From: Sebastian Heutling <heutling@who-ing.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v3] AT91: Add SD/MMC controller support
Date: Thu, 1 Oct 2009 09:22:02 +0200 [thread overview]
Message-ID: <4AC4589A.9000408@who-ing.de> (raw)
Hello there,
I tried to get mmc working on a board using an at91sam9g20. The mmc-card
is wired on slotb.
I applied the patches:
http://lists.denx.de/pipermail/u-boot/2009-September/060053.html
http://lists.denx.de/pipermail/u-boot/2009-August/059456.html
http://lists.denx.de/pipermail/u-boot/2009-September/060243.html
It didn't work as I always got (apart from the message of a too low
clock which I avoided by setting f_min / f_max on my own):
mmc: command 8 failed (status: 0x0010c1e5)
mmc: command 55 failed (status: 0x0010c1e5)
mmc: command 1 failed (status: 0x0010c1e5)
Card did not respond to voltage select!
So I had a look at linux sources and discovered that the MCI selected
the wrong slot. After modifying atmel_mci_set_ios() to set SDCR to use
slotb ("mmci_writel(SDCR, sdcr | 1);") I got my card working.
Hope this helps someone.
Regards
Sebastian Heutling
next reply other threads:[~2009-10-01 7:22 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-10-01 7:22 Sebastian Heutling [this message]
2009-10-01 7:59 ` [U-Boot] AT91 working SD with u-boot Konrad Mattheis
2009-10-01 8:25 ` Sebastian Heutling
2009-10-01 8:33 ` Konrad Mattheis
2009-10-01 9:28 ` Sebastian Heutling
2009-10-04 12:54 ` Albin Tonnerre
2010-05-26 19:03 ` Kalyan
-- strict thread matches above, loose matches on Subject: below --
2009-09-05 12:23 [U-Boot] [PATCH v2] AT91: Add SD/MMC controller support Albin Tonnerre
2009-09-08 20:39 ` [U-Boot] [PATCH v3] " Albin Tonnerre
2009-11-22 21:17 ` Wolfgang Denk
2009-11-23 19:42 ` Albin Tonnerre
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4AC4589A.9000408@who-ing.de \
--to=heutling@who-ing.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox