[U-Boot] ARM pull request v3

[Abdoulaye Walsimou Gaye <walsimou@walsimou.com>]

Tom Rix a ?crit :
> Wolfgang,
>
> I have cleaned up the commits to arm/master-sync.
>
> The cleanup is from doing a
> git rev-list --reverse master..arm/master
> Then working back from my notes to take only the commits
> were either misc arm or other arm pull requests.
> These were cherry picked on top of the current u-boot/master.
>
> I ran the MAKEALL regression and the results look like
> what I posted on Sunday.
>
> That said, it would be a good idea to wait a bit for others to
> review this list and pick up on anything that I missed.
>
> I will be offline for about 10hrs and will fix any problems
> then.
>
> Tom
>
> The following changes since commit 14abfe361b3ed23b02f564e2f5d663e158cd5799:
>    Wolfgang Denk (1):
>          Merge branch 'master' of /home/wd/git/u-boot/custodians
>
> are available in the git repository at:
>
>    git://git.denx.de/u-boot-arm master-sync
>
> Daniel Gorsulowski (1):
>        at91: Update MEESC board support
>
> Dirk Behme (1):
>        OMAP3 MMC: Fix warning dereferencing type-punned pointer
>
> Olof Johansson (3):
>        OMAP3: Clean up whitespace in mux configs
>        SMC911X: Add chip auto detection
>        TI: OMAP3: Overo Tobi ethernet support
>
> Prafulla Wadaskar (2):
>        Kirkwood: rd6281a: Add kwbimage build support
>        Kirkwood: mv88f6281gtw_ge: Add kwbimage build support
>
> Sandeep Paulraj (9):
>        TI DaVinci: Remove references to SZ_xx
>        TI DaVinci: DM6446: Fix Compilation error in NAND mode
>        TI DaVinci: DM646x: Initial Support for DM646x SOC
>        TI DaVinci: DM355: Config Cleanup and Update
>        TI DaVinci DM365: Removing header file which does not exist
>        TI: DaVinci DM365: Minor config cleanup
>        TI: DaVinci DM646x: Update flag used to represent DM646x SOC's
>        TI: DaVinci: GPIO header file and definitions
>        TI: DaVinci DM365: Enabling network Support on DM365 EVM
>
> Simon Kagstrom (2):
>        Support for the OpenRD base board
>        arm: Correct build with CONFIG_SYS_HUSH_PARSER set
>
> Tom Rix (4):
>        OMAP3 Move cache routine to cache.S
>        Add support for Eukrea CPUAT91 SBC
>        Add support for Eukrea CPU9260/CPU9G20 SBC
>        TI OMAP3 Use arm init sequence to initialize i2c
>   
Tom,
Why this pull request does not include this[1] "sub pull request" from 
samsung repository?

[1]: http://lists.denx.de/pipermail/u-boot/2009-October/062364.html

Thanks