From mboxrd@z Thu Jan  1 00:00:00 1970
From: Tom <Tom.Rix@windriver.com>
Date: Sat, 24 Oct 2009 15:44:23 -0500
Subject: [U-Boot] [PATCH v2 0/4] add TI DA8xx support:
In-Reply-To: <4AE186AA.2040909@gefanuc.com>
References: <4AE186AA.2040909@gefanuc.com>
Message-ID: <4AE36727.9000909@windriver.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Nick Thompson wrote:
> Add initial support for DA8xx SoC's and the spectrum digital DA830 EVM board.
> 
> DA8xx is similar to DaVinci devices, but has a differing memory map and
> updated peripherals. It is intended that DaVinci drivers will be modified in
> some way to support these differences.
> 
> A side effect of this is that there are some legacy code constructs in this
> patch set that are required to utilise the DaVinci drivers as they stand now.
> For example there are some volatiles and memory pointer types defined that are
> no longer considered acceptable.
> 
> The new code in this patch set doesn't use these constructs and the remaining
> artifacts can be removed when the DaVinci drivers stop using them.
> 
> ---
> Changes from previous patch set:
> 
> Removed Ethernet support (will add after davinci_emac has been patched)
> Moved board support to DaVinci directory for easier driver integration.
> Patch set run through checkpatch. (remaining WARNINGS should be justifiable)
> Removed unused code.
> Addressed comments on v1 Patch set.
> 

I ran this patchset against u-boot-ti/master.

Please check on this error.

dv_board.c:41:32: error: asm/arch/emac_defs.h: No such file or directory
make[1]: *** No rule to make target 
`/work/test/u-boot/t-da8xx/DATE/build/board/davinci/da830evm/.depend', 
needed by 
`/work/test/u-boot/t-da8xx/2009_10_24_14_39/build/board/davinci/da830evm/libda830evm.a'. 
  Stop.
make: *** 
[/work/test/u-boot/t-da8xx/DATE/build/board/davinci/da830evm/libda830evm.a] 
Error 2

Tom

> Nick.
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot