From mboxrd@z Thu Jan  1 00:00:00 1970
From: kevin.morfitt at fearnside-systems.co.uk <kevin.morfitt@fearnside-systems.co.uk>
Date: Fri, 04 Sep 2009 11:54:35 +0100
Subject: [U-Boot] boot linux data aboot for S3C2440A
In-Reply-To: <4AA0CAE0.5080804@walsimou.com>
References: <200909041501390422143@163.com> <4AA0CAE0.5080804@walsimou.com>
Message-ID: <4AA0F1EB.3050702@fearnside-systems.co.uk>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi fluke56512

I was the last one to work on an s3c2440 port - I ran out of time but I hope to submit my changes for the next release. In the meantime, you can use my patches as a starting point (see the series of patches in ref 1) or if you contact me directly I can send you a single patch for the u-boot-2009.08 release that works but isn't suitable for submission to this mailing list yet.

Regards
Kevin

abdoulaye Walsimou Gaye wrote:
> fluke56512 a ?crit :
>> what is wrong with me.
>>
>> [u-boot at S3C2440A]# nand read 0x30008000 0x00040000 0x00200000
>> NAND read: device 0 offset 0x40000, size 0x200000
>>  2097152 bytes read: OK
>>   
> 
> Hello fluke56512,
> IIRC board with S3C2440A does not exist in the official versions of u-boot.
> Few attempts have been made[1], but without going futher. Or may be you 
> are working on it? I planed to work on it
> with the cheap mini2440 board, but I am too busy for now.
> 
> cheers,
> 
> [1] http://lists.denx.de/pipermail/u-boot/2009-June/054887.html
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>