From mboxrd@z Thu Jan  1 00:00:00 1970
From: Heiko Schocher <hs@denx.de>
Date: Tue, 28 Jul 2009 12:26:26 +0200
Subject: [U-Boot] [PATCH v2 2/2] arm nomadik: add i2c
In-Reply-To: <20090728094104.GI5259@game.jcrosoft.org>
References: <0e975ff141a9923b58859fad00cf3df664f2fe04.1248427487.git.rubini@unipv.it>
	<0b10781c46b757737db8ff5e49c2b8b745c9f269.1248427487.git.rubini@unipv.it>
	<20090727200408.GC5259@game.jcrosoft.org> <4A6EADE6.4040903@denx.de>
	<20090728094104.GI5259@game.jcrosoft.org>
Message-ID: <4A6ED252.40702@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hello Jean-Christophe,

Jean-Christophe PLAGNIOL-VILLARD wrote:
>>> it will better to define a couple of generic function where we implement it
>>> as this
>>> i2c_sda()
>>> i2c_scl()
>>> i2c_read()
>>> i2c_activate()
>>> i2c_tristate()
>>> i2c_delay()
>>> i2c_get_bus_num()
>>> i2c_set_bus_num()
>>> i2c_get_bus_speed()
>>> i2c_set_bus_speed()
>>> i2c_init()
>> I posted such a suggestion in this thread, see:
>> http://lists.denx.de/pipermail/u-boot/2009-July/056934.html
> I've forget to mention it but we offcource can do it in 2 step
> 
> so you have my ack to applied it with the gpio patch
> as IMHO it more i2c than ARM

OK, so I pick up this two patches with your Acked-by.

bye
Heiko
-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany