* [U-Boot] Please pull u-boot-ti master v2
@ 2009-10-14 12:59 s-paulraj at ti.com
2009-10-17 22:09 ` Tom
0 siblings, 1 reply; 4+ messages in thread
From: s-paulraj at ti.com @ 2009-10-14 12:59 UTC (permalink / raw)
To: u-boot
Tom,
To the best of my knowledge, the final version of patches for
new boards were submitted after the merge window ended but the
initial versions were submitted before the merge window ended.
Also there are fixes for various compilation warnings.
This pull request will result in 1 new compliation warning.
This is due to SDP 3430 using a deprecated NET driver.
I beleive it is being worked on by Nishanth. Any patch from
him will be on top of the existing SDP 3430 support.
Thanks,
Sandeep
The following changes since commit 5415337f0746123c75b28044ea487171b79a86a2:
Simon Kagstrom (1):
arm: Correct build with CONFIG_SYS_HUSH_PARSER set
are available in the git repository at:
git://git.denx.de/u-boot-ti master
David Brownell (1):
TI OMAP3 SDP3430: Initial Support
Nishanth Menon (4):
OMAP3: export enable_gpmc_cs_config to board files
OMAP3: fix warnings when NAND/ONENAND is not used
OMAP3: Fix SDRC init
TI OMAP3: make gpmc_config as const
Sandeep Paulraj (13):
TI DaVinci DM355: Fix Compilation warning for DM355 EVM
TI DaVinci DM365: Fix Compilation warning for DM365 EVM
TI DaVinci DM646x: Adding initial support for DM6467 EVM
TI: DaVinci: DM355 Leopard board support
TI DaVinci: Maintainer for DM355 and DM365 EVM
TI: OMAP3: Remove SZ_xx references
TI DaVinci DM355: Add Config option for 64 bit Support
TI DaVinci DM365: Add Config option for 64 bit Support
TI DaVinci DVEVM: Add Config option for 64 bit Support
TI DaVinci Sonata: Add Config option for 64 bit Support
TI DaVinci: DM355 Leopard: Fix compilation warning
TI DaVinci: Fix DM6467 EVM Compilation Warning
TI DaVinci: Adding Copyright for DM365 EVM
Steve Sakoman (2):
TI: OMAP3: Refactors the SM911x driver
OMAP3: Update Overo and Beagle environment
Tom Rix (1):
Zoom2 Fix serial gpmc setup
MAINTAINERS | 8 +
MAKEALL | 3 +
Makefile | 9 +
board/davinci/dm355evm/dm355evm.c | 4 +-
board/davinci/dm355leopard/Makefile | 52 ++++
board/davinci/dm355leopard/config.mk | 6 +
board/davinci/dm355leopard/dm355leopard.c | 98 +++++++
board/davinci/dm365evm/dm365evm.c | 5 +-
board/davinci/dm6467evm/Makefile | 52 ++++
board/davinci/dm6467evm/config.mk | 2 +
board/davinci/dm6467evm/dm6467evm.c | 31 +++
board/logicpd/zoom2/zoom2.c | 5 +-
board/ti/sdp3430/Makefile | 49 ++++
board/ti/sdp3430/config.mk | 33 +++
board/ti/sdp3430/sdp.c | 204 ++++++++++++++
board/ti/sdp3430/sdp.h | 417 +++++++++++++++++++++++++++++
cpu/arm_cortexa8/omap3/mem.c | 21 +-
cpu/arm_cortexa8/omap3/sys_info.c | 2 +-
drivers/net/smc911x.c | 12 +-
include/asm-arm/arch-davinci/hardware.h | 2 +
include/asm-arm/arch-omap3/cpu.h | 1 +
include/asm-arm/arch-omap3/mem.h | 8 +-
include/asm-arm/arch-omap3/sys_proto.h | 2 +
include/configs/davinci_dm355evm.h | 1 +
include/configs/davinci_dm355leopard.h | 162 +++++++++++
include/configs/davinci_dm365evm.h | 2 +
include/configs/davinci_dm6467evm.h | 132 +++++++++
include/configs/davinci_dvevm.h | 1 +
include/configs/davinci_sonata.h | 1 +
include/configs/devkit8000.h | 15 +-
include/configs/omap3_beagle.h | 42 ++--
include/configs/omap3_evm.h | 15 +-
include/configs/omap3_overo.h | 42 ++--
include/configs/omap3_pandora.h | 15 +-
include/configs/omap3_sdp3430.h | 369 +++++++++++++++++++++++++
include/configs/omap3_zoom1.h | 15 +-
include/configs/omap3_zoom2.h | 15 +-
37 files changed, 1754 insertions(+), 99 deletions(-)
create mode 100644 board/davinci/dm355leopard/Makefile
create mode 100644 board/davinci/dm355leopard/config.mk
create mode 100644 board/davinci/dm355leopard/dm355leopard.c
create mode 100644 board/davinci/dm6467evm/Makefile
create mode 100644 board/davinci/dm6467evm/config.mk
create mode 100644 board/davinci/dm6467evm/dm6467evm.c
create mode 100644 board/ti/sdp3430/Makefile
create mode 100644 board/ti/sdp3430/config.mk
create mode 100644 board/ti/sdp3430/sdp.c
create mode 100644 board/ti/sdp3430/sdp.h
create mode 100644 include/configs/davinci_dm355leopard.h
create mode 100644 include/configs/davinci_dm6467evm.h
create mode 100644 include/configs/omap3_sdp3430.h
^ permalink raw reply [flat|nested] 4+ messages in thread* [U-Boot] Please pull u-boot-ti master v2
2009-10-14 12:59 [U-Boot] Please pull u-boot-ti master v2 s-paulraj at ti.com
@ 2009-10-17 22:09 ` Tom
2009-10-17 22:24 ` Paulraj, Sandeep
0 siblings, 1 reply; 4+ messages in thread
From: Tom @ 2009-10-17 22:09 UTC (permalink / raw)
To: u-boot
s-paulraj at ti.com wrote:
> Tom,
>
> To the best of my knowledge, the final version of patches for
> new boards were submitted after the merge window ended but the
> initial versions were submitted before the merge window ended.
> Also there are fixes for various compilation warnings.
> This pull request will result in 1 new compliation warning.
> This is due to SDP 3430 using a deprecated NET driver.
> I beleive it is being worked on by Nishanth. Any patch from
> him will be on top of the existing SDP 3430 support.
>
> Thanks,
> Sandeep
>
I have pulled this into arm/master-sync.
Please check to see that all you expect is there.
Tom
> The following changes since commit 5415337f0746123c75b28044ea487171b79a86a2:
> Simon Kagstrom (1):
> arm: Correct build with CONFIG_SYS_HUSH_PARSER set
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-ti master
>
> David Brownell (1):
> TI OMAP3 SDP3430: Initial Support
>
> Nishanth Menon (4):
> OMAP3: export enable_gpmc_cs_config to board files
> OMAP3: fix warnings when NAND/ONENAND is not used
> OMAP3: Fix SDRC init
> TI OMAP3: make gpmc_config as const
>
> Sandeep Paulraj (13):
> TI DaVinci DM355: Fix Compilation warning for DM355 EVM
> TI DaVinci DM365: Fix Compilation warning for DM365 EVM
> TI DaVinci DM646x: Adding initial support for DM6467 EVM
> TI: DaVinci: DM355 Leopard board support
> TI DaVinci: Maintainer for DM355 and DM365 EVM
> TI: OMAP3: Remove SZ_xx references
> TI DaVinci DM355: Add Config option for 64 bit Support
> TI DaVinci DM365: Add Config option for 64 bit Support
> TI DaVinci DVEVM: Add Config option for 64 bit Support
> TI DaVinci Sonata: Add Config option for 64 bit Support
> TI DaVinci: DM355 Leopard: Fix compilation warning
> TI DaVinci: Fix DM6467 EVM Compilation Warning
> TI DaVinci: Adding Copyright for DM365 EVM
>
> Steve Sakoman (2):
> TI: OMAP3: Refactors the SM911x driver
> OMAP3: Update Overo and Beagle environment
>
> Tom Rix (1):
> Zoom2 Fix serial gpmc setup
>
> MAINTAINERS | 8 +
> MAKEALL | 3 +
> Makefile | 9 +
> board/davinci/dm355evm/dm355evm.c | 4 +-
> board/davinci/dm355leopard/Makefile | 52 ++++
> board/davinci/dm355leopard/config.mk | 6 +
> board/davinci/dm355leopard/dm355leopard.c | 98 +++++++
> board/davinci/dm365evm/dm365evm.c | 5 +-
> board/davinci/dm6467evm/Makefile | 52 ++++
> board/davinci/dm6467evm/config.mk | 2 +
> board/davinci/dm6467evm/dm6467evm.c | 31 +++
> board/logicpd/zoom2/zoom2.c | 5 +-
> board/ti/sdp3430/Makefile | 49 ++++
> board/ti/sdp3430/config.mk | 33 +++
> board/ti/sdp3430/sdp.c | 204 ++++++++++++++
> board/ti/sdp3430/sdp.h | 417 +++++++++++++++++++++++++++++
> cpu/arm_cortexa8/omap3/mem.c | 21 +-
> cpu/arm_cortexa8/omap3/sys_info.c | 2 +-
> drivers/net/smc911x.c | 12 +-
> include/asm-arm/arch-davinci/hardware.h | 2 +
> include/asm-arm/arch-omap3/cpu.h | 1 +
> include/asm-arm/arch-omap3/mem.h | 8 +-
> include/asm-arm/arch-omap3/sys_proto.h | 2 +
> include/configs/davinci_dm355evm.h | 1 +
> include/configs/davinci_dm355leopard.h | 162 +++++++++++
> include/configs/davinci_dm365evm.h | 2 +
> include/configs/davinci_dm6467evm.h | 132 +++++++++
> include/configs/davinci_dvevm.h | 1 +
> include/configs/davinci_sonata.h | 1 +
> include/configs/devkit8000.h | 15 +-
> include/configs/omap3_beagle.h | 42 ++--
> include/configs/omap3_evm.h | 15 +-
> include/configs/omap3_overo.h | 42 ++--
> include/configs/omap3_pandora.h | 15 +-
> include/configs/omap3_sdp3430.h | 369 +++++++++++++++++++++++++
> include/configs/omap3_zoom1.h | 15 +-
> include/configs/omap3_zoom2.h | 15 +-
> 37 files changed, 1754 insertions(+), 99 deletions(-)
> create mode 100644 board/davinci/dm355leopard/Makefile
> create mode 100644 board/davinci/dm355leopard/config.mk
> create mode 100644 board/davinci/dm355leopard/dm355leopard.c
> create mode 100644 board/davinci/dm6467evm/Makefile
> create mode 100644 board/davinci/dm6467evm/config.mk
> create mode 100644 board/davinci/dm6467evm/dm6467evm.c
> create mode 100644 board/ti/sdp3430/Makefile
> create mode 100644 board/ti/sdp3430/config.mk
> create mode 100644 board/ti/sdp3430/sdp.c
> create mode 100644 board/ti/sdp3430/sdp.h
> create mode 100644 include/configs/davinci_dm355leopard.h
> create mode 100644 include/configs/davinci_dm6467evm.h
> create mode 100644 include/configs/omap3_sdp3430.h
^ permalink raw reply [flat|nested] 4+ messages in thread
* [U-Boot] Please pull u-boot-ti master v2
2009-10-17 22:09 ` Tom
@ 2009-10-17 22:24 ` Paulraj, Sandeep
2009-10-17 22:36 ` Tom
0 siblings, 1 reply; 4+ messages in thread
From: Paulraj, Sandeep @ 2009-10-17 22:24 UTC (permalink / raw)
To: u-boot
> s-paulraj at ti.com wrote:
> > Tom,
> >
> > To the best of my knowledge, the final version of patches for
> > new boards were submitted after the merge window ended but the
> > initial versions were submitted before the merge window ended.
> > Also there are fixes for various compilation warnings.
> > This pull request will result in 1 new compliation warning.
> > This is due to SDP 3430 using a deprecated NET driver.
> > I beleive it is being worked on by Nishanth. Any patch from
> > him will be on top of the existing SDP 3430 support.
> >
> > Thanks,
> > Sandeep
> >
>
> I have pulled this into arm/master-sync.
> Please check to see that all you expect is there.
> Tom
All the commits seem to be present.
But we have a problem
You became the author of SDP 3430 :-)
http://git.denx.de/?p=u-boot/u-boot-arm.git;a=commit;h=16964de6e32df6c044083fde7f8549452b3cd075
The author is David Brownell
Thanks,
Sandeep
^ permalink raw reply [flat|nested] 4+ messages in thread
* [U-Boot] Please pull u-boot-ti master v2
2009-10-17 22:24 ` Paulraj, Sandeep
@ 2009-10-17 22:36 ` Tom
0 siblings, 0 replies; 4+ messages in thread
From: Tom @ 2009-10-17 22:36 UTC (permalink / raw)
To: u-boot
Paulraj, Sandeep wrote:
>> s-paulraj at ti.com wrote:
>>> Tom,
>>>
>>> To the best of my knowledge, the final version of patches for
>>> new boards were submitted after the merge window ended but the
>>> initial versions were submitted before the merge window ended.
>>> Also there are fixes for various compilation warnings.
>>> This pull request will result in 1 new compliation warning.
>>> This is due to SDP 3430 using a deprecated NET driver.
>>> I beleive it is being worked on by Nishanth. Any patch from
>>> him will be on top of the existing SDP 3430 support.
>>>
>>> Thanks,
>>> Sandeep
>>>
>> I have pulled this into arm/master-sync.
>> Please check to see that all you expect is there.
>> Tom
>
>
> All the commits seem to be present.
> But we have a problem
>
> You became the author of SDP 3430 :-)
> http://git.denx.de/?p=u-boot/u-boot-arm.git;a=commit;h=16964de6e32df6c044083fde7f8549452b3cd075
>
> The author is David Brownell
Ugh!
The only thing I did was to fix a merge conflict.
Tom
>
> Thanks,
> Sandeep
>
>
>
>
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2009-10-17 22:36 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-10-14 12:59 [U-Boot] Please pull u-boot-ti master v2 s-paulraj at ti.com
2009-10-17 22:09 ` Tom
2009-10-17 22:24 ` Paulraj, Sandeep
2009-10-17 22:36 ` Tom
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox