* [U-Boot] [PATCH 1/2] ppc: Clean up calling of misc_init_r() during init
@ 2009-09-17 3:03 Peter Tyser
2009-09-17 3:03 ` [U-Boot] [PATCH 2/2] ppc: Clean up calling of phy_reset() " Peter Tyser
` (2 more replies)
0 siblings, 3 replies; 5+ messages in thread
From: Peter Tyser @ 2009-09-17 3:03 UTC (permalink / raw)
To: u-boot
Remove board-specific #ifdefs for calling misc_init_r() during
initializtion
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
---
include/configs/CCM.h | 1 +
include/configs/CPCI405.h | 1 +
include/configs/CPCI4052.h | 1 +
include/configs/CPCI405AB.h | 1 +
include/configs/CPCI405DT.h | 1 +
include/configs/W7OLMC.h | 1 +
include/configs/W7OLMG.h | 1 +
include/configs/cogent_mpc8260.h | 1 +
include/configs/cogent_mpc8xx.h | 1 +
include/configs/lwmon.h | 5 +++--
include/configs/pcu_e.h | 2 ++
include/configs/sc3.h | 1 +
lib_ppc/board.c | 12 +-----------
13 files changed, 16 insertions(+), 13 deletions(-)
diff --git a/include/configs/CCM.h b/include/configs/CCM.h
index d1c293f..8a94420 100644
--- a/include/configs/CCM.h
+++ b/include/configs/CCM.h
@@ -37,6 +37,7 @@
#define CONFIG_MPC860 1 /* This is a MPC860 CPU ... */
#define CONFIG_CCM 1 /* on a Card Controller Module */
+#define CONFIG_MISC_INIT_R /* Call misc_init_r() */
#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
#undef CONFIG_8xx_CONS_SMC2
diff --git a/include/configs/CPCI405.h b/include/configs/CPCI405.h
index fca6de0..d131aea 100644
--- a/include/configs/CPCI405.h
+++ b/include/configs/CPCI405.h
@@ -38,6 +38,7 @@
#define CONFIG_CPCI405 1 /* ...on a CPCI405 board */
#define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */
+#define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */
#define CONFIG_SYS_CLK_FREQ 33000000 /* external frequency to pll */
diff --git a/include/configs/CPCI4052.h b/include/configs/CPCI4052.h
index fd04566..07c4e35 100644
--- a/include/configs/CPCI4052.h
+++ b/include/configs/CPCI4052.h
@@ -40,6 +40,7 @@
#undef CONFIG_CPCI405_6U /* enable this for 6U boards */
#define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */
+#define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */
#define CONFIG_SYS_CLK_FREQ 33330000 /* external frequency to pll */
diff --git a/include/configs/CPCI405AB.h b/include/configs/CPCI405AB.h
index d718ed4..c78552b 100644
--- a/include/configs/CPCI405AB.h
+++ b/include/configs/CPCI405AB.h
@@ -40,6 +40,7 @@
#define CONFIG_CPCI405AB 1 /* ...and special AB version */
#define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */
+#define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */
#define CONFIG_SYS_CLK_FREQ 33330000 /* external frequency to pll */
diff --git a/include/configs/CPCI405DT.h b/include/configs/CPCI405DT.h
index 09df470..59e0778 100644
--- a/include/configs/CPCI405DT.h
+++ b/include/configs/CPCI405DT.h
@@ -39,6 +39,7 @@
#define CONFIG_CPCI405_VER2 1 /* ...version 2 */
#define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */
+#define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */
#define CONFIG_SYS_CLK_FREQ 33330000 /* external frequency to pll */
diff --git a/include/configs/W7OLMC.h b/include/configs/W7OLMC.h
index 40e4735..c017915 100644
--- a/include/configs/W7OLMC.h
+++ b/include/configs/W7OLMC.h
@@ -40,6 +40,7 @@
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
#define CONFIG_MISC_INIT_F 1 /* and misc_init_f() */
+#define CONFIG_MISC_INIT_R 1 /* and misc_init_r() */
#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */
diff --git a/include/configs/W7OLMG.h b/include/configs/W7OLMG.h
index a62f1b4..1d4ad13 100644
--- a/include/configs/W7OLMG.h
+++ b/include/configs/W7OLMG.h
@@ -40,6 +40,7 @@
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
#define CONFIG_MISC_INIT_F 1 /* and misc_init_f() */
+#define CONFIG_MISC_INIT_R 1 /* and misc_init_r() */
#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */
diff --git a/include/configs/cogent_mpc8260.h b/include/configs/cogent_mpc8260.h
index c580230..566565a 100644
--- a/include/configs/cogent_mpc8260.h
+++ b/include/configs/cogent_mpc8260.h
@@ -38,6 +38,7 @@
#define CONFIG_CPM2 1 /* Has a CPM2 */
#define CONFIG_MISC_INIT_F 1 /* Use misc_init_f() */
+#define CONFIG_MISC_INIT_R /* Use misc_init_r() */
/* Cogent Modular Architecture options */
#define CONFIG_CMA282 1 /* ...on a CMA282 CPU module */
diff --git a/include/configs/cogent_mpc8xx.h b/include/configs/cogent_mpc8xx.h
index 17bd9a0..750c0df 100644
--- a/include/configs/cogent_mpc8xx.h
+++ b/include/configs/cogent_mpc8xx.h
@@ -37,6 +37,7 @@
#define CONFIG_COGENT 1 /* using Cogent Modular Architecture */
#define CONFIG_MISC_INIT_F 1 /* Use misc_init_f() */
+#define CONFIG_MISC_INIT_R /* Use misc_init_r() */
/* Cogent Modular Architecture options */
#define CONFIG_CMA286_60_OLD 1 /* ...on an old CMA286-60 CPU module */
diff --git a/include/configs/lwmon.h b/include/configs/lwmon.h
index 8f00773..be20d72 100644
--- a/include/configs/lwmon.h
+++ b/include/configs/lwmon.h
@@ -47,8 +47,9 @@
#define CONFIG_OVERWRITE_ETHADDR_ONCE 1
#endif
-#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
-#define CONFIG_BOARD_POSTCLK_INIT 1 /* Call board_postclk_init */
+#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f() */
+#define CONFIG_BOARD_POSTCLK_INIT 1 /* Call board_postclk_init() */
+#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r() */
#define CONFIG_LCD 1 /* use LCD controller ... */
#define CONFIG_HLD1045 1 /* ... with a HLD1045 display */
diff --git a/include/configs/pcu_e.h b/include/configs/pcu_e.h
index 6517381..11ad9ca 100644
--- a/include/configs/pcu_e.h
+++ b/include/configs/pcu_e.h
@@ -42,6 +42,8 @@
#define CONFIG_MPC860T 1
#define CONFIG_PCU_E 1 /* ...on a PCU E board */
+#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r() */
+
#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
#define CONFIG_BAUDRATE 9600
diff --git a/include/configs/sc3.h b/include/configs/sc3.h
index 7e00ab8..5763760 100644
--- a/include/configs/sc3.h
+++ b/include/configs/sc3.h
@@ -63,6 +63,7 @@
#define CONFIG_405GP 1
#define CONFIG_BOARD_EARLY_INIT_F 1
+#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r() */
/*
* Define IDE_USES_ISA_EMULATION for slower IDE access in the ISA-IO address range
diff --git a/lib_ppc/board.c b/lib_ppc/board.c
index e8509ee..c6fb6fe 100644
--- a/lib_ppc/board.c
+++ b/lib_ppc/board.c
@@ -921,17 +921,7 @@ void board_init_r (gd_t *id, ulong dest_addr)
/* Initialize the console (after the relocation and devices init) */
console_init_r ();
-#if defined(CONFIG_CCM) || \
- defined(CONFIG_COGENT) || \
- defined(CONFIG_CPCI405) || \
- defined(CONFIG_EVB64260) || \
- defined(CONFIG_KUP4K) || \
- defined(CONFIG_KUP4X) || \
- defined(CONFIG_LWMON) || \
- defined(CONFIG_PCU_E) || \
- defined(CONFIG_SC3) || \
- defined(CONFIG_W7O) || \
- defined(CONFIG_MISC_INIT_R)
+#if defined(CONFIG_MISC_INIT_R)
/* miscellaneous platform dependent initialisations */
misc_init_r ();
#endif
--
1.6.2.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [U-Boot] [PATCH 2/2] ppc: Clean up calling of phy_reset() during init
2009-09-17 3:03 [U-Boot] [PATCH 1/2] ppc: Clean up calling of misc_init_r() during init Peter Tyser
@ 2009-09-17 3:03 ` Peter Tyser
2009-09-22 21:05 ` Wolfgang Denk
2009-09-17 6:05 ` [U-Boot] [PATCH 1/2] ppc: Clean up calling of misc_init_r() " Heiko Schocher
2009-09-22 21:04 ` Wolfgang Denk
2 siblings, 1 reply; 5+ messages in thread
From: Peter Tyser @ 2009-09-17 3:03 UTC (permalink / raw)
To: u-boot
Remove board-specific #ifdefs for calling phy_reset() during
initializtion
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
---
include/configs/CCM.h | 1 +
include/configs/ELPT860.h | 1 +
include/configs/IP860.h | 1 +
include/configs/IVML24.h | 2 ++
include/configs/IVMS8.h | 2 ++
include/configs/MPC8260ADS.h | 1 +
include/configs/MPC8266ADS.h | 1 +
include/configs/MPC8560ADS.h | 1 +
include/configs/RPXsuper.h | 1 +
include/configs/SBC8540.h | 1 +
include/configs/SPD823TS.h | 2 ++
include/configs/pcu_e.h | 1 +
include/configs/sbc8560.h | 1 +
include/configs/stxgp3.h | 1 +
lib_ppc/board.c | 17 +----------------
15 files changed, 18 insertions(+), 16 deletions(-)
diff --git a/include/configs/CCM.h b/include/configs/CCM.h
index 8a94420..3f4a2c1 100644
--- a/include/configs/CCM.h
+++ b/include/configs/CCM.h
@@ -38,6 +38,7 @@
#define CONFIG_MPC860 1 /* This is a MPC860 CPU ... */
#define CONFIG_CCM 1 /* on a Card Controller Module */
#define CONFIG_MISC_INIT_R /* Call misc_init_r() */
+#define CONFIG_RESET_PHY_R 1 /* Call reset_phy() */
#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
#undef CONFIG_8xx_CONS_SMC2
diff --git a/include/configs/ELPT860.h b/include/configs/ELPT860.h
index ff58ea9..0f56302 100644
--- a/include/configs/ELPT860.h
+++ b/include/configs/ELPT860.h
@@ -57,6 +57,7 @@
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
+#define CONFIG_RESET_PHY_R 1 /* Call reset_phy() */
/* BOOT arguments */
#define CONFIG_PREBOOT \
diff --git a/include/configs/IP860.h b/include/configs/IP860.h
index 125aa6c..be63ea5 100644
--- a/include/configs/IP860.h
+++ b/include/configs/IP860.h
@@ -36,6 +36,7 @@
#define CONFIG_MPC860 1 /* This is a MPC860 CPU */
#define CONFIG_IP860 1 /* ...on a IP860 board */
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
+#define CONFIG_RESET_PHY_R 1 /* Call reset_phy() */
#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
#define CONFIG_BAUDRATE 9600
diff --git a/include/configs/IVML24.h b/include/configs/IVML24.h
index cd100df..1a4924e 100644
--- a/include/configs/IVML24.h
+++ b/include/configs/IVML24.h
@@ -52,6 +52,8 @@
#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
#define CONFIG_8xx_GCLK_FREQ 50331648
+#define CONFIG_RESET_PHY_R 1 /* Call reset_phy() */
+
#define CONFIG_SHOW_BOOT_PROGRESS 1 /* Show boot progress on LEDs */
#if 0
diff --git a/include/configs/IVMS8.h b/include/configs/IVMS8.h
index 125cb4b..256cabd 100644
--- a/include/configs/IVMS8.h
+++ b/include/configs/IVMS8.h
@@ -49,6 +49,8 @@
#undef CONFIG_8xx_CONS_NONE
#define CONFIG_BAUDRATE 115200
+#define CONFIG_RESET_PHY_R 1 /* Call reset_phy() */
+
#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
#define CONFIG_8xx_GCLK_FREQ 50331648
diff --git a/include/configs/MPC8260ADS.h b/include/configs/MPC8260ADS.h
index 942a4cc..52dd4e7 100644
--- a/include/configs/MPC8260ADS.h
+++ b/include/configs/MPC8260ADS.h
@@ -81,6 +81,7 @@
#endif /* CONFIG_ADSTYPE == CONFIG_SYS_8272ADS */
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
+#define CONFIG_RESET_PHY_R 1 /* Call reset_phy() */
/* allow serial and ethaddr to be overwritten */
#define CONFIG_ENV_OVERWRITE
diff --git a/include/configs/MPC8266ADS.h b/include/configs/MPC8266ADS.h
index 4fd86d3..b0162c3 100644
--- a/include/configs/MPC8266ADS.h
+++ b/include/configs/MPC8266ADS.h
@@ -54,6 +54,7 @@
#define CONFIG_CPM2 1 /* Has a CPM2 */
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
+#define CONFIG_RESET_PHY_R 1 /* Call reset_phy() */
/* allow serial and ethaddr to be overwritten */
#define CONFIG_ENV_OVERWRITE
diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h
index c1a1a6d..8ddce5c 100644
--- a/include/configs/MPC8560ADS.h
+++ b/include/configs/MPC8560ADS.h
@@ -48,6 +48,7 @@
#undef CONFIG_ETHER_ON_FCC /* cpm FCC ethernet support */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_FSL_LAW 1 /* Use common FSL init code */
+#define CONFIG_RESET_PHY_R 1 /* Call reset_phy() */
/*
* sysclk for MPC85xx
diff --git a/include/configs/RPXsuper.h b/include/configs/RPXsuper.h
index e97ef95..da962f3 100644
--- a/include/configs/RPXsuper.h
+++ b/include/configs/RPXsuper.h
@@ -189,6 +189,7 @@
#define CONFIG_CPM2 1 /* Has a CPM2 */
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
+#define CONFIG_RESET_PHY_R 1 /* Call reset_phy() */
/*
* Miscellaneous configurable options
diff --git a/include/configs/SBC8540.h b/include/configs/SBC8540.h
index 7239f84..272b5dd 100644
--- a/include/configs/SBC8540.h
+++ b/include/configs/SBC8540.h
@@ -77,6 +77,7 @@
#undef CONFIG_BTB /* toggle branch predition */
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
+#define CONFIG_RESET_PHY_R 1 /* Call reset_phy() */
#undef CONFIG_SYS_DRAM_TEST /* memory test, takes time */
#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest region */
diff --git a/include/configs/SPD823TS.h b/include/configs/SPD823TS.h
index 4181a40..fa77882 100644
--- a/include/configs/SPD823TS.h
+++ b/include/configs/SPD823TS.h
@@ -36,6 +36,8 @@
#define CONFIG_MPC823 1 /* This is a MPC823 CPU */
#define CONFIG_SPD823TS 1 /* ...on a SPD823TS board */
+#define CONFIG_RESET_PHY_R 1 /* Call reset_phy() */
+
#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
#undef CONFIG_8xx_CONS_SMC2
#undef CONFIG_8xx_CONS_NONE
diff --git a/include/configs/pcu_e.h b/include/configs/pcu_e.h
index 11ad9ca..3aee206 100644
--- a/include/configs/pcu_e.h
+++ b/include/configs/pcu_e.h
@@ -43,6 +43,7 @@
#define CONFIG_PCU_E 1 /* ...on a PCU E board */
#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r() */
+#define CONFIG_RESET_PHY_R 1 /* Call reset_phy() */
#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
diff --git a/include/configs/sbc8560.h b/include/configs/sbc8560.h
index 4fa501d..46c94bf 100644
--- a/include/configs/sbc8560.h
+++ b/include/configs/sbc8560.h
@@ -71,6 +71,7 @@
#undef CONFIG_BTB /* toggle branch predition */
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
+#define CONFIG_RESET_PHY_R 1 /* Call reset_phy() */
#undef CONFIG_SYS_DRAM_TEST /* memory test, takes time */
#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest region */
diff --git a/include/configs/stxgp3.h b/include/configs/stxgp3.h
index 0424e29..86b231c 100644
--- a/include/configs/stxgp3.h
+++ b/include/configs/stxgp3.h
@@ -66,6 +66,7 @@
#define CONFIG_BTB /* toggle branch predition */
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
+#define CONFIG_RESET_PHY_R 1 /* Call reset_phy() */
#undef CONFIG_SYS_DRAM_TEST /* memory test, takes time */
#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest region */
diff --git a/lib_ppc/board.c b/lib_ppc/board.c
index c6fb6fe..f9dbdb9 100644
--- a/lib_ppc/board.c
+++ b/lib_ppc/board.c
@@ -1000,22 +1000,7 @@ void board_init_r (gd_t *id, ulong dest_addr)
eth_initialize (bd);
#endif
-#if defined(CONFIG_CMD_NET) && ( \
- defined(CONFIG_CCM) || \
- defined(CONFIG_ELPT860) || \
- defined(CONFIG_EP8260) || \
- defined(CONFIG_IP860) || \
- defined(CONFIG_IVML24) || \
- defined(CONFIG_IVMS8) || \
- defined(CONFIG_MPC8260ADS) || \
- defined(CONFIG_MPC8266ADS) || \
- defined(CONFIG_MPC8560ADS) || \
- defined(CONFIG_PCU_E) || \
- defined(CONFIG_RPXSUPER) || \
- defined(CONFIG_STXGP3) || \
- defined(CONFIG_SPD823TS) || \
- defined(CONFIG_RESET_PHY_R) )
-
+#if defined(CONFIG_CMD_NET) && defined(CONFIG_RESET_PHY_R)
WATCHDOG_RESET ();
debug ("Reset Ethernet PHY\n");
reset_phy ();
--
1.6.2.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [U-Boot] [PATCH 1/2] ppc: Clean up calling of misc_init_r() during init
2009-09-17 3:03 [U-Boot] [PATCH 1/2] ppc: Clean up calling of misc_init_r() during init Peter Tyser
2009-09-17 3:03 ` [U-Boot] [PATCH 2/2] ppc: Clean up calling of phy_reset() " Peter Tyser
@ 2009-09-17 6:05 ` Heiko Schocher
2009-09-22 21:04 ` Wolfgang Denk
2 siblings, 0 replies; 5+ messages in thread
From: Heiko Schocher @ 2009-09-17 6:05 UTC (permalink / raw)
To: u-boot
Hello Peter,
Peter Tyser wrote:
> Remove board-specific #ifdefs for calling misc_init_r() during
> initializtion
>
> Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
> ---
> include/configs/CCM.h | 1 +
> include/configs/CPCI405.h | 1 +
> include/configs/CPCI4052.h | 1 +
> include/configs/CPCI405AB.h | 1 +
> include/configs/CPCI405DT.h | 1 +
> include/configs/W7OLMC.h | 1 +
> include/configs/W7OLMG.h | 1 +
> include/configs/cogent_mpc8260.h | 1 +
> include/configs/cogent_mpc8xx.h | 1 +
> include/configs/lwmon.h | 5 +++--
> include/configs/pcu_e.h | 2 ++
> include/configs/sc3.h | 1 +
> lib_ppc/board.c | 12 +-----------
> 13 files changed, 16 insertions(+), 13 deletions(-)
Acked-by: Heiko Schocher <hs@denx.de>
for the sc3 board, Thanks!
bye
Heiko
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
^ permalink raw reply [flat|nested] 5+ messages in thread
* [U-Boot] [PATCH 1/2] ppc: Clean up calling of misc_init_r() during init
2009-09-17 3:03 [U-Boot] [PATCH 1/2] ppc: Clean up calling of misc_init_r() during init Peter Tyser
2009-09-17 3:03 ` [U-Boot] [PATCH 2/2] ppc: Clean up calling of phy_reset() " Peter Tyser
2009-09-17 6:05 ` [U-Boot] [PATCH 1/2] ppc: Clean up calling of misc_init_r() " Heiko Schocher
@ 2009-09-22 21:04 ` Wolfgang Denk
2 siblings, 0 replies; 5+ messages in thread
From: Wolfgang Denk @ 2009-09-22 21:04 UTC (permalink / raw)
To: u-boot
Dear Peter Tyser,
In message <1253156588-8686-1-git-send-email-ptyser@xes-inc.com> you wrote:
> Remove board-specific #ifdefs for calling misc_init_r() during
> initializtion
>
> Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
> ---
> include/configs/CCM.h | 1 +
> include/configs/CPCI405.h | 1 +
> include/configs/CPCI4052.h | 1 +
> include/configs/CPCI405AB.h | 1 +
> include/configs/CPCI405DT.h | 1 +
> include/configs/W7OLMC.h | 1 +
> include/configs/W7OLMG.h | 1 +
> include/configs/cogent_mpc8260.h | 1 +
> include/configs/cogent_mpc8xx.h | 1 +
> include/configs/lwmon.h | 5 +++--
> include/configs/pcu_e.h | 2 ++
> include/configs/sc3.h | 1 +
> lib_ppc/board.c | 12 +-----------
> 13 files changed, 16 insertions(+), 13 deletions(-)
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
THIS IS A 100% MATTER PRODUCT: In the Unlikely Event That This
Merchandise Should Contact Antimatter in Any Form, a Catastrophic
Explosion Will Result.
^ permalink raw reply [flat|nested] 5+ messages in thread
* [U-Boot] [PATCH 2/2] ppc: Clean up calling of phy_reset() during init
2009-09-17 3:03 ` [U-Boot] [PATCH 2/2] ppc: Clean up calling of phy_reset() " Peter Tyser
@ 2009-09-22 21:05 ` Wolfgang Denk
0 siblings, 0 replies; 5+ messages in thread
From: Wolfgang Denk @ 2009-09-22 21:05 UTC (permalink / raw)
To: u-boot
Dear Peter Tyser,
In message <1253156588-8686-2-git-send-email-ptyser@xes-inc.com> you wrote:
> Remove board-specific #ifdefs for calling phy_reset() during
> initializtion
>
> Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
> ---
> include/configs/CCM.h | 1 +
> include/configs/ELPT860.h | 1 +
> include/configs/IP860.h | 1 +
> include/configs/IVML24.h | 2 ++
> include/configs/IVMS8.h | 2 ++
> include/configs/MPC8260ADS.h | 1 +
> include/configs/MPC8266ADS.h | 1 +
> include/configs/MPC8560ADS.h | 1 +
> include/configs/RPXsuper.h | 1 +
> include/configs/SBC8540.h | 1 +
> include/configs/SPD823TS.h | 2 ++
> include/configs/pcu_e.h | 1 +
> include/configs/sbc8560.h | 1 +
> include/configs/stxgp3.h | 1 +
> lib_ppc/board.c | 17 +----------------
> 15 files changed, 18 insertions(+), 16 deletions(-)
>
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"It takes all sorts of in & out-door schooling to get adapted to my
kind of fooling" - R. Frost
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2009-09-22 21:05 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-09-17 3:03 [U-Boot] [PATCH 1/2] ppc: Clean up calling of misc_init_r() during init Peter Tyser
2009-09-17 3:03 ` [U-Boot] [PATCH 2/2] ppc: Clean up calling of phy_reset() " Peter Tyser
2009-09-22 21:05 ` Wolfgang Denk
2009-09-17 6:05 ` [U-Boot] [PATCH 1/2] ppc: Clean up calling of misc_init_r() " Heiko Schocher
2009-09-22 21:04 ` Wolfgang Denk
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox