From: Tom <Tom.Rix@windriver.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] USB device support for OMAP3
Date: Fri, 04 Sep 2009 15:21:40 -0500 [thread overview]
Message-ID: <4AA176D4.6060801@windriver.com> (raw)
The recently posted patches enable usb device support for omap3
They are against the repository http://git.denx.de/u-boot-arm.git,
branch 'next'
You can also view them in my development tree
http://dev.omapzoom.org/?p=trix/u-boot.git;a=shortlog;h=refs/heads/arm-next-development
starting at commit 50031bc80615f4fcafcdc613020b87a326aaed92
The device support was usbtty.
This was run tested on beagle, zoom1 and zoom2.
The maintainer of the beagle and zoom1 boards should decide if they want
a usb device
starting for their board.
For zoom2, the usbtty is the console when the debug board is not present.
There were some small changes to the musb common code.
The devinci maintainer should check that their host support is ok.
There is a large change to usb structures that should be also tested out.
I ran this through MAKEALL arm, mips and ppc but I do not have a board
that uses
usb in host mode.
After this I plan on submitting a new usb device called 'fastboot'
It provides a limited set of basic commands to help develop over just usb.
Here is a link.
https://gforge.ti.com/gf/project/omapzoom/wiki/?pagename=FAQ-8%3A+Zoom-II+Android%C2%A0fastboot
Tom
next reply other threads:[~2009-09-04 20:21 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-09-04 20:21 Tom [this message]
2009-09-04 20:28 ` [U-Boot] USB device support for OMAP3 Pandita, Vikram
2009-09-05 5:46 ` Dirk Behme
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4AA176D4.6060801@windriver.com \
--to=tom.rix@windriver.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox