[U-Boot] [PATCH] OMAP3: Update Overo and Beagle environment

[Tom <Tom.Rix@windriver.com>]

Dirk Behme wrote:
> From: Steve Sakoman <sakoman@gmail.com>
> 
> Update default environment to support new kernel DSS2 subsystem and
> simplify rootfs type and location changes.
> 
> Signed-off-by: Steve Sakoman <sakoman@gmail.com>
> Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
> 
> ---
>  include/configs/omap3_beagle.h |   27 +++++++++++++++++++--------
>  include/configs/omap3_overo.h  |   27 +++++++++++++++++++--------
>  2 files changed, 38 insertions(+), 16 deletions(-)
> 
> Index: u-boot-ti/include/configs/omap3_overo.h
> ===================================================================
> --- u-boot-ti.orig/include/configs/omap3_overo.h
> +++ u-boot-ti/include/configs/omap3_overo.h
> @@ -155,16 +155,27 @@
>  #define CONFIG_EXTRA_ENV_SETTINGS \
>  	"loadaddr=0x82000000\0" \
>  	"console=ttyS2,115200n8\0" \
> -	"videomode=1024x768 at 60,vxres=1024,vyres=768\0" \
> -	"videospec=omapfb:vram:2M,vram:4M\0" \
> +	"vram=12M\0" \
> +	"dvimode=1024x768MR-16 at 60\0" \
> +	"defaultdisplay=dvi\0" \
> +	"mmcroot=/dev/mmcblk0p2 rw\0" \
> +	"mmcrootfstype=ext3 rootwait\0" \
> +	"nandroot=/dev/mtdblock4 rw\0" \
> +	"nandrootfstype=jffs2\0" \
>  	"mmcargs=setenv bootargs console=${console} " \
> -		"video=${videospec},mode:${videomode} " \
> -		"root=/dev/mmcblk0p2 rw " \
> -		"rootfstype=ext3 rootwait\0" \
> +		"vram=${vram} " \
> +		"omapfb.mode=dvi:${dvimode} " \
> +		"omapfb.debug=y " \

Is setting the debug option needed ?
This would seem useful (from the name) only to developers

> +		"omapdss.def_disp=${defaultdisplay} " \
> +		"root=${mmcroot} " \
> +		"rootfstype=${mmcrootfstype}\0" \
>  	"nandargs=setenv bootargs console=${console} " \
> -		"video=${videospec},mode:${videomode} " \
> -		"root=/dev/mtdblock4 rw " \
> -		"rootfstype=jffs2\0" \
> +		"vram=${vram} " \
> +		"omapfb.mode=dvi:${dvimode} " \
> +		"omapfb.debug=y " \
> +		"omapdss.def_disp=${defaultdisplay} " \

 From vram to omapdss.def_disp are common for nand and mmc.
These should be changed to something like

"videoargs= .... "

Similar for beagle.

Tom