[U-Boot] [PATCH-ARM] CONFIG_SYS_HZ fix for ARM902T S3C24X0 Boards

[kevin.morfitt at fearnside-systems.co.uk <kevin.morfitt@fearnside-systems.co.uk>]

On 07/09/2009 22:47, Wolfgang Denk wrote:
> Dear "kevin.morfitt at fearnside-systems.co.uk",
> 
> In message <4AA284B9.8030009@fearnside-systems.co.uk> you wrote:
>> This sets CONFIG_SYS_HZ to 1000 for all boards that use the s3c2400 and
>> s3c2410 cpu's which fixes various problems such as the timeouts in tftp being
>> too short.
> 
> I still wonder if this is really an issue. Some s3c2400 based boards
> have been in production use for several years, with volumes of many
> thousands of devices per year. Yet no TFTP timeout issues have been
> reported ever.
> 
>> This affects the sbc2410, smdk2400, smdk2410 and trab boards. I've copied it
>> directly to the maintainers of all except the sbc2410 which doesn't have an
>> entry in MAINTAINERS.
> 
> I tested it on trab, and I don't see any changes - both U-Boot and
> Linux still work as they always used to work.
> 
> Tested-by: Wolfgang Denk <wd2denx.de>
> 
> Best regards,
> 
> Wolfgang Denk
> 

I think there were no problems because CONFIG_SYS_HZ was set to values that
worked for each of the s3c24x0 boards. I only submitted the patch because my
first attempt at a patch for the Embest SBC2440-II was NAK-ed because I'd set
CONFIG_SYS_HZ to the original sbc2410x setting of 1562500 (which worked) - there
was a global change going through to set CONFIG_SYS_HZ to 1000 for all boards
though I'm not sure what the reason was.

I'm happy to withdraw the patch if it's OK to set CONFIG_SYS_HZ to a different
value than 1000?


__________ Information from ESET NOD32 Antivirus, version of virus signature database 4403 (20090907) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com