[U-Boot] u-boot-ti next updated

[Dirk Behme <dirk.behme@googlemail.com>]

Steve Sakoman wrote:
> On Sun, Oct 11, 2009 at 7:16 AM, Steve Sakoman <sakoman@gmail.com> wrote:
> 
>> Compile and run test of the Overo build was fine with Tobi card.
>> Later today I will try some of the other daughter cards to make sure
>> it works with all of them.
> 
> Heh, I spoke too soon!
> 
> U-boot appeared to run fine, but it fails in it's main mission in life
> -- to load & execute the linux kernel.
> 
> Overo hangs after the uncompressing kernel message.

Hmm, on beagle it seems to be fine, though.

g78c38ce (see below) is recent head of u-boot-ti/next:

http://git.denx.de/?p=u-boot/u-boot-ti.git;a=commit;h=78c38ce87f7423eedba844e8594cfc5a4fa6051b

Best regards

Dirk

...

U-Boot 2009.08-00514-g78c38ce (Oct 12 2009 - 16:30:03) 

 

OMAP3530-GP ES2.0, CPU-OPP2 L3-165MHz 

OMAP3 Beagle board + LPDDR/NAND 

I2C:   ready 

DRAM:  128 MB 

NAND:  256 MiB 

In:    serial 

Out:   serial 

Err:   serial 

Board revision Ax/Bx 

Die ID #00000000000000000000000000000000 

Hit any key to stop autoboot:  0 

mmc1 is available 

reading uImage 

 

1824144 bytes read 

## Booting kernel from Legacy Image at 80000000 ... 

    Image Name:   Linux-2.6.28-omap1 

    Image Type:   ARM Linux Kernel Image (uncompressed) 

    Data Size:    1824080 Bytes =  1.7 MB 

    Load Address: 80008000 

    Entry Point:  80008000 

    Verifying Checksum ... OK 

    Loading Kernel Image ... OK 

OK 

 

Starting kernel ... 

 

Uncompressing 
Linux....................................................................................................
Linux version 2.6.28-omap1 (kaltsi at kaltsbuntu) (gcc version 4.2.1) #1 
Fri Mar 13 12:58:49 EET 2009
CPU: ARMv7 Processor [411fc082] revision 2 (ARMv7), cr=10c5387f 

CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache 

Machine: OMAP3 Beagle Board
...