From mboxrd@z Thu Jan 1 00:00:00 1970 From: Abdoulaye Walsimou Gaye Date: Mon, 05 Oct 2009 18:35:29 +0200 Subject: [U-Boot] [PATCH-ARM 1/4, v2] Clean-up of cpu_arm920t and cpu_arm920t_s3c24x0 code In-Reply-To: <4AC66FDE.4060502@fearnside-systems.co.uk> References: <4ABDFCC9.6010305@fearnside-systems.co.uk> <1f3430fb0909290850tcf0dce0v265974b683459c28@mail.gmail.com> <1f3430fb0909290856t13ac907cg214873240dca4255@mail.gmail.com> <4AC66FDE.4060502@fearnside-systems.co.uk> Message-ID: <4ACA2051.8070807@walsimou.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de kevin.morfitt at fearnside-systems.co.uk a ?crit : > Here are links to the patches and notes on their states: > - [U-boot] [PATCH-ARM] CONFIG_SYS_HZ change for cpu/arm920t/s3c24x0 boards: > http://lists.denx.de/pipermail/u-boot/2009-September/thread.html, > JP said it looked OK but needed testing, then it was tested by Wolfgang > - [U-Boot] [PATCH-ARM 1/4, v2] Clean-up of cpu/arm920t and > cpu/arm920t/s3c24x0 code (this patch): one comment so far (your own) > - [U-Boot] [PATCH-ARM 2/4] Clean-up of s3c24x0 header files: > http://lists.denx.de/pipermail/u-boot/2009-September/060111.html, > no comments as yet > - [U-Boot] [PATCH-ARM 3/4, v2] Clean-up of s3c24x0 drivers excluding nand > driver, http://lists.denx.de/pipermail/u-boot/2009-September/061583.html, > one comment by Gaye Abdoulaye Walsimou, fixed in v2 > - [U-Boot] [PATCH-ARM 4/4, v2] Clean-up of s3c24x0 nand driver, > http://lists.denx.de/pipermail/u-boot/2009-September/061584.html, > v1 was Acked by Scott here - > http://lists.denx.de/pipermail/u-boot/2009-September/060580.html > > >> But there are remained more works for cleaning >> > > My aim is to clean up just the s3c24x0 common code so I can later add support > for the Embest SBC2440-II Board. I can see that the rest of the arm920t code > also needs cleaning but this would be a much bigger job and could be done > later - I'd rather limit these patches to s3c24x0 code. > > >> please use lower case name at C structure's members and functions >> > > I think I have changed all structure names to lower case in the s3c24x0 code. > I also think I've changed all function names to lower case except where > the change would affect too many other areas - for example, if I change > get_HCLK() to get_hclk() in cpu/arm920t/s3c24x0/speed.c I'd also need to > change the same in include/common.h, cpu/lh7a40x, arm920t/imx and > arm1176/s3c64xx and all functions that call get_HCLK() throughout u-boot. > Again, this does need doing but could be done later. > Kevin, As nobody seems to have an objection about your changes, I think you can just go ahead and make available changes to support s3c2440 and your board. Cheers,