From: Tom Rix <tom@bumblecow.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] ARM pull request v3
Date: Tue, 13 Oct 2009 07:55:10 -0500 [thread overview]
Message-ID: <4AD478AE.10302@bumblecow.com> (raw)
Wolfgang,
I have cleaned up the commits to arm/master-sync.
The cleanup is from doing a
git rev-list --reverse master..arm/master
Then working back from my notes to take only the commits
were either misc arm or other arm pull requests.
These were cherry picked on top of the current u-boot/master.
I ran the MAKEALL regression and the results look like
what I posted on Sunday.
That said, it would be a good idea to wait a bit for others to
review this list and pick up on anything that I missed.
I will be offline for about 10hrs and will fix any problems
then.
Tom
The following changes since commit 14abfe361b3ed23b02f564e2f5d663e158cd5799:
Wolfgang Denk (1):
Merge branch 'master' of /home/wd/git/u-boot/custodians
are available in the git repository at:
git://git.denx.de/u-boot-arm master-sync
Daniel Gorsulowski (1):
at91: Update MEESC board support
Dirk Behme (1):
OMAP3 MMC: Fix warning dereferencing type-punned pointer
Olof Johansson (3):
OMAP3: Clean up whitespace in mux configs
SMC911X: Add chip auto detection
TI: OMAP3: Overo Tobi ethernet support
Prafulla Wadaskar (2):
Kirkwood: rd6281a: Add kwbimage build support
Kirkwood: mv88f6281gtw_ge: Add kwbimage build support
Sandeep Paulraj (9):
TI DaVinci: Remove references to SZ_xx
TI DaVinci: DM6446: Fix Compilation error in NAND mode
TI DaVinci: DM646x: Initial Support for DM646x SOC
TI DaVinci: DM355: Config Cleanup and Update
TI DaVinci DM365: Removing header file which does not exist
TI: DaVinci DM365: Minor config cleanup
TI: DaVinci DM646x: Update flag used to represent DM646x SOC's
TI: DaVinci: GPIO header file and definitions
TI: DaVinci DM365: Enabling network Support on DM365 EVM
Simon Kagstrom (2):
Support for the OpenRD base board
arm: Correct build with CONFIG_SYS_HUSH_PARSER set
Tom Rix (4):
OMAP3 Move cache routine to cache.S
Add support for Eukrea CPUAT91 SBC
Add support for Eukrea CPU9260/CPU9G20 SBC
TI OMAP3 Use arm init sequence to initialize i2c
MAINTAINERS | 10 +
MAKEALL | 6 +-
Makefile | 17 +
board/Marvell/mv88f6281gtw_ge/config.mk | 3 +
board/Marvell/mv88f6281gtw_ge/kwbimage.cfg | 165 +++++++
board/Marvell/openrd_base/Makefile | 56 +++
board/Marvell/openrd_base/config.mk | 33 ++
board/Marvell/openrd_base/kwbimage.cfg | 168 +++++++
board/Marvell/openrd_base/openrd_base.c | 160 +++++++
board/Marvell/openrd_base/openrd_base.h | 46 ++
board/Marvell/rd6281a/config.mk | 3 +
board/Marvell/rd6281a/kwbimage.cfg | 167 +++++++
board/davinci/dm365evm/dm365evm.c | 44 ++-
board/esd/meesc/meesc.c | 65 +++-
board/eukrea/cpu9260/Makefile | 59 +++
board/eukrea/cpu9260/config.mk | 1 +
board/eukrea/cpu9260/cpu9260.c | 220 +++++++++
board/eukrea/cpu9260/led.c | 153 +++++++
board/eukrea/cpuat91/Makefile | 50 +++
board/eukrea/cpuat91/config.mk | 1 +
board/eukrea/cpuat91/cpuat91.c | 81 ++++
board/logicpd/zoom1/zoom1.h | 164 ++++----
board/logicpd/zoom2/zoom2.h | 188 ++++----
board/overo/overo.c | 59 +++
board/overo/overo.h | 645
++++++++++++++--------------
board/pandora/pandora.h | 662
++++++++++++++--------------
board/ti/beagle/beagle.h | 640
++++++++++++++--------------
board/ti/evm/evm.h | 662
++++++++++++++--------------
board/timll/devkit8000/devkit8000.h | 628
+++++++++++++-------------
cpu/arm920t/at91rm9200/Makefile | 5 +-
cpu/arm920t/at91rm9200/ks8721.c | 249 +++++++++++
cpu/arm926ejs/at91/lowlevel_init.S | 3 +-
cpu/arm926ejs/davinci/Makefile | 1 +
cpu/arm926ejs/davinci/dm646x.c | 41 ++
cpu/arm926ejs/kirkwood/cpu.c | 1 +
cpu/arm_cortexa8/cpu.c | 2 +-
cpu/arm_cortexa8/omap3/Makefile | 2 +-
cpu/arm_cortexa8/omap3/board.c | 2 +-
cpu/arm_cortexa8/omap3/cache.S | 191 ++++++++
cpu/arm_cortexa8/omap3/cache.c | 95 ----
cpu/arm_cortexa8/start.S | 85 ----
drivers/mmc/omap3_mmc.c | 48 +--
drivers/net/smc911x.c | 14 +-
drivers/net/smc911x.h | 7 +-
include/asm-arm/arch-davinci/emac_defs.h | 4 +-
include/asm-arm/arch-davinci/gpio_defs.h | 53 +++
include/asm-arm/arch-davinci/hardware.h | 11 +
include/asm-arm/arch-davinci/nand_defs.h | 2 +-
include/asm-arm/arch-omap3/mmc.h | 7 +
include/asm-arm/arch-omap3/omap3.h | 2 +
include/asm-arm/arch-omap3/sys_proto.h | 2 +-
include/configs/cpu9260.h | 453 +++++++++++++++++++
include/configs/cpuat91.h | 228 ++++++++++
include/configs/davinci_dm355evm.h | 26 +-
include/configs/davinci_dm365evm.h | 11 +-
include/configs/davinci_dvevm.h | 6 +-
include/configs/davinci_schmoogie.h | 3 +-
include/configs/davinci_sffsdr.h | 3 +-
include/configs/davinci_sonata.h | 3 +-
include/configs/devkit8000.h | 1 +
include/configs/meesc.h | 25 +-
include/configs/omap3_beagle.h | 1 +
include/configs/omap3_evm.h | 1 +
include/configs/omap3_overo.h | 18 +-
include/configs/omap3_pandora.h | 1 +
include/configs/omap3_zoom1.h | 1 +
include/configs/omap3_zoom2.h | 1 +
include/configs/openrd_base.h | 220 +++++++++
include/ks8721.h | 78 ++++
69 files changed, 4988 insertions(+), 2075 deletions(-)
create mode 100644 board/Marvell/mv88f6281gtw_ge/kwbimage.cfg
create mode 100644 board/Marvell/openrd_base/Makefile
create mode 100644 board/Marvell/openrd_base/config.mk
create mode 100644 board/Marvell/openrd_base/kwbimage.cfg
create mode 100644 board/Marvell/openrd_base/openrd_base.c
create mode 100644 board/Marvell/openrd_base/openrd_base.h
create mode 100644 board/Marvell/rd6281a/kwbimage.cfg
create mode 100644 board/eukrea/cpu9260/Makefile
create mode 100644 board/eukrea/cpu9260/config.mk
create mode 100644 board/eukrea/cpu9260/cpu9260.c
create mode 100644 board/eukrea/cpu9260/led.c
create mode 100644 board/eukrea/cpuat91/Makefile
create mode 100644 board/eukrea/cpuat91/config.mk
create mode 100644 board/eukrea/cpuat91/cpuat91.c
create mode 100644 cpu/arm920t/at91rm9200/ks8721.c
create mode 100644 cpu/arm926ejs/davinci/dm646x.c
create mode 100644 cpu/arm_cortexa8/omap3/cache.S
delete mode 100644 cpu/arm_cortexa8/omap3/cache.c
create mode 100644 include/asm-arm/arch-davinci/gpio_defs.h
create mode 100644 include/configs/cpu9260.h
create mode 100644 include/configs/cpuat91.h
create mode 100644 include/configs/openrd_base.h
create mode 100644 include/ks8721.h
next reply other threads:[~2009-10-13 12:55 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-10-13 12:55 Tom Rix [this message]
2009-10-13 13:34 ` [U-Boot] ARM pull request v3 Abdoulaye Walsimou Gaye
2009-10-13 14:04 ` Wolfgang Denk
2009-10-13 14:40 ` Paulraj, Sandeep
2009-10-13 14:51 ` Wolfgang Denk
2009-10-13 14:58 ` Simon Kagstrom
2009-10-14 11:18 ` Tom Rix
2009-10-14 11:54 ` Simon Kagstrom
2009-10-13 16:01 ` Dirk Behme
2009-10-13 16:08 ` Paulraj, Sandeep
2009-10-17 5:52 ` Dirk Behme
2009-10-17 13:25 ` Paulraj, Sandeep
2009-10-17 14:22 ` Tom
2009-10-17 22:16 ` Tom
-- strict thread matches above, loose matches on Subject: below --
2009-10-18 22:58 Tom
2009-10-19 0:37 ` Paulraj, Sandeep
2009-10-19 1:53 ` Ben Warren
2009-10-19 8:33 ` Wolfgang Denk
2009-10-19 14:38 ` Dirk Behme
2009-10-20 12:24 ` Tom
2009-10-23 9:28 ` Simon Kagstrom
2009-10-23 13:02 ` Tom
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4AD478AE.10302@bumblecow.com \
--to=tom@bumblecow.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox