From mboxrd@z Thu Jan  1 00:00:00 1970
From: Tom <Tom.Rix@windriver.com>
Date: Wed, 11 Nov 2009 08:24:13 -0600
Subject: [U-Boot] [PATCH] omap3: add CM-T35 board
In-Reply-To: <1257949086.30532.13.camel@ptyser-laptop>
References: <1257926592-14782-4-git-send-email-mike@compulab.co.il>	<0554BEF07D437848AF01B9C9B5F0BC5D93EBF482@dlee01.ent.ti.com>	<4AFABEF0.4040404@compulab.co.il>	<1257947893.30532.8.camel@ptyser-laptop>	<4AFAC505.5000003@compulab.co.il>
	<1257949086.30532.13.camel@ptyser-laptop>
Message-ID: <4AFAC90D.2020902@windriver.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Peter Tyser wrote:
> <snip>
> 
>>>>>> --- a/Makefile
>>>>>> +++ b/Makefile
>>>>>> @@ -3168,6 +3168,9 @@ omap3_zoom1_config :    unconfig
>>>>>>  omap3_zoom2_config : unconfig
>>>>>>       @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom2 logicpd omap3
>>>>>>
>>>>>> +omap3_cm-t35_config :        unconfig
>>>>>> +     @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 cm-t35 NULL omap3
>>>>>> +
>>> I'd title your _config rule the same as your board name, ie drop the
>>> omap3_ prefix above.  And the above list should be alphabetically
>>> sorted.
>> I'd prefer to keep the 'omap3_' prefix to stay inline with other omap3 boards.
> 
> Just because the other omap3_ board are wrong doesn't mean your board
> should be too:)  This same question was discussed for the devkit8000:
> http://www.mail-archive.com/u-boot at lists.denx.de/msg21317.html
> 

Please drop the omap3_ prefix.
New boards are following the standard convention.

Tom