From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tom Date: Tue, 27 Oct 2009 09:07:43 -0500 Subject: [U-Boot] [PATCH 6/8] OMAP3 beagle Add usbtty configuration In-Reply-To: <19F8576C6E063C45BE387C64729E73940436E5F625@dbde02.ent.ti.com> References: <19F8576C6E063C45BE387C64729E73940436E5F620@dbde02.ent.ti.com> <19F8576C6E063C45BE387C64729E73940436E5F625@dbde02.ent.ti.com> Message-ID: <4AE6FEAF.5040501@windriver.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Gupta, Ajay Kumar wrote: > Tom, >> From: Tom Rix windriver.com> >> Subject: [PATCH 6/8] OMAP3 beagle Add usbtty configuration >> Newsgroups: gmane.comp.boot-loaders.u-boot >> Date: 2009-09-28 16:37:27 GMT (4 weeks, 12 hours and 41 minutes ago) >> >> The primary console of beagle is the serial header. >> >> A secondary console is to use the usbtty. The user can set this >> manually by doing >> >> setenv stdout usbtty; setenv stdin usbtty; setenv stderr usbtty >> saveenv >> >> usbtty will be usable by accessing the /dev/ttyACM0 on a linux host. >> >> Signed-off-by: Tom Rix windriver.com> >> --- >> include/configs/omap3_beagle.h | 16 ++++++++++++++++ >> 1 files changed, 16 insertions(+), 0 deletions(-) >> >> diff --git a/include/configs/omap3_beagle.h >> b/include/configs/omap3_beagle.h >> index 55eeb94..253cdba 100644 >> --- a/include/configs/omap3_beagle.h >> +++ b/include/configs/omap3_beagle.h >> @@ -98,6 +98,21 @@ >> #define CONFIG_OMAP3_MMC 1 >> #define CONFIG_DOS_PARTITION 1 >> >> +/* USB */ >> +#define CONFIG_MUSB_UDC 1 >> +#define CONFIG_USB_OMAP3 1 >> +#define CONFIG_TWL4030_USB 1 >> + >> +/* USB device configuration */ >> +#define CONFIG_USB_DEVICE 1 >> +#define CONFIG_USB_TTY 1 >> +#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 >> +/* Change these to suit your needs */ >> +#define CONFIG_USBD_VENDORID 0x0451 >> +#define CONFIG_USBD_PRODUCTID 0x5678 >> +#define CONFIG_USBD_MANUFACTURER "Texas Instruments" >> +#define CONFIG_USBD_PRODUCT_NAME "Beagle" >> + > > We can either define CONFIG_MUSB_UDC or CONFIG_MUSB_HCD (host support), so I think it's better to move host and device specific definitions within > CONFIG_MUSB_UDC or CONFIG_MUSB_HCD. > > #ifdef CONFIG_USB_OMAP3 > > #ifdef CONFIG_MUSB_HCD > > #endif > > #ifdef CONFIG_MUSB_UDC > > #endif > > #endif /* CONFIG_USB_OMAP3 */ > > This change would make it easier to test Host or device functionalities. > > -Ajay I am not adding host support. Tom