[U-Boot] [PATCH-ARM 1/4, v2] Clean-up of cpu_arm920t and cpu_arm920t_s3c24x0 code

[kevin.morfitt at fearnside-systems.co.uk <kevin.morfitt@fearnside-systems.co.uk>]

Abdoulaye Walsimou Gaye wrote:
> kevin.morfitt at fearnside-systems.co.uk a ?crit :
>> Here are links to the patches and notes on their states:
>> - [U-boot] [PATCH-ARM] CONFIG_SYS_HZ change for cpu/arm920t/s3c24x0 boards:
>>   http://lists.denx.de/pipermail/u-boot/2009-September/thread.html, 
>>   JP said it looked OK but needed testing, then it was tested by Wolfgang
>> - [U-Boot] [PATCH-ARM 1/4, v2] Clean-up of cpu/arm920t and 
>>   cpu/arm920t/s3c24x0 code (this patch): one comment so far (your own)
>> - [U-Boot] [PATCH-ARM 2/4] Clean-up of s3c24x0 header files:
>>   http://lists.denx.de/pipermail/u-boot/2009-September/060111.html, 
>>   no comments as yet
>> - [U-Boot] [PATCH-ARM 3/4, v2] Clean-up of s3c24x0 drivers excluding nand 
>>   driver, http://lists.denx.de/pipermail/u-boot/2009-September/061583.html,
>>   one comment by Gaye Abdoulaye Walsimou, fixed in v2
>> - [U-Boot] [PATCH-ARM 4/4, v2] Clean-up of s3c24x0 nand driver,
>>   http://lists.denx.de/pipermail/u-boot/2009-September/061584.html,
>>   v1 was Acked by Scott here - 
>>   http://lists.denx.de/pipermail/u-boot/2009-September/060580.html
>>
>>   
>>> But there are remained more works for cleaning
>>>     
>> My aim is to clean up just the s3c24x0 common code so I can later add support 
>> for the Embest SBC2440-II Board. I can see that the rest of the arm920t code 
>> also needs cleaning but this would be a much bigger job and could be done 
>> later - I'd rather limit these patches to s3c24x0 code. 
>>
>>   
>>> please use lower case name at C structure's members and functions
>>>     
>> I think I have changed all structure names to lower case in the s3c24x0 code.
>> I also think I've changed all function names to lower case except where
>> the change would affect too many other areas - for example, if I change 
>> get_HCLK() to get_hclk() in cpu/arm920t/s3c24x0/speed.c I'd also need to 
>> change the same in include/common.h, cpu/lh7a40x, arm920t/imx and 
>> arm1176/s3c64xx and all functions that call get_HCLK() throughout u-boot. 
>> Again, this does need doing but could be done later.
>>   
> Kevin,
> As nobody seems to have an objection about your changes, I think you can 
> just go ahead and make available
> changes to support s3c2440 and your board.
> 
I've missed the merge window for this u-boot release so I may as well 
submit the s3c2440 and sbc2440-ii board patches after this release.

So far only 1 of the 5 existing patches has been Ack-ed and 1 tested so
I need to get them all accepted by the Samsung ARM custodian for this 
release.

> Cheers,
> 
> 
>