From mboxrd@z Thu Jan 1 00:00:00 1970 From: Michal Simek Date: Wed, 02 Sep 2009 09:54:20 +0200 Subject: [U-Boot] Xilinx LL temac update In-Reply-To: <4A94E930.4060209@monstr.eu> References: <1250851322-27896-1-git-send-email-monstr@monstr.eu> <4A945D7B.3000205@gmail.com> <4A94E930.4060209@monstr.eu> Message-ID: <4A9E24AC.9050204@monstr.eu> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de ping Michal Simek wrote: > Hi Ben, > Ben Warren wrote: >> Hi Michal, >> >> monstr at monstr.eu wrote: >>> Hi Ben, >>> >>> I updated LL-temac driver - all fixes are there. >>> Ad to your point Microblaze uses only one ethernet core. It is possible >>> to use a lot of IPs but I don't have board like this to test it that's >>> why I don't want change it. >>> >> If it's possible, somebody will do it. You don't need to have a board >> with more than one to test that it works, just create the data >> structures to encapsulate data that's specific to each instance, such as >> base address etc. Look at the new CS8900 driver or SMC911X for examples >> of how to do this > > If someone do it, then have to change that driver. I understand your opinion > but I don't need it now and it is paid IP core. It need more changes. > There is necessary change FIFO mode and phy handling + more changes in BSP > which generate parameters from HW design. It is necessary to do more complex changes. > I'll do that changes when phy lib is ready. > > If you can, please add it to your net tree. > > Thanks, > Michal > > > > >>> If you find any other problem please let me know. If is OK - I'll create >>> net branch with these changes (LL_TEMAC/Emaclite + removing old Emac >>> driver) >>> >>> >> You won't need to do that. I'll put it in the main net tree. >>> Thanks, >>> Michal >>> >>> >>> >> regards, >> Ben > > -- Michal Simek, Ing. (M.Eng) w: www.monstr.eu p: +42-0-721842854 Maintainer of Linux kernel 2.6 Microblaze Linux - http://www.monstr.eu/fdt/ Microblaze U-BOOT custodian