[U-Boot] Weird issues with u-boot on Microblaze

From: Dana Goyette <dgoyette@calpoly.edu>
To: u-boot@lists.denx.de
Subject: [U-Boot] Weird issues with u-boot on Microblaze
Date: Thu, 20 Aug 2009 10:22:01 -0700	[thread overview]
Message-ID: <4A8D8639.3030504@calpoly.edu> (raw)
In-Reply-To: <4A8D0635.6000608@monstr.eu>

Michal Simek wrote:
> Hi,
> 
> 
> 
> FIT support is not in mainline u-boot. Only in my testing repository.
> 
>> If I fix that and try to load a FIT image with a kernel and device-tree,
>> the bootm command completely ignores the device tree; unfortunately,
> 
> Yes the same thing as with FIT. Not in mainline yet. Simple no time. But
> I have patches in my tree and I want to send them to next merge open window.
> 
> 
> 
>> I
>> don't have a log of this on hand, because now even image loading has
>> broken somehow.  For example, fatls ace 0 gives "   131074   \x02.\x02 ", and
>> attempting DHCP boot results in a spew of "ARP Retry count exceeded;
>> starting again" -- retry count exceeded, despite it never having tried
>> even once?
> 
> I'll test it.
> 
> 
>> I've attached a log of the console output under both conditions, as well
>> as the config.mk and xparameters.h under microblaze_generic; for some
>> reason, the given U-Boot BSP assumes 100MHz, despite the board using
>> 125MHz.  Does anyone have advice for getting u-boot to work on this board?
>>
> 
> I have fix for u-boot bsp which fix it. The same issue is for uart16550.
> 
> I am going to update my git repo at http://git.monstr.eu/git/gitweb.cgi
> There will be updated u-boot bsp too.
> 
> Thanks,
> Michal
> 
> 
>> Thanks in advance for any help.
>>
>>
>> ------------------------------------------------------------------------
>>
>> _______________________________________________
>> U-Boot mailing list
>> U-Boot at lists.denx.de
>> http://lists.denx.de/mailman/listinfo/u-boot
> 
> 

Thanks for the help!  I cloned your u-boot-microblaze repository, and 
the same fit_hdr_t issues applied; now I'm also working out other 
various issues.  If it would help, I can attach (or send) my project 
file or files, and even an image of the CompactFlash card I am using -- 
it's a 1GB card, with a 100MB fat16 and the rest in ext2.  Oddly enough, 
ext2ls just plain returns silently.

u-boot-microblaze/drivers/mtd/cfi_flash.c:2088: undefined reference to 
`monitor_flash_len'

I've also noticed that the "top" BSP looks in the Xilinx install path 
and the project path, but not the EDK user repository.

Thanks again for the help.