From mboxrd@z Thu Jan 1 00:00:00 1970 From: Dana Goyette Date: Thu, 20 Aug 2009 10:22:01 -0700 Subject: [U-Boot] Weird issues with u-boot on Microblaze In-Reply-To: <4A8D0635.6000608@monstr.eu> References: <4A8D0635.6000608@monstr.eu> Message-ID: <4A8D8639.3030504@calpoly.edu> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Michal Simek wrote: > Hi, > > > > FIT support is not in mainline u-boot. Only in my testing repository. > >> If I fix that and try to load a FIT image with a kernel and device-tree, >> the bootm command completely ignores the device tree; unfortunately, > > Yes the same thing as with FIT. Not in mainline yet. Simple no time. But > I have patches in my tree and I want to send them to next merge open window. > > > >> I >> don't have a log of this on hand, because now even image loading has >> broken somehow. For example, fatls ace 0 gives " 131074 . ", and >> attempting DHCP boot results in a spew of "ARP Retry count exceeded; >> starting again" -- retry count exceeded, despite it never having tried >> even once? > > I'll test it. > > >> I've attached a log of the console output under both conditions, as well >> as the config.mk and xparameters.h under microblaze_generic; for some >> reason, the given U-Boot BSP assumes 100MHz, despite the board using >> 125MHz. Does anyone have advice for getting u-boot to work on this board? >> > > I have fix for u-boot bsp which fix it. The same issue is for uart16550. > > I am going to update my git repo at http://git.monstr.eu/git/gitweb.cgi > There will be updated u-boot bsp too. > > Thanks, > Michal > > >> Thanks in advance for any help. >> >> >> ------------------------------------------------------------------------ >> >> _______________________________________________ >> U-Boot mailing list >> U-Boot at lists.denx.de >> http://lists.denx.de/mailman/listinfo/u-boot > > Thanks for the help! I cloned your u-boot-microblaze repository, and the same fit_hdr_t issues applied; now I'm also working out other various issues. If it would help, I can attach (or send) my project file or files, and even an image of the CompactFlash card I am using -- it's a 1GB card, with a 100MB fat16 and the rest in ext2. Oddly enough, ext2ls just plain returns silently. u-boot-microblaze/drivers/mtd/cfi_flash.c:2088: undefined reference to `monitor_flash_len' I've also noticed that the "top" BSP looks in the Xilinx install path and the project path, but not the EDK user repository. Thanks again for the help.