From mboxrd@z Thu Jan  1 00:00:00 1970
From: Heiko Schocher <hs@denx.de>
Date: Thu, 17 Sep 2009 14:03:48 +0200
Subject: [U-Boot] [PATCH 1/3] fsl_i2c: Wait for STOP condition to
	propagate
In-Reply-To: <1253178437-32398-1-git-send-email-Joakim.Tjernlund@transmode.se>
References: <1253178437-32398-1-git-send-email-Joakim.Tjernlund@transmode.se>
Message-ID: <4AB225A4.3040904@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hello Joakim,

Joakim Tjernlund wrote:
> After issuing a STOP one must wait until the STOP has completed
> on the bus before doing something new to the controller.
> 
> Also add an extra read of SR as the manual mentions doing that
> is a good idea.
> 
> Remove surplus write of CR just before a write, isn't required and
> could potentially disturb the I2C bus.
> 
> Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
> ---
>  drivers/i2c/fsl_i2c.c |   12 ++++++++----
>  1 files changed, 8 insertions(+), 4 deletions(-)

Applied to u-boot-i2c testing

I applied your 3 patches at the moment to the u-boot-i2c testing branch,
in the hope to see some "Tested-by" ;-)

Thanks.

bye
Heiko
-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany