* [U-Boot] MAC address setting
@ 2009-10-27 12:04 J.H.Kim
2009-10-27 12:35 ` Jerry Van Baren
0 siblings, 1 reply; 2+ messages in thread
From: J.H.Kim @ 2009-10-27 12:04 UTC (permalink / raw)
To: u-boot
Hi, everyone
I'm using AT91SAM9260 board.
I'm now loading the kernel with serial cable.
But it is too slow.
So, I'm going to use tftp.
When ftpbootm, u-boot told me to specify ethernet address.
How I can find ethernet mac address?
Thanks in advance.
Best Regards,
J.Hwan Kim
^ permalink raw reply [flat|nested] 2+ messages in thread
* [U-Boot] MAC address setting
2009-10-27 12:04 [U-Boot] MAC address setting J.H.Kim
@ 2009-10-27 12:35 ` Jerry Van Baren
0 siblings, 0 replies; 2+ messages in thread
From: Jerry Van Baren @ 2009-10-27 12:35 UTC (permalink / raw)
To: u-boot
J.H.Kim wrote:
> Hi, everyone
>
> I'm using AT91SAM9260 board.
> I'm now loading the kernel with serial cable.
> But it is too slow.
> So, I'm going to use tftp.
> When ftpbootm, u-boot told me to specify ethernet address.
> How I can find ethernet mac address?
>
> Thanks in advance.
>
> Best Regards,
>
> J.Hwan Kim
<http://www.denx.de/wiki/view/DULG/WhereCanIGetAValidMACAddress>
Best regards,
gvb
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2009-10-27 12:35 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-10-27 12:04 [U-Boot] MAC address setting J.H.Kim
2009-10-27 12:35 ` Jerry Van Baren
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox