From mboxrd@z Thu Jan  1 00:00:00 1970
From: Heiko Schocher <hs@denx.de>
Date: Thu, 30 Jul 2009 09:31:06 +0200
Subject: [U-Boot] U-boot hangs in mtest in MPC8280 Board
In-Reply-To: <20090730064302.17558.qmail@f4mail-235-139.rediffmail.com>
References: <20090730064302.17558.qmail@f4mail-235-139.rediffmail.com>
Message-ID: <4A714C3A.1000401@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hello GurumurthyGowdar,

GurumurthyGowdar wrote:
> i am using MPC8280 in our board which has 512MB of SDRAM i.e. from micron.

Is this board in mainline, so I can look in the Source Code?
Which u-boot version?
Which SDRAMs?

> when i give command mtest  only for 1MB to check memory test from U-boot, machine check and program exception is coming after 40 - 60mins later it hangs giving program check exception

Hmm... maybe problems with your SDRAMs?
Is this error shown always after 40-60 mins, not sometimes also earlier?
Can you boot a Linux Kernel for example?

> i have checked the SDRAM configuration settings everything is fine as per the device datasheet.
> 
> please i want to know where is the problem, what is the cause for this exception. why memory test fails after 40-60mins.
> 
> error output is as attached:-
> 
> MPC8260 Reset Status: Check Stop, External Soft, External Hard
> 
> MPC8260 Clock Configuration
>  - Bus-to-Core Mult 5x, VCO Div 2, 60x Bus Freq  20-60 , Core Freq 100-300
>  - dfbrg 1, corecnf 0x1b, busdf 7, cpmdf 1, plldf 0, pllmf 7, pcidf 3
>  - vco_out  528000000, scc_clk  132000000, brg_clk   33000000
>  - cpu_clk  330000000, cpm_clk  264000000, bus_clk   66000000
> 
> CPU:   MPC8260 (HiP7 Rev 14, Mask 1.0 1K49M) at 330 MHz
> Board: MPC8280 Based Remote IO CARD.SLN Technologies Pvt Ltd.
> I2C:   ready
> DRAM:  512 MB
> FLASH: 256.5 MB
> *** Warning - bad CRC, using default environment
> 
> NIP: 1FFE8A30 XER: 00000000 LR: 1FFE899CC REGS: 1ffa1df0 TRAP: 0700 DAR: 00000000
> MSR: 00083002 EE: 0 PR: 0 FP: 1 ME: 1 IR/DR: 00
> 
> GPR00: 446BA781 1FFA1EE0 EFFFFFFF 3A858DD6 1FFA9F3C 000080C4 1FFA201D 3D313135 
> GPR08: 1FFF0314 NIP: 1FFE9648 XER: 20000000 LR: 1FFE93DC REGS: 1ffa1a68 TRAP: 0700 DAR: 00000000
> MSR: 00083002 EE: 0 PR: 0 FP: 1 ME: 1 IR/DR: 00
> 
> GPR00: 00000030 1FFA1B58 EFFFFFFF 1FFA1C1C 00000000 00000010 FFFFFFFF 00000030 
> GPR08: 00000041 00000000 00000000 00000002 1FFA1B60 FFF7FEFF 1FFFE000 DFFD2000 
> GPR16: 1FFF1240 1FFF1214 1FFF127C 1FFA1EA0 00003002 1FFA1DE0 1FFF47F8 1FFA1BD0 
> GPR24: 1FFA1C14 00000041 1FFF094C 00000000 1FFF47A8 1FFA1F6C 1FFF$EBBC FFFFFFFF 
> Call backtraace: 
> Program Check Exception

I cannot see here in this log, where you typed mtest ...

> 
> 
> i am stuck here, dont know where to check if it hangs after 40-60mins.

Maybe a temperature problem?

> do help me out in this regard,

If I can ... share more informations, and maybe I can.

bye
Heiko
-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany