jcrosoft.org>
	<1247828401-9515-1-git-send-email-yanok@emcraft.com>
	<20090722213713.GG5890@game.jcrosoft.org>
Message-ID: <4A678FF3.9050703@emcraft.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi Jean-Christophe,

Jean-Christophe PLAGNIOL-VILLARD wrote:
>> +static int imx27lite_devices_init(void)
>> +{
>> +	struct gpio_regs *regs = (struct gpio_regs *)IMX_GPIO_BASE;
>> +	int i;
>> +	unsigned int mode[] = {
>> +		PD0_AIN_FEC_TXD0,
>> +		PD1_AIN_FEC_TXD1,
>> +		PD2_AIN_FEC_TXD2,
>> +		PD3_AIN_FEC_TXD3,
>> +		PD4_AOUT_FEC_RX_ER,
>> +		PD5_AOUT_FEC_RXD1,
>> +		PD6_AOUT_FEC_RXD2,
>> +		PD7_AOUT_FEC_RXD3,
>> +		PD8_AF_FEC_MDIO,
>> +		PD9_AIN_FEC_MDC | GPIO_PUEN,
>> +		PD10_AOUT_FEC_CRS,
>> +		PD11_AOUT_FEC_TX_CLK,
>> +		PD12_AOUT_FEC_RXD0,
>> +		PD13_AOUT_FEC_RX_DV,
>> +		PD14_AOUT_FEC_CLR,
>> +		PD15_AOUT_FEC_COL,
>> +		PD16_AIN_FEC_TX_ER,
>> +		PF23_AIN_FEC_TX_EN,
>> +		PE12_PF_UART1_TXD,
>> +		PE13_PF_UART1_RXD,
>> +		PB4_PF_SD2_D0,
>> +		PB5_PF_SD2_D1,
>> +		PB6_PF_SD2_D2,
>> +		PB7_PF_SD2_D3,
>> +		PB8_PF_SD2_CMD,
>> +		PB9_PF_SD2_CLK,
>> +		(GPIO_PORTC | GPIO_OUT | GPIO_PUEN | GPIO_GPIO | 31),
>> +	};
>> +
>> +	for (i = 0; i < ARRAY_SIZE(mode); i++)
>> +		imx_gpio_mode(mode[i]);
>>     
> you do not answer about my api comment?
>   

Sorry, I forgot to write a separate mail to ask you.

> do you plan to create one for device init?
>   

What kind of API you expect me to create here? It's just IO pins
initialization...

Regards, Ilya.