[U-Boot] u-boot-ti next updated

[U-Boot] u-boot-ti next updated

[Paulraj, Sandeep]

All,

I've updated the u-boot-ti next tree with quite a few patches.
There are instances were multiple patches modify the same file.
Can the OMAP 3 boards be tested to see if things are ok?

It will be nice to have this info before I send Tom a pull request some time next week. This pull request will have some DaVinci fixes and updates which I can test by myself :-)

Thanks,
Sandeep

[U-Boot] u-boot-ti next updated

[Dirk Behme]

Paulraj, Sandeep wrote:
> All,
> 
> I've updated the u-boot-ti next tree with quite a few patches.
> There are instances were multiple patches modify the same file.
> Can the OMAP 3 boards be tested to see if things are ok?

Compile test of u-boot-ti/next (head 
c27339b41e49cd89c2ea802a490b175ac7ad89ff "OMAP3: make gpmc_config as 
const") ./MAKEALL ARM_CORTEX_A8:

1. All non-SDP3430 boards have

mem.c: In function 'gpmc_init':
mem.c:250: warning: assignment discards qualifiers from pointer target 
type

2. Zoom2 fails to build with

zoom2.c:54: error: conflicting types for 'enable_gpmc_cs_config'
/include/asm/arch/sys_proto.h:38: error: previous declaration of 
'enable_gpmc_cs_config' was here

3. New SDP3430 has

eth.c:497:2: warning: #warning Ethernet driver is deprecated. Please 
update to use CONFIG_NET_MULTI


Reverting

c27339b41e49cd89c2ea802a490b175ac7ad89ff "OMAP3: make gpmc_config as 
const"

http://git.denx.de/?p=u-boot/u-boot-ti.git;a=commit;h=c27339b41e49cd89c2ea802a490b175ac7ad89ff

fixes 1 + 2. Sounds like this patch needs an update before we should 
apply it.

Best regards

Dirk

[U-Boot] u-boot-ti next updated

[Steve Sakoman]

On Sat, Oct 10, 2009 at 12:38 PM, Paulraj, Sandeep <s-paulraj@ti.com> wrote:
> All,
>
> I've updated the u-boot-ti next tree with quite a few patches.
> There are instances were multiple patches modify the same file.
> Can the OMAP 3 boards be tested to see if things are ok?

Compile and run test of the Overo build was fine with Tobi card.
Later today I will try some of the other daughter cards to make sure
it works with all of them.

Steve

> It will be nice to have this info before I send Tom a pull request some time next week. This pull request will have some DaVinci fixes and updates which I can test by myself :-)
>
> Thanks,
> Sandeep
>

[U-Boot] u-boot-ti next updated

[Steve Sakoman]

On Sun, Oct 11, 2009 at 7:16 AM, Steve Sakoman <sakoman@gmail.com> wrote:

> Compile and run test of the Overo build was fine with Tobi card.
> Later today I will try some of the other daughter cards to make sure
> it works with all of them.

Heh, I spoke too soon!

U-boot appeared to run fine, but it fails in it's main mission in life
-- to load & execute the linux kernel.

Overo hangs after the uncompressing kernel message.

Steve

[U-Boot] u-boot-ti next updated

[Paulraj, Sandeep]

> 
> On Sun, Oct 11, 2009 at 7:16 AM, Steve Sakoman <sakoman@gmail.com> wrote:
> 
> > Compile and run test of the Overo build was fine with Tobi card.
> > Later today I will try some of the other daughter cards to make sure
> > it works with all of them.
> 
> Heh, I spoke too soon!
> 
> U-boot appeared to run fine, but it fails in it's main mission in life
> -- to load & execute the linux kernel.
> 
> Overo hangs after the uncompressing kernel message.
> 
> Steve

That's not good.

Can you be kind enough to take a look at all the changes to

cpu/arm_cortexa8/omap3/mem.c

I am speaking from my DaVinci experience, small mistakes in the DDR timings resulted in similar hangs.

And I can see that it has changed 

http://git.denx.de/?p=u-boot/u-boot-ti.git;a=commitdiff;h=f714f3a12c09260c500e0f7c5ff40f15d66ab579


also this is another commit which affects overro


http://git.denx.de/?p=u-boot/u-boot-ti.git;a=commitdiff;h=5f0ae0c1e2b617c8b453d8862c49c06aef29b8f0


Sandeep

[U-Boot] u-boot-ti next updated

[Dirk Behme]

Steve Sakoman wrote:
> On Sun, Oct 11, 2009 at 7:16 AM, Steve Sakoman <sakoman@gmail.com> wrote:
> 
>> Compile and run test of the Overo build was fine with Tobi card.
>> Later today I will try some of the other daughter cards to make sure
>> it works with all of them.
> 
> Heh, I spoke too soon!
> 
> U-boot appeared to run fine, but it fails in it's main mission in life
> -- to load & execute the linux kernel.
> 
> Overo hangs after the uncompressing kernel message.

Hmm, on beagle it seems to be fine, though.

g78c38ce (see below) is recent head of u-boot-ti/next:

http://git.denx.de/?p=u-boot/u-boot-ti.git;a=commit;h=78c38ce87f7423eedba844e8594cfc5a4fa6051b

Best regards

Dirk

...

U-Boot 2009.08-00514-g78c38ce (Oct 12 2009 - 16:30:03) 

 

OMAP3530-GP ES2.0, CPU-OPP2 L3-165MHz 

OMAP3 Beagle board + LPDDR/NAND 

I2C:   ready 

DRAM:  128 MB 

NAND:  256 MiB 

In:    serial 

Out:   serial 

Err:   serial 

Board revision Ax/Bx 

Die ID #00000000000000000000000000000000 

Hit any key to stop autoboot:  0 

mmc1 is available 

reading uImage 

 

1824144 bytes read 

## Booting kernel from Legacy Image at 80000000 ... 

    Image Name:   Linux-2.6.28-omap1 

    Image Type:   ARM Linux Kernel Image (uncompressed) 

    Data Size:    1824080 Bytes =  1.7 MB 

    Load Address: 80008000 

    Entry Point:  80008000 

    Verifying Checksum ... OK 

    Loading Kernel Image ... OK 

OK 

 

Starting kernel ... 

 

Uncompressing 
Linux....................................................................................................
Linux version 2.6.28-omap1 (kaltsi at kaltsbuntu) (gcc version 4.2.1) #1 
Fri Mar 13 12:58:49 EET 2009
CPU: ARMv7 Processor [411fc082] revision 2 (ARMv7), cr=10c5387f 

CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache 

Machine: OMAP3 Beagle Board
...

[U-Boot] u-boot-ti next updated

[Nishanth Menon]

On Mon, Oct 12, 2009 at 9:41 AM, Dirk Behme <dirk.behme@googlemail.com> wrote:
> Steve Sakoman wrote:
>>
>> On Sun, Oct 11, 2009 at 7:16 AM, Steve Sakoman <sakoman@gmail.com> wrote:
>>
>>> Compile and run test of the Overo build was fine with Tobi card.
>>> Later today I will try some of the other daughter cards to make sure
>>> it works with all of them.
>>
>> Heh, I spoke too soon!
>>
>> U-boot appeared to run fine, but it fails in it's main mission in life
>> -- to load & execute the linux kernel.
>>
>> Overo hangs after the uncompressing kernel message.
>
> Hmm, on beagle it seems to be fine, though.
SDP3430 also seems to boot fine.
Regards,
Nishanth Menon

[U-Boot] u-boot-ti next updated

[Tom Rix]

Steve Sakoman wrote:
> On Sat, Oct 10, 2009 at 12:38 PM, Paulraj, Sandeep <s-paulraj@ti.com> wrote:
>> All,
>>
>> I've updated the u-boot-ti next tree with quite a few patches.
>> There are instances were multiple patches modify the same file.
>> Can the OMAP 3 boards be tested to see if things are ok?
> 
> Compile and run test of the Overo build was fine with Tobi card.
> Later today I will try some of the other daughter cards to make sure
> it works with all of them.
> 
> Steve
> 
>> It will be nice to have this info before I send Tom a pull request some time next week. This pull request will have some DaVinci fixes and updates which I can test by myself :-)
>>
>> Thanks,
>> Sandeep
>>

Normally I could test most of the omap3 boards.

I have been having email troubles so I have enabled this
account tom at bumblecow.com to be my backup.

Tom

> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
> 
>