From: Tom <Tom.Rix@windriver.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] ARM pull request
Date: Sun, 18 Oct 2009 15:21:40 -0500 [thread overview]
Message-ID: <4ADB78D4.2060609@windriver.com> (raw)
In-Reply-To: <20091018195640.C02213F6CE@gemini.denx.de>
Wolfgang Denk wrote:
> Dear Tom,
>
> In message <4ADA8080.3060800@windriver.com> you wrote:
>> The following changes since commit a380279b2abe130c2d3d2c8de36f8ff98bc6b3b0:
>> Daniel Gorsulowski (1):
>> at91: Update MEESC board support
>>
>> are available in the git repository at:
>>
>> git://git.denx.de/u-boot-arm master-sync
>>
>> Eric Benard (3):
>> CPU9260 : fix machine ID when using a CPU9G20.
>> fix CPU9260/CPU9G20 compile warnings
>> main.c: In function 'abortboot':
>
> Ummm... This is a terrible commit message, and even worse, I cannot
> find any trace of this patch in the mailing lists? Where is it coming
> from?
>
>> Minkyu Kang (4):
>> s5pc1xx: support Samsung s5pc1xx SoC
>> s5pc1xx: support onenand driver
>> s5pc1xx: support serial driver
>> s5pc1xx: add support SMDKC100 board
>>
>> Nishanth Menon (4):
>> OMAP3: export enable_gpmc_cs_config to board files
>> OMAP3: fix warnings when NAND/ONENAND is not used
>> OMAP3: Fix SDRC init
>> TI OMAP3: make gpmc_config as const
>>
>> Sandeep Paulraj (13):
>> TI DaVinci DM355: Fix Compilation warning for DM355 EVM
>> TI DaVinci DM365: Fix Compilation warning for DM365 EVM
>> TI DaVinci DM646x: Adding initial support for DM6467 EVM
>> TI: DaVinci: DM355 Leopard board support
>> TI DaVinci: Maintainer for DM355 and DM365 EVM
>> TI: OMAP3: Remove SZ_xx references
>> TI DaVinci DM355: Add Config option for 64 bit Support
>> TI DaVinci DM365: Add Config option for 64 bit Support
>> TI DaVinci DVEVM: Add Config option for 64 bit Support
>> TI DaVinci Sonata: Add Config option for 64 bit Support
>> TI DaVinci: DM355 Leopard: Fix compilation warning
>> TI DaVinci: Fix DM6467 EVM Compilation Warning
>> TI DaVinci: Adding Copyright for DM365 EVM
>>
>> Simon Kagstrom (1):
>> arm926ejs: 8-byte align stack to avoid LDRD/STRD problems
>>
>> Steve Sakoman (2):
>> TI: OMAP3: Refactors the SM911x driver
>
> And where is this patch coming from? Again, I canot see a trace of it
> in the mailing list archive, and anyway, it must go through the net
> custodian, or at least have Ben's blessing (Acked-by: line).
>
This came from the last ti pull.
>
>> OMAP3: Update Overo and Beagle environment
>>
>> Tom Rix (2):
>> Zoom2 Fix serial gpmc setup
>> TI OMAP3 SDP3430: Initial Support
>>
>> kevin.morfitt at fearnside-systems.co.uk (5):
>> CONFIG_SYS_HZ fix for ARM902T S3C24X0 Boards
>> Clean-up of cpu_arm920t and cpu_arm920t_s3c24x0 code
>> Clean-up of s3c24x0 header files
>> Clean-up of s3c24x0 drivers excluding nand driver
>> Clean-up of s3c24x0 nand driver
>>
>> MAINTAINERS | 12 +
>> MAKEALL | 4 +
>> Makefile | 12 +
>> board/davinci/dm355evm/dm355evm.c | 4 +-
>> board/davinci/dm355leopard/Makefile | 52 ++
>> board/davinci/dm355leopard/config.mk | 6 +
>> board/davinci/dm355leopard/dm355leopard.c | 98 +++
>> board/davinci/dm365evm/dm365evm.c | 5 +-
>> board/davinci/dm6467evm/Makefile | 52 ++
>> board/davinci/dm6467evm/config.mk | 2 +
>> board/davinci/dm6467evm/dm6467evm.c | 31 +
>> board/eukrea/cpu9260/cpu9260.c | 2 +-
>> board/logicpd/zoom2/zoom2.c | 5 +-
>> board/mpl/vcma9/vcma9.c | 13 +-
>> board/mpl/vcma9/vcma9.h | 20 +-
>> board/samsung/smdk2400/smdk2400.c | 5 +-
>> board/samsung/smdk2410/smdk2410.c | 5 +-
>> board/samsung/smdkc100/Makefile | 55 ++
>> board/samsung/smdkc100/config.mk | 16 +
>> board/samsung/smdkc100/lowlevel_init.S | 215 +++++
>> board/samsung/smdkc100/mem_setup.S | 197 +++++
>> board/samsung/smdkc100/onenand.c | 83 ++
>> board/samsung/smdkc100/smdkc100.c | 51 ++
>> board/sbc2410x/sbc2410x.c | 7 +-
>> board/ti/sdp3430/Makefile | 49 ++
>> board/ti/sdp3430/config.mk | 33 +
>> board/ti/sdp3430/sdp.c | 204 +++++
>> board/ti/sdp3430/sdp.h | 417 +++++++++
>> board/trab/cmd_trab.c | 12 +-
>> board/trab/rs485.c | 12 +-
>> board/trab/trab.c | 17 +-
>> board/trab/trab_fkt.c | 26 +-
>> board/trab/tsc2000.c | 17 +-
>> board/trab/tsc2000.h | 4 +-
>> board/trab/vfd.c | 12 +-
>> common/serial.c | 18 +
>> cpu/arm920t/s3c24x0/interrupts.c | 4 +-
>> cpu/arm920t/s3c24x0/speed.c | 42 +-
>> cpu/arm920t/s3c24x0/timer.c | 110 ++--
>> cpu/arm920t/s3c24x0/usb.c | 30 +-
>> cpu/arm920t/s3c24x0/usb_ohci.c | 1323
>> +++++++++++++++--------------
>> cpu/arm920t/s3c24x0/usb_ohci.h | 209 +++---
>> cpu/arm920t/start.S | 63 +-
>> cpu/arm926ejs/start.S | 1 +
>> cpu/arm_cortexa8/omap3/mem.c | 21 +-
>> cpu/arm_cortexa8/omap3/sys_info.c | 2 +-
>> cpu/arm_cortexa8/s5pc1xx/Makefile | 53 ++
>> cpu/arm_cortexa8/s5pc1xx/cache.c | 43 +
>> cpu/arm_cortexa8/s5pc1xx/clock.c | 308 +++++++
>> cpu/arm_cortexa8/s5pc1xx/cpu_info.c | 57 ++
>> cpu/arm_cortexa8/s5pc1xx/reset.S | 47 +
>> cpu/arm_cortexa8/s5pc1xx/timer.c | 195 +++++
>> doc/README.s5pc1xx | 56 ++
>> drivers/i2c/s3c24x0_i2c.c | 273 +++---
>> drivers/mtd/nand/s3c2410_nand.c | 62 +-
>> drivers/mtd/onenand/Makefile | 1 +
>> drivers/mtd/onenand/samsung.c | 636 ++++++++++++++
>> drivers/net/smc911x.c | 12 +-
>> drivers/rtc/s3c24x0_rtc.c | 130 ++--
>> drivers/serial/Makefile | 1 +
>> drivers/serial/serial_s3c24x0.c | 160 ++--
>> drivers/serial/serial_s5pc1xx.c | 195 +++++
>> include/asm-arm/arch-davinci/hardware.h | 2 +
>> include/asm-arm/arch-omap3/cpu.h | 1 +
>> include/asm-arm/arch-omap3/mem.h | 8 +-
>> include/asm-arm/arch-omap3/sys_proto.h | 2 +
>> include/asm-arm/arch-s5pc1xx/clk.h | 32 +
>> include/asm-arm/arch-s5pc1xx/clock.h | 94 ++
>> include/asm-arm/arch-s5pc1xx/cpu.h | 72 ++
>> include/asm-arm/arch-s5pc1xx/gpio.h | 129 +++
>> include/asm-arm/arch-s5pc1xx/power.h | 42 +
>> include/asm-arm/arch-s5pc1xx/pwm.h | 59 ++
>> include/asm-arm/arch-s5pc1xx/uart.h | 47 +
>> include/configs/cpu9260.h | 1 +
>> include/configs/cpuat91.h | 4 +-
>> include/configs/davinci_dm355evm.h | 1 +
>> include/configs/davinci_dm355leopard.h | 162 ++++
>> include/configs/davinci_dm365evm.h | 2 +
>> include/configs/davinci_dm6467evm.h | 132 +++
>> include/configs/davinci_dvevm.h | 1 +
>> include/configs/davinci_sonata.h | 1 +
>> include/configs/devkit8000.h | 15 +-
>> include/configs/omap3_beagle.h | 42 +-
>> include/configs/omap3_evm.h | 15 +-
>> include/configs/omap3_overo.h | 42 +-
>> include/configs/omap3_pandora.h | 15 +-
>> include/configs/omap3_sdp3430.h | 369 ++++++++
>> include/configs/omap3_zoom1.h | 15 +-
>> include/configs/omap3_zoom2.h | 15 +-
>> include/configs/sbc2410x.h | 4 +-
>> include/configs/smdk2400.h | 4 +-
>> include/configs/smdk2410.h | 4 +-
>> include/configs/smdkc100.h | 242 ++++++
>> include/configs/trab.h | 12 +-
>> include/linux/mtd/onenand.h | 1 +
>> include/linux/mtd/onenand_regs.h | 4 +
>> include/linux/mtd/samsung_onenand.h | 131 +++
>> include/s3c2400.h | 494 +----------
>> include/s3c2410.h | 159 +---
>> include/s3c24x0.h | 605 ++------------
>> include/serial.h | 7 +
>> 101 files changed, 6329 insertions(+), 2465 deletions(-)
>> create mode 100644 board/davinci/dm355leopard/Makefile
>> create mode 100644 board/davinci/dm355leopard/config.mk
>> create mode 100644 board/davinci/dm355leopard/dm355leopard.c
>> create mode 100644 board/davinci/dm6467evm/Makefile
>> create mode 100644 board/davinci/dm6467evm/config.mk
>> create mode 100644 board/davinci/dm6467evm/dm6467evm.c
>> create mode 100644 board/samsung/smdkc100/Makefile
>> create mode 100644 board/samsung/smdkc100/config.mk
>> create mode 100644 board/samsung/smdkc100/lowlevel_init.S
>> create mode 100644 board/samsung/smdkc100/mem_setup.S
>> create mode 100644 board/samsung/smdkc100/onenand.c
>> create mode 100644 board/samsung/smdkc100/smdkc100.c
>> create mode 100644 board/ti/sdp3430/Makefile
>> create mode 100644 board/ti/sdp3430/config.mk
>> create mode 100644 board/ti/sdp3430/sdp.c
>> create mode 100644 board/ti/sdp3430/sdp.h
>> create mode 100644 cpu/arm_cortexa8/s5pc1xx/Makefile
>> create mode 100644 cpu/arm_cortexa8/s5pc1xx/cache.c
>> create mode 100644 cpu/arm_cortexa8/s5pc1xx/clock.c
>> create mode 100644 cpu/arm_cortexa8/s5pc1xx/cpu_info.c
>> create mode 100644 cpu/arm_cortexa8/s5pc1xx/reset.S
>> create mode 100644 cpu/arm_cortexa8/s5pc1xx/timer.c
>> create mode 100644 doc/README.s5pc1xx
>> create mode 100644 drivers/mtd/onenand/samsung.c
>> create mode 100644 drivers/serial/serial_s5pc1xx.c
>> create mode 100644 include/asm-arm/arch-s5pc1xx/clk.h
>> create mode 100644 include/asm-arm/arch-s5pc1xx/clock.h
>> create mode 100644 include/asm-arm/arch-s5pc1xx/cpu.h
>> create mode 100644 include/asm-arm/arch-s5pc1xx/gpio.h
>> create mode 100644 include/asm-arm/arch-s5pc1xx/power.h
>> create mode 100644 include/asm-arm/arch-s5pc1xx/pwm.h
>> create mode 100644 include/asm-arm/arch-s5pc1xx/uart.h
>> create mode 100644 include/configs/davinci_dm355leopard.h
>> create mode 100644 include/configs/davinci_dm6467evm.h
>> create mode 100644 include/configs/omap3_sdp3430.h
>> create mode 100644 include/configs/smdkc100.h
>> create mode 100644 include/linux/mtd/samsung_onenand.h
>
> Sorry, put on hold until I understand what's going on with the two
> patches above.
>
I will fix the subject in at91 patch
and remove the overo net patch
and restore the author of the 3430 sdp patch with a rebase.
I will resend the pull request when done.
Tom
> Best regards,
>
> Wolfgang Denk
>
next prev parent reply other threads:[~2009-10-18 20:21 UTC|newest]
Thread overview: 162+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-10-18 2:42 [U-Boot] ARM pull request Tom
2009-10-18 7:02 ` Dirk Behme
2009-10-18 7:12 ` Dirk Behme
2009-10-18 12:51 ` Minkyu Kang
2009-10-18 15:20 ` Tom
2009-10-18 19:56 ` Wolfgang Denk
2009-10-18 20:21 ` Tom [this message]
2009-10-18 20:28 ` Wolfgang Denk
2009-10-19 0:29 ` Paulraj, Sandeep
2009-10-19 8:29 ` Wolfgang Denk
-- strict thread matches above, loose matches on Subject: below --
2011-06-23 6:34 Albert ARIBAUD
2011-06-23 13:40 ` Wolfgang Denk
2011-06-23 17:36 ` Albert ARIBAUD
2010-05-30 13:52 Tom Rix
2010-05-30 19:43 ` Wolfgang Denk
2010-05-31 4:43 ` Hiremath, Vaibhav
2010-05-31 19:05 ` Marek Vasut
2010-06-07 12:58 ` Tom Rix
2010-05-01 21:50 Tom Rix
2010-05-04 20:56 ` Wolfgang Denk
2010-04-05 12:55 Tom
2010-04-07 22:12 ` Wolfgang Denk
2010-03-22 21:46 Tom
2010-03-22 22:09 ` Wolfgang Denk
2010-03-08 13:55 [U-Boot] Arm " Tom
2010-03-09 14:29 ` Wolfgang Denk
2010-03-07 22:01 [U-Boot] ARM " Tom
2010-03-07 20:37 Tom
2010-02-12 20:06 Tom
2010-02-17 21:29 ` Wolfgang Denk
2010-01-23 15:18 Tom
2010-01-23 16:47 ` Wolfgang Denk
2010-01-23 16:57 ` Tom
2010-01-23 20:51 ` Wolfgang Denk
2010-01-28 5:58 ` Prafulla Wadaskar
2010-01-28 9:41 ` Wolfgang Denk
2010-01-06 18:51 Tom
2010-01-12 22:47 ` Wolfgang Denk
2009-11-30 1:05 Tom
2009-12-01 11:13 ` Wolfgang Denk
2009-12-01 14:34 ` Tom
2009-11-24 15:19 Tom
2009-11-24 22:23 ` Wolfgang Denk
2009-11-04 19:41 [U-Boot] status several (bugfix) patches Remy Bohmer
2009-11-04 19:47 ` Tom
2009-11-04 19:56 ` Remy Bohmer
2009-11-07 23:21 ` [U-Boot] ARM pull request Tom
2009-11-09 21:46 ` Wolfgang Denk
2009-11-04 0:00 [U-Boot] ARM LED weak symbols Tom Rix
2009-11-04 0:00 ` [U-Boot] [PATCH 1/2] ARM Conditionally compile board LED functions Tom Rix
2009-11-04 0:00 ` [U-Boot] [PATCH 2/2] ARM: fix build error with gcc-4.4.2 about inline function declared weak Tom Rix
2009-11-05 20:19 ` Wolfgang Denk
2009-11-05 20:39 ` Tom
2009-11-05 22:38 ` Wolfgang Denk
2009-11-10 19:34 ` Tom
2009-11-10 22:45 ` Wolfgang Denk
2009-11-12 0:43 ` [U-Boot] ARM pull request Tom
2009-11-15 21:39 ` Wolfgang Denk
2009-10-13 2:02 Tom Rix
2009-10-13 2:01 Tom
2009-09-05 1:36 [U-Boot] ARM Pull Request Jean-Christophe PLAGNIOL-VILLARD
2009-09-05 5:37 ` Dirk Behme
2009-09-05 15:37 ` Jean-Christophe PLAGNIOL-VILLARD
2009-09-06 7:12 ` Dirk Behme
2009-09-06 13:16 ` Jean-Christophe PLAGNIOL-VILLARD
2009-09-06 17:59 ` Dirk Behme
2009-09-06 18:37 ` Peter Tyser
2009-09-06 18:40 ` Dirk Behme
2009-09-06 19:09 ` Peter Tyser
2009-09-06 20:21 ` Tom
2009-09-06 21:18 ` Wolfgang Denk
2009-09-06 22:30 ` Tom
2009-09-07 16:01 ` Dirk Behme
2009-09-06 21:16 ` Wolfgang Denk
2009-09-06 20:31 ` Jean-Christophe PLAGNIOL-VILLARD
2009-09-06 9:18 ` Heiko Schocher
2009-09-06 10:05 ` Heiko Schocher
2009-09-07 21:20 ` Wolfgang Denk
2009-09-07 21:18 ` Wolfgang Denk
2009-08-17 23:49 Jean-Christophe PLAGNIOL-VILLARD
2009-08-18 11:54 ` Wolfgang Denk
2009-08-08 10:24 Jean-Christophe PLAGNIOL-VILLARD
2009-08-09 21:49 ` Wolfgang Denk
2009-08-03 7:29 Jean-Christophe PLAGNIOL-VILLARD
2009-08-03 8:20 ` Dirk Behme
2009-08-03 9:44 ` Wolfgang Denk
2009-07-22 22:30 Jean-Christophe PLAGNIOL-VILLARD
2009-07-22 23:04 ` Wolfgang Denk
2009-07-22 23:43 ` Jean-Christophe PLAGNIOL-VILLARD
2009-07-23 17:18 ` Wolfgang Denk
2009-07-24 4:34 ` Prafulla Wadaskar
2009-07-29 17:45 ` Prafulla Wadaskar
2009-07-29 22:31 ` Wolfgang Denk
2009-08-07 6:48 ` Prafulla Wadaskar
2009-07-23 5:39 ` Prafulla Wadaskar
2009-07-23 9:38 ` Wolfgang Denk
2009-07-23 16:21 ` Dirk Behme
2009-07-23 19:15 ` Jean-Christophe PLAGNIOL-VILLARD
2009-07-23 20:14 ` Wolfgang Denk
2009-07-23 20:22 ` Jean-Christophe PLAGNIOL-VILLARD
2009-07-23 20:42 ` Wolfgang Denk
2009-07-27 19:56 ` Jean-Christophe PLAGNIOL-VILLARD
2009-07-27 20:14 ` Wolfgang Denk
2009-07-27 8:16 ` Heiko Schocher
2009-07-27 20:07 ` Jean-Christophe PLAGNIOL-VILLARD
2009-07-28 7:31 ` Heiko Schocher
2009-07-12 21:40 Jean-Christophe PLAGNIOL-VILLARD
2009-07-13 21:45 ` Wolfgang Denk
2009-07-06 19:55 Jean-Christophe PLAGNIOL-VILLARD
2009-07-07 20:20 ` Wolfgang Denk
2009-07-07 21:31 ` Jean-Christophe PLAGNIOL-VILLARD
2009-07-07 21:42 ` Wolfgang Denk
2009-07-07 21:48 ` Jean-Christophe PLAGNIOL-VILLARD
2009-06-09 23:31 Jean-Christophe PLAGNIOL-VILLARD
2009-06-10 21:54 ` Wolfgang Denk
2009-06-11 5:22 ` Prafulla Wadaskar
2009-06-11 8:00 ` Wolfgang Denk
2009-06-11 9:18 ` Prafulla Wadaskar
2009-06-11 10:02 ` Magnus Lilja
2009-06-11 15:02 ` Wolfgang Denk
2009-05-15 9:03 [U-Boot] ARM pull Request Jean-Christophe PLAGNIOL-VILLARD
2009-05-15 19:09 ` Wolfgang Denk
2009-04-30 7:10 [U-Boot] ARM Pull Request Jean-Christophe PLAGNIOL-VILLARD
2009-04-30 21:05 ` Wolfgang Denk
2009-04-05 10:56 Jean-Christophe PLAGNIOL-VILLARD
2009-04-05 12:14 ` Dirk Behme
2009-04-07 19:51 ` Wolfgang Denk
2009-04-05 21:06 ` Wolfgang Denk
2009-03-30 16:42 Jean-Christophe PLAGNIOL-VILLARD
2009-03-30 16:47 ` Jean-Christophe PLAGNIOL-VILLARD
2009-04-01 22:25 ` Wolfgang Denk
2009-03-29 21:09 Jean-Christophe PLAGNIOL-VILLARD
2009-03-29 21:31 ` Wolfgang Denk
2009-03-29 21:16 ` Jean-Christophe PLAGNIOL-VILLARD
2009-03-30 13:33 ` Dirk Behme
2009-03-30 15:08 ` Jean-Christophe PLAGNIOL-VILLARD
2009-03-30 19:33 ` Dirk Behme
2009-03-30 19:49 ` Wolfgang Denk
2009-03-30 20:28 ` Jean-Christophe PLAGNIOL-VILLARD
2009-03-31 15:44 ` Dirk Behme
2009-03-25 21:26 Jean-Christophe PLAGNIOL-VILLARD
2009-03-26 21:22 ` Wolfgang Denk
2009-03-26 23:24 ` Dirk Behme
2009-03-13 22:20 Jean-Christophe PLAGNIOL-VILLARD
2009-03-15 21:10 ` Wolfgang Denk
2009-02-22 17:33 Jean-Christophe PLAGNIOL-VILLARD
2009-02-22 17:49 ` Dirk Behme
2009-02-22 23:30 ` Wolfgang Denk
2009-02-22 21:59 ` Wolfgang Denk
2009-02-18 3:26 Jean-Christophe PLAGNIOL-VILLARD
2009-02-18 23:49 ` Wolfgang Denk
2009-02-01 13:32 Jean-Christophe PLAGNIOL-VILLARD
2009-02-01 20:39 ` Wolfgang Denk
2008-11-21 0:46 [U-Boot] ARM pull request Jean-Christophe PLAGNIOL-VILLARD
2008-11-23 12:59 ` Dirk Behme
2008-11-25 11:05 ` Wolfgang Denk
2008-11-02 16:12 [U-Boot] ARM Pull request Jean-Christophe PLAGNIOL-VILLARD
2008-11-08 23:33 ` Wolfgang Denk
2008-11-09 20:22 ` Alessandro Rubini
2008-10-08 17:09 [U-Boot] ARM Pull Request Jean-Christophe PLAGNIOL-VILLARD
2008-10-12 21:57 ` Wolfgang Denk
2008-10-06 12:29 [U-Boot] Arm Pull request Jean-Christophe PLAGNIOL-VILLARD
2008-09-15 19:16 [U-Boot] ARM Pull Request Jean-Christophe PLAGNIOL-VILLARD
2008-09-15 22:11 ` Wolfgang Denk
2008-09-16 8:14 ` Jean-Christophe PLAGNIOL-VILLARD
2008-09-16 10:24 ` Wolfgang Denk
2008-09-11 23:29 Jean-Christophe PLAGNIOL-VILLARD
2008-09-12 13:22 ` Wolfgang Denk
2008-08-25 21:04 [U-Boot] ARM Pull request Jean-Christophe PLAGNIOL-VILLARD
2008-08-25 21:46 ` Wolfgang Denk
2008-08-26 5:59 ` Jens Gehrlein
2008-08-26 21:19 ` Wolfgang Denk
2008-08-11 23:41 [U-Boot] arm pull request Jean-Christophe PLAGNIOL-VILLARD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4ADB78D4.2060609@windriver.com \
--to=tom.rix@windriver.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox