From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ben Warren Date: Mon, 09 Nov 2009 10:16:06 -0800 Subject: [U-Boot] MPC8360ERDK and DP83848 In-Reply-To: References: Message-ID: <4AF85C66.5000909@gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hello Jon, Jon.Gadsden at invensysrail.com wrote: > The MPC8360ERDK from Freescale has both Broadcom 5481 and National DP83848 > ethernet interfaces. However the U-Boot supplied with the RDK only > supports the Broadcom 5481. Has anybody got the National DP83848 > interface working for U-Boot on this RDK? In the U-Boot archives I can > only find references to the DP83848 driver for the A91RM9200 board. > > The UEC driver has support for a generic PHY. It might 'just work'. > Thanks, Jon > > -- > Jon Gadsden > Embedded Software Engineer, > Vital Platforms Centre of Excellence > Invensys Rail (UK), Chippenham > Telephone: +44 (0) 1249 441407 > email: Jon.Gadsden at invensysrail.com > > > Any files attached to this e-mail will have been checked with virus > detection software prior to transmission but you should carry out your own > virus check before opening any attachment. Invensys Rail does not accept > liability for any damage or loss which may be caused by software viruses. > This e-mail and any associated files are intended solely for the > individual or entity to whom they are addressed. Please do not copy it or > use it for any purposes, or disclose its contents to any other person. > Further, this e-mail and any associated files may be confidential and > further may be legally privileged. > > This email is from the Invensys Rail Limited business unit of Invensys plc > which is a company registered in England and Wales with its registered > office at Portland House, Bressenden Place, London, SW1E 5BF (Registered > number 166023). For a list of European legal entities within Invensys Rail > business group, please click here > > If you have received this e-mail in error, you are on notice of its > status. Please notify us immediately by reply e-mail and then delete this > message from your system. Thank you for your co-operation. You may contact > our Helpdesk on +44 (0)20 7821 3859 / 2105 or email > inet.hqhelpdesk at invensys.com > > This e-mail and any attachments thereto may be subject to the terms of any > agreements between Invensys (and/or its subsidiaries and affiliates) and > the recipient (and/or its subsidiaries and affiliates). > > If you can strip this crap from your messages you'll make more friends regards, Ben