From: Tom <Tom.Rix@windriver.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH-ARM 2/3] Add sc32440 support to the s3c2410 nand driver
Date: Sun, 01 Nov 2009 16:43:19 -0600 [thread overview]
Message-ID: <4AEE0F07.7010202@windriver.com> (raw)
In-Reply-To: <4AEDDB9F.5040707@fearnside-systems.co.uk>
kevin.morfitt at fearnside-systems.co.uk wrote:
> This patch adds support for the s3c2440 cpu to the nand driver. It does
> this by replacing the existing driver with that from linux 2.6.31.5,
> modified to make it work in the u-boot mtd nand architecture. Note that
> the linux s3c2410 nand driver supports s3c2410 and s3c2440, though I haven't
> been able to test this on an s3c2410 board, only an s3c2440 board.
>
> Tested on an Embest SBC2440-II Board with local u-boot patches as I don't have
> any s3c2400 or s3c2410 boards but need this patch applying before I can submit
> patches for the SBC2440-II Board. Also, ran MAKEALL for all ARM9 targets and no
> new warnings or errors were found.
>
My opinion is that this change should be slit into the
driver update and s3c2440 changes.
Tom
prev parent reply other threads:[~2009-11-01 22:43 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-11-01 19:03 [U-Boot] [PATCH-ARM 2/3] Add sc32440 support to the s3c2410 nand driver kevin.morfitt at fearnside-systems.co.uk
2009-11-01 22:43 ` Tom [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4AEE0F07.7010202@windriver.com \
--to=tom.rix@windriver.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox