* [U-Boot] [PATCH] omap3: add CM-T35 board
@ 2009-11-11 8:03 Mike Rapoport
2009-11-11 13:01 ` Paulraj, Sandeep
0 siblings, 1 reply; 13+ messages in thread
From: Mike Rapoport @ 2009-11-11 8:03 UTC (permalink / raw)
To: u-boot
Add CM-T35 board support
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
---
Makefile | 3 +
board/cm-t35/Makefile | 47 ++++++
board/cm-t35/cm-t35.c | 196 ++++++++++++++++++++++++++
board/cm-t35/cm-t35.h | 173 +++++++++++++++++++++++
board/cm-t35/config.mk | 30 ++++
include/configs/omap3_cm-t35.h | 301 ++++++++++++++++++++++++++++++++++++++++
6 files changed, 750 insertions(+), 0 deletions(-)
create mode 100644 board/cm-t35/Makefile
create mode 100644 board/cm-t35/cm-t35.c
create mode 100644 board/cm-t35/cm-t35.h
create mode 100644 board/cm-t35/config.mk
create mode 100755 include/configs/omap3_cm-t35.h
diff --git a/Makefile b/Makefile
index bcb3fe9..8771c90 100644
--- a/Makefile
+++ b/Makefile
@@ -3168,6 +3168,9 @@ omap3_zoom1_config : unconfig
omap3_zoom2_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom2 logicpd omap3
+omap3_cm-t35_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 cm-t35 NULL omap3
+
smdkc100_config: unconfig
@$(MKCONFIG) $(@:_config=) arm arm_cortexa8 smdkc100 samsung s5pc1xx
diff --git a/board/cm-t35/Makefile b/board/cm-t35/Makefile
new file mode 100644
index 0000000..7b80aaa
--- /dev/null
+++ b/board/cm-t35/Makefile
@@ -0,0 +1,47 @@
+#
+# (C) Copyright 2000, 2001, 2002
+# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS := cm-t35.o
+
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+ rm -f $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
diff --git a/board/cm-t35/cm-t35.c b/board/cm-t35/cm-t35.c
new file mode 100644
index 0000000..8f0be65
--- /dev/null
+++ b/board/cm-t35/cm-t35.c
@@ -0,0 +1,196 @@
+/*
+ * (C) Copyright 2009
+ * CompuLab, Ltd. <www.compulab.co.il>
+ *
+ * Authors :
+ * Igor Vaisbein <igor@compulab.co.il>
+ * Mike Rapoport <mike@compulab.co.il>
+ *
+ * Derived from omap3evm and Beagle Board by
+ * Manikandan Pillai <mani.pillai@ti.com>
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Syed Mohammed Khasim <x0khasim@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <netdev.h>
+#include <net.h>
+#include <i2c.h>
+#include <twl4030.h>
+
+#include <asm/io.h>
+#include <asm/arch/mem.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/mach-types.h>
+
+#include "cm-t35.h"
+
+#define CM_T35_SMC911X_BASE 0x2C000000
+#define SB_T35_SMC911X_BASE (CM_T35_SMC911X_BASE + SZ_16M)
+
+static u32 gpmc_net_config[GPMC_MAX_REG] = {
+ NET_GPMC_CONFIG1,
+ NET_GPMC_CONFIG2,
+ NET_GPMC_CONFIG3,
+ NET_GPMC_CONFIG4,
+ NET_GPMC_CONFIG5,
+ NET_GPMC_CONFIG6,
+ 0
+};
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Routine: setup_net_chip
+ * Description: Setting up the configuration GPMC registers specific to the
+ * Ethernet hardware.
+ */
+static void setup_net_chip(void)
+{
+ struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE;
+
+ enable_gpmc_cs_config(gpmc_net_config, &gpmc_cfg->cs[5],
+ CM_T35_SMC911X_BASE, GPMC_SIZE_16M);
+ enable_gpmc_cs_config(gpmc_net_config, &gpmc_cfg->cs[4],
+ SB_T35_SMC911X_BASE, GPMC_SIZE_16M);
+
+ /* Enable off mode for NWE in PADCONF_GPMC_NWE register */
+ writew(readw(&ctrl_base->gpmc_nwe) | 0x0E00, &ctrl_base->gpmc_nwe);
+
+ /* Enable off mode for NOE in PADCONF_GPMC_NADV_ALE register */
+ writew(readw(&ctrl_base->gpmc_noe) | 0x0E00, &ctrl_base->gpmc_noe);
+
+ /* Enable off mode for ALE in PADCONF_GPMC_NADV_ALE register */
+ writew(readw(&ctrl_base->gpmc_nadv_ale) | 0x0E00,
+ &ctrl_base->gpmc_nadv_ale);
+
+ /* Reset the ethernet controller via TPS65930 GPIO */
+ /* Set GPIO1 of TPS65930 as output */
+ twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, 0x02,
+ TWL4030_BASEADD_GPIO+0x03);
+ /* Send a pulse on the GPIO pin */
+ twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, 0x02,
+ TWL4030_BASEADD_GPIO+0x0C);
+ udelay(1);
+ twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, 0x02,
+ TWL4030_BASEADD_GPIO+0x09);
+ udelay(1);
+ twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, 0x02,
+ TWL4030_BASEADD_GPIO+0x0C);
+
+}
+
+/*
+ * Routine: board_init
+ * Description: Early hardware init.
+ */
+int board_init(void)
+{
+ gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
+
+ /* board id for Linux */
+ gd->bd->bi_arch_number = MACH_TYPE_CM_T35;
+ /* boot param addr */
+ gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
+
+ return 0;
+}
+
+/*
+ * Routine: misc_init_r
+ * Description: Init ethernet (done here so udelay works)
+ */
+int misc_init_r(void)
+{
+
+#ifdef CONFIG_DRIVER_OMAP34XX_I2C
+ i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+#endif
+
+#if defined(CONFIG_CMD_NET)
+ setup_net_chip();
+#endif
+
+ dieid_num_r();
+
+ return 0;
+}
+
+/*
+ * Routine: set_muxconf_regs
+ * Description: Setting up the configuration Mux registers specific to the
+ * hardware. Many pins need to be moved from protect to primary
+ * mode.
+ */
+void set_muxconf_regs(void)
+{
+ MUX_CM_T35();
+}
+
+/*
+ * Routine: handle_mac_address
+ * Description: prepare MAC address for on-board Ethernet.
+ */
+static int handle_mac_address(void)
+{
+ unsigned char enetaddr[6];
+ int rc;
+
+ rc = eth_getenv_enetaddr("ethaddr", enetaddr);
+ if (rc)
+ return 0;
+
+ rc = i2c_read(0x50, 0, 1, enetaddr, 6);
+ if (rc)
+ return rc;
+
+ if (!is_valid_ether_addr(enetaddr))
+ return -1;
+
+ return eth_setenv_enetaddr("ethaddr", enetaddr);
+}
+
+/*
+ * Routine: board_eth_init
+ * Description: initialize module and base-board Ethernet chips
+ */
+int board_eth_init(bd_t *bis)
+{
+ int err1 = 0, err2 = 0;
+
+#ifdef CONFIG_SMC911X
+ err1 = handle_mac_address();
+ err2 = smc911x_initialize(0, CM_T35_SMC911X_BASE);
+
+ if (err1 && !err2)
+ printf("CM-T35: No MAC address found\n");
+
+ err1 = smc911x_initialize(1, SB_T35_SMC911X_BASE);
+
+ /* run eth_init to set up MAC address prior to OS boot */
+ if (!err1 || !err2)
+ err1 = eth_init(bis);
+ else
+ err1 = -1;
+#endif
+ return err1;
+}
diff --git a/board/cm-t35/cm-t35.h b/board/cm-t35/cm-t35.h
new file mode 100644
index 0000000..d44d89e
--- /dev/null
+++ b/board/cm-t35/cm-t35.h
@@ -0,0 +1,173 @@
+/*
+ * (C) Copyright 2009 CompuLab, Ltd
+ * Authors:
+ * Igor Vaisbein <igor@compulab.co.il>
+ * Mike Rapoport <mike@compulab.co.il>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef _CM_T35_H_
+#define _CM_T35_H_
+
+const omap3_sysinfo sysinfo = {
+ DDR_DISCRETE,
+ "CM-T35 board",
+ "NAND",
+};
+
+/* static void setup_net_chip(void); */
+
+/*
+ * IEN - Input Enable
+ * IDIS - Input Disable
+ * PTD - Pull type Down
+ * PTU - Pull type Up
+ * DIS - Pull type selection is inactive
+ * EN - Pull type selection is active
+ * M0 - Mode 0
+ * The commented string gives the final mux configuration for that pin
+ */
+#define MUX_CM_T35() \
+ /*SDRC*/\
+ MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)) /*SDRC_D0*/\
+ MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0)) /*SDRC_D1*/\
+ MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0)) /*SDRC_D2*/\
+ MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0)) /*SDRC_D3*/\
+ MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0)) /*SDRC_D4*/\
+ MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0)) /*SDRC_D5*/\
+ MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0)) /*SDRC_D6*/\
+ MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0)) /*SDRC_D7*/\
+ MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0)) /*SDRC_D8*/\
+ MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0)) /*SDRC_D9*/\
+ MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0)) /*SDRC_D10*/\
+ MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0)) /*SDRC_D11*/\
+ MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0)) /*SDRC_D12*/\
+ MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0)) /*SDRC_D13*/\
+ MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0)) /*SDRC_D14*/\
+ MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0)) /*SDRC_D15*/\
+ MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0)) /*SDRC_D16*/\
+ MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0)) /*SDRC_D17*/\
+ MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0)) /*SDRC_D18*/\
+ MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0)) /*SDRC_D19*/\
+ MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0)) /*SDRC_D20*/\
+ MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0)) /*SDRC_D21*/\
+ MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0)) /*SDRC_D22*/\
+ MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0)) /*SDRC_D23*/\
+ MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0)) /*SDRC_D24*/\
+ MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0)) /*SDRC_D25*/\
+ MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0)) /*SDRC_D26*/\
+ MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0)) /*SDRC_D27*/\
+ MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0)) /*SDRC_D28*/\
+ MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0)) /*SDRC_D29*/\
+ MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0)) /*SDRC_D30*/\
+ MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0)) /*SDRC_D31*/\
+ MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0)) /*SDRC_CLK*/\
+ MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0)) /*SDRC_DQS0*/\
+ MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0)) /*SDRC_DQS1*/\
+ MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0)) /*SDRC_DQS2*/\
+ MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0)) /*SDRC_DQS3*/\
+ /*GPMC*/\
+ MUX_VAL(CP(GPMC_A1), (IDIS | PTU | EN | M0)) /*GPMC_A1*/\
+ MUX_VAL(CP(GPMC_A2), (IDIS | PTU | EN | M0)) /*GPMC_A2*/\
+ MUX_VAL(CP(GPMC_A3), (IDIS | PTU | EN | M0)) /*GPMC_A3*/\
+ MUX_VAL(CP(GPMC_A4), (IDIS | PTU | EN | M0)) /*GPMC_A4*/\
+ MUX_VAL(CP(GPMC_A5), (IDIS | PTU | EN | M0)) /*GPMC_A5*/\
+ MUX_VAL(CP(GPMC_A6), (IDIS | PTU | EN | M0)) /*GPMC_A6*/\
+ MUX_VAL(CP(GPMC_A7), (IDIS | PTU | EN | M0)) /*GPMC_A7*/\
+ MUX_VAL(CP(GPMC_A8), (IDIS | PTU | EN | M0)) /*GPMC_A8*/\
+ MUX_VAL(CP(GPMC_A9), (IDIS | PTU | EN | M0)) /*GPMC_A9*/\
+ MUX_VAL(CP(GPMC_A10), (IDIS | PTU | EN | M0)) /*GPMC_A10*/\
+ MUX_VAL(CP(GPMC_D0), (IEN | PTU | EN | M0)) /*GPMC_D0*/\
+ MUX_VAL(CP(GPMC_D1), (IEN | PTU | EN | M0)) /*GPMC_D1*/\
+ MUX_VAL(CP(GPMC_D2), (IEN | PTU | EN | M0)) /*GPMC_D2*/\
+ MUX_VAL(CP(GPMC_D3), (IEN | PTU | EN | M0)) /*GPMC_D3*/\
+ MUX_VAL(CP(GPMC_D4), (IEN | PTU | EN | M0)) /*GPMC_D4*/\
+ MUX_VAL(CP(GPMC_D5), (IEN | PTU | EN | M0)) /*GPMC_D5*/\
+ MUX_VAL(CP(GPMC_D6), (IEN | PTU | EN | M0)) /*GPMC_D6*/\
+ MUX_VAL(CP(GPMC_D7), (IEN | PTU | EN | M0)) /*GPMC_D7*/\
+ MUX_VAL(CP(GPMC_D8), (IEN | PTU | EN | M0)) /*GPMC_D8*/\
+ MUX_VAL(CP(GPMC_D9), (IEN | PTU | EN | M0)) /*GPMC_D9*/\
+ MUX_VAL(CP(GPMC_D10), (IEN | PTU | EN | M0)) /*GPMC_D10*/\
+ MUX_VAL(CP(GPMC_D11), (IEN | PTU | EN | M0)) /*GPMC_D11*/\
+ MUX_VAL(CP(GPMC_D12), (IEN | PTU | EN | M0)) /*GPMC_D12*/\
+ MUX_VAL(CP(GPMC_D13), (IEN | PTU | EN | M0)) /*GPMC_D13*/\
+ MUX_VAL(CP(GPMC_D14), (IEN | PTU | EN | M0)) /*GPMC_D14*/\
+ MUX_VAL(CP(GPMC_D15), (IEN | PTU | EN | M0)) /*GPMC_D15*/\
+ MUX_VAL(CP(GPMC_NCS0), (IDIS | PTU | EN | M0)) /*GPMC_nCS0*/\
+/* SB-T35 Ethernet */\
+ MUX_VAL(CP(GPMC_NCS4), (IEN | PTU | EN | M0)) /*GPMC_nCS4*/\
+/* CM-T35 Ethernet */\
+ MUX_VAL(CP(GPMC_NCS5), (IDIS | PTU | DIS | M0)) /*GPMC_nCS5*/\
+ MUX_VAL(CP(GPMC_CLK), (IEN | PTD | DIS | M4)) /*GPIO_59*/\
+ MUX_VAL(CP(GPMC_NADV_ALE), (IDIS | PTD | DIS | M0)) /*GPMC_nADV_ALE*/\
+ MUX_VAL(CP(GPMC_NOE), (IDIS | PTD | DIS | M0)) /*GPMC_nOE*/\
+ MUX_VAL(CP(GPMC_NWE), (IDIS | PTD | DIS | M0)) /*GPMC_nWE*/\
+ MUX_VAL(CP(GPMC_NBE0_CLE), (IDIS | PTU | EN | M0)) /*GPMC_nBE0_CLE*/\
+ MUX_VAL(CP(GPMC_NBE1), (IDIS | PTD | DIS | M4)) /*GPIO_61*/\
+ MUX_VAL(CP(GPMC_NWP), (IEN | PTD | DIS | M0)) /*GPMC_nWP*/\
+ MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0)) /*GPMC_WAIT0*/\
+ /*DSS*/\
+ MUX_VAL(CP(DSS_PCLK), (IDIS | PTD | DIS | M0)) /*DSS_PCLK*/\
+ MUX_VAL(CP(DSS_HSYNC), (IDIS | PTD | DIS | M0)) /*DSS_HSYNC*/\
+ MUX_VAL(CP(DSS_VSYNC), (IDIS | PTD | DIS | M0)) /*DSS_VSYNC*/\
+ MUX_VAL(CP(DSS_ACBIAS), (IDIS | PTD | DIS | M0)) /*DSS_ACBIAS*/\
+ MUX_VAL(CP(DSS_DATA0), (IDIS | PTD | DIS | M0)) /*DSS_DATA0*/\
+ MUX_VAL(CP(DSS_DATA1), (IDIS | PTD | DIS | M0)) /*DSS_DATA1*/\
+ MUX_VAL(CP(DSS_DATA2), (IDIS | PTD | DIS | M0)) /*DSS_DATA2*/\
+ MUX_VAL(CP(DSS_DATA3), (IDIS | PTD | DIS | M0)) /*DSS_DATA3*/\
+ MUX_VAL(CP(DSS_DATA4), (IDIS | PTD | DIS | M0)) /*DSS_DATA4*/\
+ MUX_VAL(CP(DSS_DATA5), (IDIS | PTD | DIS | M0)) /*DSS_DATA5*/\
+ MUX_VAL(CP(DSS_DATA6), (IDIS | PTD | DIS | M0)) /*DSS_DATA6*/\
+ MUX_VAL(CP(DSS_DATA7), (IDIS | PTD | DIS | M0)) /*DSS_DATA7*/\
+ MUX_VAL(CP(DSS_DATA8), (IDIS | PTD | DIS | M0)) /*DSS_DATA8*/\
+ MUX_VAL(CP(DSS_DATA9), (IDIS | PTD | DIS | M0)) /*DSS_DATA9*/\
+ MUX_VAL(CP(DSS_DATA10), (IDIS | PTD | DIS | M0)) /*DSS_DATA10*/\
+ MUX_VAL(CP(DSS_DATA11), (IDIS | PTD | DIS | M0)) /*DSS_DATA11*/\
+ MUX_VAL(CP(DSS_DATA12), (IDIS | PTD | DIS | M0)) /*DSS_DATA12*/\
+ MUX_VAL(CP(DSS_DATA13), (IDIS | PTD | DIS | M0)) /*DSS_DATA13*/\
+ MUX_VAL(CP(DSS_DATA14), (IDIS | PTD | DIS | M0)) /*DSS_DATA14*/\
+ MUX_VAL(CP(DSS_DATA15), (IDIS | PTD | DIS | M0)) /*DSS_DATA15*/\
+ MUX_VAL(CP(DSS_DATA16), (IDIS | PTD | DIS | M0)) /*DSS_DATA16*/\
+ MUX_VAL(CP(DSS_DATA17), (IDIS | PTD | DIS | M0)) /*DSS_DATA17*/\
+ MUX_VAL(CP(DSS_DATA18), (IDIS | PTD | DIS | M0)) /*DSS_DATA18*/\
+ MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M0)) /*DSS_DATA19*/\
+ MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M0)) /*DSS_DATA20*/\
+ MUX_VAL(CP(DSS_DATA21), (IDIS | PTD | DIS | M0)) /*DSS_DATA21*/\
+ MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M0)) /*DSS_DATA22*/\
+ MUX_VAL(CP(DSS_DATA23), (IDIS | PTD | DIS | M0)) /*DSS_DATA23*/\
+ /*Serial Interface*/\
+ MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTD | DIS | M0)) /*UART3_RX_IRRX*/\
+ MUX_VAL(CP(UART3_TX_IRTX), (IDIS | PTD | DIS | M0)) /*UART3_TX_IRTX*/\
+ MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0)) /*I2C1_SCL*/\
+ MUX_VAL(CP(I2C1_SDA), (IEN | PTU | EN | M0)) /*I2C1_SDA*/\
+ /*Control and debug */\
+ MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0)) /*SYS_32K*/\
+ MUX_VAL(CP(SYS_CLKREQ), (IEN | PTD | DIS | M0)) /*SYS_CLKREQ*/\
+ MUX_VAL(CP(SYS_NIRQ), (IEN | PTU | EN | M0)) /*SYS_nIRQ*/\
+ MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0)) /*SYS_OFF_MODE*/\
+ MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M0)) /*SYS_CLKOUT1*/\
+ MUX_VAL(CP(SYS_CLKOUT2), (IDIS | PTD | DIS | M4)) /*green LED*/\
+ MUX_VAL(CP(JTAG_nTRST), (IEN | PTD | DIS | M0)) /*JTAG_nTRST*/\
+ MUX_VAL(CP(JTAG_TCK), (IEN | PTD | DIS | M0)) /*JTAG_TCK*/\
+ MUX_VAL(CP(JTAG_TMS), (IEN | PTD | DIS | M0)) /*JTAG_TMS*/\
+ MUX_VAL(CP(JTAG_TDI), (IEN | PTD | DIS | M0)) /*JTAG_TDI*/\
+ MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0)) /*sdrc_cke0*/\
+ MUX_VAL(CP(SDRC_CKE1), (IDIS | PTD | DIS | M7)) /*sdrc_cke1*/\
+
+#endif
diff --git a/board/cm-t35/config.mk b/board/cm-t35/config.mk
new file mode 100644
index 0000000..6d1a511
--- /dev/null
+++ b/board/cm-t35/config.mk
@@ -0,0 +1,30 @@
+#
+# (C) Copyright 2009
+# CompuLab, Ltd., <www.compulab.co.il>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+# Physical Address:
+# 8000'0000 (bank0)
+#
+# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
+# (mem base + reserved)
+
+# For use with external or internal boots.
+TEXT_BASE = 0x80e80000
\ No newline at end of file
diff --git a/include/configs/omap3_cm-t35.h b/include/configs/omap3_cm-t35.h
new file mode 100755
index 0000000..0fbb62f
--- /dev/null
+++ b/include/configs/omap3_cm-t35.h
@@ -0,0 +1,301 @@
+/*
+ * (C) Copyright 2009 CompuLab, Ltd.
+ *
+ * Authors :
+ * Igor Vaisbein <igor@compulab.co.il>
+ * Mike Rapoport <mike@compulab.co.il>
+ *
+ * Derived from omap3evm and Beagle Board by
+ * Manikandan Pillai <mani.pillai@ti.com>
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Syed Mohammed Khasim <x0khasim@ti.com>
+ *
+ * Configuration settings for the CompuLab CM-T35 board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+#include <asm/sizes.h>
+
+/* High Level Configuration Options */
+#define CONFIG_ARMCORTEXA8 1 /* This is an ARM V7 CPU core */
+#define CONFIG_OMAP 1 /* in a TI OMAP core */
+#define CONFIG_OMAP34XX 1 /* which is a 34XX */
+#define CONFIG_OMAP3430 1 /* which is in a 3430 */
+#define CONFIG_CM_T35 1 /* working with CM_T35 */
+
+#include <asm/arch/cpu.h> /* get chip and board defs */
+#include <asm/arch/omap3.h>
+
+#define CONFIG_DISPLAY_CPUINFO 1
+#define CONFIG_DISPLAY_BOARDINFO 1
+
+/* Clock Defines */
+#define V_OSCK 26000000 /* Clock output from T2 */
+#define V_SCLK (V_OSCK >> 1)
+
+#undef CONFIG_USE_IRQ /* no support for IRQs */
+#define CONFIG_MISC_INIT_R
+
+#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS 1
+#define CONFIG_INITRD_TAG 1
+#define CONFIG_REVISION_TAG 1
+
+/* Size of malloc() pool */
+#define CONFIG_ENV_SIZE SZ_128K /* Total Size Environment */
+ /* Sector */
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_512K)
+#define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for */
+ /* initial data */
+/* NS16550 Configuration */
+#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */
+
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE (-4)
+#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
+
+/* serial console configuration */
+#define CONFIG_CONS_INDEX 3
+#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3
+#define CONFIG_SERIAL3 3 /* UART3 */
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
+ 115200}
+#define CONFIG_MMC 1
+#define CONFIG_OMAP3_MMC 1
+#define CONFIG_DOS_PARTITION 1
+
+/* commands to include */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_EXT2 /* EXT2 Support */
+#define CONFIG_CMD_FAT /* FAT support */
+#define CONFIG_CMD_JFFS2 /* JFFS2 Support */
+#define CONFIG_CMD_YAFFS2 /* YAFFS2 Support */
+#define CONFIG_CMD_UBI /* UBI Support */
+#define CONFIG_CMD_MTDPARTS
+
+#define CONFIG_CMD_I2C /* I2C serial bus support */
+#define CONFIG_CMD_MMC /* MMC support */
+#define CONFIG_CMD_NAND /* NAND support */
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PING
+
+#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */
+#undef CONFIG_CMD_FPGA /* FPGA configuration Support */
+#undef CONFIG_CMD_IMLS /* List all found images */
+
+#define CONFIG_SYS_NO_FLASH
+
+/* I2C */
+#define CONFIG_SYS_I2C_SPEED 100000
+#define CONFIG_SYS_I2C_SLAVE 1
+#define CONFIG_SYS_I2C_BUS 0
+#define CONFIG_SYS_I2C_BUS_SELECT 1
+#define CONFIG_DRIVER_OMAP34XX_I2C 1
+
+/* TWL4030 */
+#define CONFIG_TWL4030_POWER 1
+
+/* Board NAND Info. */
+#define CONFIG_NAND_OMAP_GPMC 1
+#define GPMC_NAND_ECC_LP_x8_LAYOUT 1
+#define OMAP34XX_GPMC_NAND_SMNAND 1
+
+#define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */
+ /* to access nand */
+#define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */
+ /* to access */
+ /* nand at CS0 */
+
+#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of */
+ /* NAND devices */
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
+
+/* JFFS2 */
+#define CONFIG_JFFS2_NAND
+#define CONFIG_JFFS2_DEV "nand0"
+#define CONFIG_SYS_MAX_MTD_BANKS (CONFIG_SYS_MAX_FLASH_BANKS + \
+ CONFIG_SYS_MAX_NAND_DEVICE)
+#define CONFIG_SYS_JFFS2_MEM_NAND
+#define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS
+#define CONFIG_SYS_JFFS2_NUM_BANKS 1
+
+/* ubi/ubifs related definitions */
+#define CONFIG_RBTREE
+#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
+#define CONFIG_MTD_PARTITIONS
+
+/* Environment information */
+#define CONFIG_BOOTDELAY 3
+
+#define CONFIG_BOOTFILE uImage
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "loadaddr=0x82000000\0" \
+ "baudrate=115200\0"\
+ "console=ttyS2,115200n8\0" \
+ "autoload=no\0" \
+ "mmcargs=setenv bootargs console=${console} " \
+ "root=/dev/mmcblk0p2 rw " \
+ "rootfstype=ext3 rootwait\0" \
+ "nandargs=setenv bootargs console=${console} " \
+ "root=/dev/mtdblock4 rw " \
+ "rootfstype=jffs2\0" \
+ "loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \
+ "bootscript=echo Running bootscript from mmc ...; " \
+ "source ${loadaddr}\0" \
+ "loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \
+ "mmcboot=echo Booting from mmc ...; " \
+ "run mmcargs; " \
+ "bootm ${loadaddr}\0" \
+ "nandboot=echo Booting from nand ...; " \
+ "run nandargs; " \
+ "onenand read ${loadaddr} 280000 400000; " \
+ "bootm ${loadaddr}\0" \
+
+#define CONFIG_BOOTCOMMAND \
+ "if mmc init; then " \
+ "if run loadbootscript; then " \
+ "run bootscript; " \
+ "else " \
+ "if run loaduimage; then " \
+ "run mmcboot; " \
+ "else run nandboot; " \
+ "fi; " \
+ "fi; " \
+ "else run nandboot; fi"
+
+#define MTDIDS_DEFAULT "nand0=nand"
+#define MTDPARTS_DEFAULT "mtdparts=nand:512k(xloader)," \
+ "1920k(u-boot)," \
+ "256k(env)," \
+ "4m(kernel)," \
+ "-(fs),"
+
+#define CONFIG_AUTO_COMPLETE 1
+/*
+ * Miscellaneous configurable options
+ */
+#define V_PROMPT "CM-T35 # "
+
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+#define CONFIG_SYS_PROMPT V_PROMPT
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS 16 /* max number of command */
+ /* args */
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
+
+/* memtest works on */
+#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0 + 0x01000000)
+#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + 0x08000000)
+
+#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default load */
+ /* address */
+
+/*
+ * OMAP3 has 12 GP timers, they can be driven by the system clock
+ * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
+ * This rate is divided by a local divisor.
+ */
+#define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2
+#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
+#define CONFIG_SYS_HZ 1000
+
+/*
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE SZ_128K /* regular stack */
+#ifdef CONFIG_USE_IRQ
+#define CONFIG_STACKSIZE_IRQ SZ_4K /* IRQ stack */
+#define CONFIG_STACKSIZE_FIQ SZ_4K /* FIQ stack */
+#endif
+
+/* Physical Memory Map */
+#define CONFIG_NR_DRAM_BANKS 1 /* CS1 may not be populated on CM-T35 */
+#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0
+#define PHYS_SDRAM_1_SIZE SZ_32M /* at least 32 meg */
+
+/* SDRAM Bank Allocation method */
+#define SDRC_R_B_C 1
+
+/* PISMO support */
+#define PISMO1_NAND_SIZE GPMC_SIZE_128M
+#define PISMO1_ONEN_SIZE GPMC_SIZE_128M
+
+#define CONFIG_SYS_MAX_FLASH_SECT 520 /* max number of sectors */
+ /* on one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */
+#define CONFIG_SYS_MONITOR_LEN SZ_256K /* Reserve 2 sectors */
+
+#define CONFIG_SYS_FLASH_BASE boot_flash_base
+
+/* Monitor at start of flash */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
+
+#define CONFIG_ENV_IS_IN_NAND 1
+
+/* environment */
+#define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */
+
+#define CONFIG_SYS_ENV_SECT_SIZE boot_flash_sec
+#define CONFIG_ENV_OFFSET boot_flash_off
+#define CONFIG_ENV_ADDR boot_flash_env_addr
+
+#ifndef __ASSEMBLY__
+extern struct gpmc *gpmc_cfg;
+extern unsigned int boot_flash_base;
+extern volatile unsigned int boot_flash_env_addr;
+extern unsigned int boot_flash_off;
+extern unsigned int boot_flash_sec;
+extern unsigned int boot_flash_type;
+#endif
+
+/* SMSC9220 Ethernet */
+#if defined(CONFIG_CMD_NET)
+#define CONFIG_NET_MULTI
+#define CONFIG_SMC911X
+#define CONFIG_SMC911X_32_BIT
+#endif /* (CONFIG_CMD_NET) */
+
+/* BOOTP fields */
+#define CONFIG_BOOTP_SUBNETMASK 0x00000001
+#define CONFIG_BOOTP_GATEWAY 0x00000002
+#define CONFIG_BOOTP_HOSTNAME 0x00000004
+#define CONFIG_BOOTP_BOOTPATH 0x00000010
+
+#define CONFIG_OMAP3_GPIO_6 1
+
+#endif /* __CONFIG_H */
--
1.6.0.6
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [U-Boot] [PATCH] omap3: add CM-T35 board
2009-11-11 8:03 [U-Boot] [PATCH] omap3: add CM-T35 board Mike Rapoport
@ 2009-11-11 13:01 ` Paulraj, Sandeep
2009-11-11 13:41 ` Mike Rapoport
0 siblings, 1 reply; 13+ messages in thread
From: Paulraj, Sandeep @ 2009-11-11 13:01 UTC (permalink / raw)
To: u-boot
> -----Original Message-----
> From: u-boot-bounces at lists.denx.de [mailto:u-boot-bounces at lists.denx.de]
> On Behalf Of Mike Rapoport
> Sent: Wednesday, November 11, 2009 3:03 AM
> To: u-boot at lists.denx.de
> Cc: Mike Rapoport
> Subject: [U-Boot] [PATCH] omap3: add CM-T35 board
>
> Add CM-T35 board support
>
> Signed-off-by: Mike Rapoport <mike@compulab.co.il>
> ---
> Makefile | 3 +
> board/cm-t35/Makefile | 47 ++++++
> board/cm-t35/cm-t35.c | 196 ++++++++++++++++++++++++++
> board/cm-t35/cm-t35.h | 173 +++++++++++++++++++++++
> board/cm-t35/config.mk | 30 ++++
> include/configs/omap3_cm-t35.h | 301
If you look at the way OMAP3 is structured now.
Board specific stuff goes into /board/ti/
It has beagle, sdp, etc
> ++++++++++++++++++++++++++++++++++++++++
> 6 files changed, 750 insertions(+), 0 deletions(-)
> create mode 100644 board/cm-t35/Makefile
> create mode 100644 board/cm-t35/cm-t35.c
> create mode 100644 board/cm-t35/cm-t35.h
> create mode 100644 board/cm-t35/config.mk
> create mode 100755 include/configs/omap3_cm-t35.h
You also need entries to MAKEALL and MAINTAINERS
>
> diff --git a/Makefile b/Makefile
> index bcb3fe9..8771c90 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -3168,6 +3168,9 @@ omap3_zoom1_config : unconfig
> omap3_zoom2_config : unconfig
> @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom2 logicpd omap3
>
> +omap3_cm-t35_config : unconfig
> + @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 cm-t35 NULL omap3
> +
> smdkc100_config: unconfig
> @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 smdkc100 samsung s5pc1xx
>
> diff --git a/board/cm-t35/Makefile b/board/cm-t35/Makefile
> new file mode 100644
> index 0000000..7b80aaa
> --- /dev/null
> +++ b/board/cm-t35/Makefile
> @@ -0,0 +1,47 @@
> +#
> +# (C) Copyright 2000, 2001, 2002
> +# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
> +#
> +# See file CREDITS for list of people who contributed to this
> +# project.
> +#
> +# This program is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU General Public License as
> +# published by the Free Software Foundation; either version 2 of
> +# the License, or (at your option) any later version.
> +#
> +# This program is distributed in the hope that it will be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program; if not, write to the Free Software
> +# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> +# MA 02111-1307 USA
> +#
> +
> +include $(TOPDIR)/config.mk
> +
> +LIB = $(obj)lib$(BOARD).a
> +
> +COBJS := cm-t35.o
> +
> +SRCS := $(COBJS:.o=.c)
> +OBJS := $(addprefix $(obj),$(COBJS))
> +
> +$(LIB): $(obj).depend $(OBJS)
> + $(AR) $(ARFLAGS) $@ $(OBJS)
> +
> +clean:
> + rm -f $(OBJS)
> +
> +distclean: clean
> + rm -f $(LIB) core *.bak $(obj).depend
> +
> +#########################################################################
> +
> +# defines $(obj).depend target
> +include $(SRCTREE)/rules.mk
> +
> +sinclude $(obj).depend
> diff --git a/board/cm-t35/cm-t35.c b/board/cm-t35/cm-t35.c
> new file mode 100644
> index 0000000..8f0be65
> --- /dev/null
> +++ b/board/cm-t35/cm-t35.c
> @@ -0,0 +1,196 @@
> +/*
> + * (C) Copyright 2009
> + * CompuLab, Ltd. <www.compulab.co.il>
> + *
> + * Authors :
> + * Igor Vaisbein <igor@compulab.co.il>
> + * Mike Rapoport <mike@compulab.co.il>
> + *
> + * Derived from omap3evm and Beagle Board by
> + * Manikandan Pillai <mani.pillai@ti.com>
> + * Richard Woodruff <r-woodruff2@ti.com>
> + * Syed Mohammed Khasim <x0khasim@ti.com>
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +#include <common.h>
> +#include <netdev.h>
> +#include <net.h>
> +#include <i2c.h>
> +#include <twl4030.h>
> +
> +#include <asm/io.h>
> +#include <asm/arch/mem.h>
> +#include <asm/arch/mux.h>
> +#include <asm/arch/sys_proto.h>
> +#include <asm/mach-types.h>
> +
> +#include "cm-t35.h"
> +
> +#define CM_T35_SMC911X_BASE 0x2C000000
> +#define SB_T35_SMC911X_BASE (CM_T35_SMC911X_BASE + SZ_16M)
> +
> +static u32 gpmc_net_config[GPMC_MAX_REG] = {
> + NET_GPMC_CONFIG1,
> + NET_GPMC_CONFIG2,
> + NET_GPMC_CONFIG3,
> + NET_GPMC_CONFIG4,
> + NET_GPMC_CONFIG5,
> + NET_GPMC_CONFIG6,
> + 0
> +};
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +/*
> + * Routine: setup_net_chip
> + * Description: Setting up the configuration GPMC registers specific to
> the
> + * Ethernet hardware.
> + */
> +static void setup_net_chip(void)
> +{
> + struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE;
> +
> + enable_gpmc_cs_config(gpmc_net_config, &gpmc_cfg->cs[5],
> + CM_T35_SMC911X_BASE, GPMC_SIZE_16M);
> + enable_gpmc_cs_config(gpmc_net_config, &gpmc_cfg->cs[4],
> + SB_T35_SMC911X_BASE, GPMC_SIZE_16M);
> +
> + /* Enable off mode for NWE in PADCONF_GPMC_NWE register */
> + writew(readw(&ctrl_base->gpmc_nwe) | 0x0E00, &ctrl_base->gpmc_nwe);
> +
> + /* Enable off mode for NOE in PADCONF_GPMC_NADV_ALE register */
> + writew(readw(&ctrl_base->gpmc_noe) | 0x0E00, &ctrl_base->gpmc_noe);
> +
> + /* Enable off mode for ALE in PADCONF_GPMC_NADV_ALE register */
> + writew(readw(&ctrl_base->gpmc_nadv_ale) | 0x0E00,
> + &ctrl_base->gpmc_nadv_ale);
> +
> + /* Reset the ethernet controller via TPS65930 GPIO */
> + /* Set GPIO1 of TPS65930 as output */
> + twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, 0x02,
> + TWL4030_BASEADD_GPIO+0x03);
> + /* Send a pulse on the GPIO pin */
> + twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, 0x02,
> + TWL4030_BASEADD_GPIO+0x0C);
> + udelay(1);
> + twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, 0x02,
> + TWL4030_BASEADD_GPIO+0x09);
> + udelay(1);
> + twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, 0x02,
> + TWL4030_BASEADD_GPIO+0x0C);
> +
> +}
> +
> +/*
> + * Routine: board_init
> + * Description: Early hardware init.
> + */
> +int board_init(void)
> +{
> + gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
> +
> + /* board id for Linux */
> + gd->bd->bi_arch_number = MACH_TYPE_CM_T35;
> + /* boot param addr */
> + gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
> +
> + return 0;
> +}
> +
> +/*
> + * Routine: misc_init_r
> + * Description: Init ethernet (done here so udelay works)
> + */
> +int misc_init_r(void)
> +{
> +
> +#ifdef CONFIG_DRIVER_OMAP34XX_I2C
> + i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
> +#endif
> +
> +#if defined(CONFIG_CMD_NET)
> + setup_net_chip();
> +#endif
> +
> + dieid_num_r();
> +
> + return 0;
> +}
> +
> +/*
> + * Routine: set_muxconf_regs
> + * Description: Setting up the configuration Mux registers specific to
> the
> + * hardware. Many pins need to be moved from protect to primary
> + * mode.
> + */
> +void set_muxconf_regs(void)
> +{
> + MUX_CM_T35();
> +}
> +
> +/*
> + * Routine: handle_mac_address
> + * Description: prepare MAC address for on-board Ethernet.
> + */
> +static int handle_mac_address(void)
> +{
> + unsigned char enetaddr[6];
> + int rc;
> +
> + rc = eth_getenv_enetaddr("ethaddr", enetaddr);
> + if (rc)
> + return 0;
> +
> + rc = i2c_read(0x50, 0, 1, enetaddr, 6);
> + if (rc)
> + return rc;
> +
> + if (!is_valid_ether_addr(enetaddr))
> + return -1;
> +
> + return eth_setenv_enetaddr("ethaddr", enetaddr);
> +}
> +
> +/*
> + * Routine: board_eth_init
> + * Description: initialize module and base-board Ethernet chips
> + */
> +int board_eth_init(bd_t *bis)
> +{
> + int err1 = 0, err2 = 0;
> +
> +#ifdef CONFIG_SMC911X
> + err1 = handle_mac_address();
> + err2 = smc911x_initialize(0, CM_T35_SMC911X_BASE);
> +
> + if (err1 && !err2)
> + printf("CM-T35: No MAC address found\n");
> +
> + err1 = smc911x_initialize(1, SB_T35_SMC911X_BASE);
> +
> + /* run eth_init to set up MAC address prior to OS boot */
> + if (!err1 || !err2)
> + err1 = eth_init(bis);
> + else
> + err1 = -1;
> +#endif
> + return err1;
> +}
> diff --git a/board/cm-t35/cm-t35.h b/board/cm-t35/cm-t35.h
> new file mode 100644
> index 0000000..d44d89e
> --- /dev/null
> +++ b/board/cm-t35/cm-t35.h
> @@ -0,0 +1,173 @@
> +/*
> + * (C) Copyright 2009 CompuLab, Ltd
> + * Authors:
> + * Igor Vaisbein <igor@compulab.co.il>
> + * Mike Rapoport <mike@compulab.co.il>
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +#ifndef _CM_T35_H_
> +#define _CM_T35_H_
> +
> +const omap3_sysinfo sysinfo = {
> + DDR_DISCRETE,
> + "CM-T35 board",
> + "NAND",
> +};
> +
> +/* static void setup_net_chip(void); */
> +
> +/*
> + * IEN - Input Enable
> + * IDIS - Input Disable
> + * PTD - Pull type Down
> + * PTU - Pull type Up
> + * DIS - Pull type selection is inactive
> + * EN - Pull type selection is active
> + * M0 - Mode 0
> + * The commented string gives the final mux configuration for that pin
> + */
> +#define MUX_CM_T35() \
> + /*SDRC*/\
> + MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)) /*SDRC_D0*/\
> + MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0)) /*SDRC_D1*/\
> + MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0)) /*SDRC_D2*/\
> + MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0)) /*SDRC_D3*/\
> + MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0)) /*SDRC_D4*/\
> + MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0)) /*SDRC_D5*/\
> + MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0)) /*SDRC_D6*/\
> + MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0)) /*SDRC_D7*/\
> + MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0)) /*SDRC_D8*/\
> + MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0)) /*SDRC_D9*/\
> + MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0)) /*SDRC_D10*/\
> + MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0)) /*SDRC_D11*/\
> + MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0)) /*SDRC_D12*/\
> + MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0)) /*SDRC_D13*/\
> + MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0)) /*SDRC_D14*/\
> + MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0)) /*SDRC_D15*/\
> + MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0)) /*SDRC_D16*/\
> + MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0)) /*SDRC_D17*/\
> + MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0)) /*SDRC_D18*/\
> + MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0)) /*SDRC_D19*/\
> + MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0)) /*SDRC_D20*/\
> + MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0)) /*SDRC_D21*/\
> + MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0)) /*SDRC_D22*/\
> + MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0)) /*SDRC_D23*/\
> + MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0)) /*SDRC_D24*/\
> + MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0)) /*SDRC_D25*/\
> + MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0)) /*SDRC_D26*/\
> + MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0)) /*SDRC_D27*/\
> + MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0)) /*SDRC_D28*/\
> + MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0)) /*SDRC_D29*/\
> + MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0)) /*SDRC_D30*/\
> + MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0)) /*SDRC_D31*/\
> + MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0)) /*SDRC_CLK*/\
> + MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0))
> /*SDRC_DQS0*/\
> + MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0))
> /*SDRC_DQS1*/\
> + MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0))
> /*SDRC_DQS2*/\
> + MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0))
> /*SDRC_DQS3*/\
> + /*GPMC*/\
> + MUX_VAL(CP(GPMC_A1), (IDIS | PTU | EN | M0)) /*GPMC_A1*/\
> + MUX_VAL(CP(GPMC_A2), (IDIS | PTU | EN | M0)) /*GPMC_A2*/\
> + MUX_VAL(CP(GPMC_A3), (IDIS | PTU | EN | M0)) /*GPMC_A3*/\
> + MUX_VAL(CP(GPMC_A4), (IDIS | PTU | EN | M0)) /*GPMC_A4*/\
> + MUX_VAL(CP(GPMC_A5), (IDIS | PTU | EN | M0)) /*GPMC_A5*/\
> + MUX_VAL(CP(GPMC_A6), (IDIS | PTU | EN | M0)) /*GPMC_A6*/\
> + MUX_VAL(CP(GPMC_A7), (IDIS | PTU | EN | M0)) /*GPMC_A7*/\
> + MUX_VAL(CP(GPMC_A8), (IDIS | PTU | EN | M0)) /*GPMC_A8*/\
> + MUX_VAL(CP(GPMC_A9), (IDIS | PTU | EN | M0)) /*GPMC_A9*/\
> + MUX_VAL(CP(GPMC_A10), (IDIS | PTU | EN | M0)) /*GPMC_A10*/\
> + MUX_VAL(CP(GPMC_D0), (IEN | PTU | EN | M0)) /*GPMC_D0*/\
> + MUX_VAL(CP(GPMC_D1), (IEN | PTU | EN | M0)) /*GPMC_D1*/\
> + MUX_VAL(CP(GPMC_D2), (IEN | PTU | EN | M0)) /*GPMC_D2*/\
> + MUX_VAL(CP(GPMC_D3), (IEN | PTU | EN | M0)) /*GPMC_D3*/\
> + MUX_VAL(CP(GPMC_D4), (IEN | PTU | EN | M0)) /*GPMC_D4*/\
> + MUX_VAL(CP(GPMC_D5), (IEN | PTU | EN | M0)) /*GPMC_D5*/\
> + MUX_VAL(CP(GPMC_D6), (IEN | PTU | EN | M0)) /*GPMC_D6*/\
> + MUX_VAL(CP(GPMC_D7), (IEN | PTU | EN | M0)) /*GPMC_D7*/\
> + MUX_VAL(CP(GPMC_D8), (IEN | PTU | EN | M0)) /*GPMC_D8*/\
> + MUX_VAL(CP(GPMC_D9), (IEN | PTU | EN | M0)) /*GPMC_D9*/\
> + MUX_VAL(CP(GPMC_D10), (IEN | PTU | EN | M0)) /*GPMC_D10*/\
> + MUX_VAL(CP(GPMC_D11), (IEN | PTU | EN | M0)) /*GPMC_D11*/\
> + MUX_VAL(CP(GPMC_D12), (IEN | PTU | EN | M0)) /*GPMC_D12*/\
> + MUX_VAL(CP(GPMC_D13), (IEN | PTU | EN | M0)) /*GPMC_D13*/\
> + MUX_VAL(CP(GPMC_D14), (IEN | PTU | EN | M0)) /*GPMC_D14*/\
> + MUX_VAL(CP(GPMC_D15), (IEN | PTU | EN | M0)) /*GPMC_D15*/\
> + MUX_VAL(CP(GPMC_NCS0), (IDIS | PTU | EN | M0))
> /*GPMC_nCS0*/\
> +/* SB-T35 Ethernet */\
> + MUX_VAL(CP(GPMC_NCS4), (IEN | PTU | EN | M0))
> /*GPMC_nCS4*/\
> +/* CM-T35 Ethernet */\
> + MUX_VAL(CP(GPMC_NCS5), (IDIS | PTU | DIS | M0))
> /*GPMC_nCS5*/\
> + MUX_VAL(CP(GPMC_CLK), (IEN | PTD | DIS | M4)) /*GPIO_59*/\
> + MUX_VAL(CP(GPMC_NADV_ALE), (IDIS | PTD | DIS | M0)) /*GPMC_nADV_ALE*/\
> + MUX_VAL(CP(GPMC_NOE), (IDIS | PTD | DIS | M0)) /*GPMC_nOE*/\
> + MUX_VAL(CP(GPMC_NWE), (IDIS | PTD | DIS | M0)) /*GPMC_nWE*/\
> + MUX_VAL(CP(GPMC_NBE0_CLE), (IDIS | PTU | EN | M0)) /*GPMC_nBE0_CLE*/\
> + MUX_VAL(CP(GPMC_NBE1), (IDIS | PTD | DIS | M4)) /*GPIO_61*/\
> + MUX_VAL(CP(GPMC_NWP), (IEN | PTD | DIS | M0)) /*GPMC_nWP*/\
> + MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0)) /*GPMC_WAIT0*/\
> + /*DSS*/\
> + MUX_VAL(CP(DSS_PCLK), (IDIS | PTD | DIS | M0)) /*DSS_PCLK*/\
> + MUX_VAL(CP(DSS_HSYNC), (IDIS | PTD | DIS | M0))
> /*DSS_HSYNC*/\
> + MUX_VAL(CP(DSS_VSYNC), (IDIS | PTD | DIS | M0))
> /*DSS_VSYNC*/\
> + MUX_VAL(CP(DSS_ACBIAS), (IDIS | PTD | DIS | M0)) /*DSS_ACBIAS*/\
> + MUX_VAL(CP(DSS_DATA0), (IDIS | PTD | DIS | M0))
> /*DSS_DATA0*/\
> + MUX_VAL(CP(DSS_DATA1), (IDIS | PTD | DIS | M0))
> /*DSS_DATA1*/\
> + MUX_VAL(CP(DSS_DATA2), (IDIS | PTD | DIS | M0))
> /*DSS_DATA2*/\
> + MUX_VAL(CP(DSS_DATA3), (IDIS | PTD | DIS | M0))
> /*DSS_DATA3*/\
> + MUX_VAL(CP(DSS_DATA4), (IDIS | PTD | DIS | M0))
> /*DSS_DATA4*/\
> + MUX_VAL(CP(DSS_DATA5), (IDIS | PTD | DIS | M0))
> /*DSS_DATA5*/\
> + MUX_VAL(CP(DSS_DATA6), (IDIS | PTD | DIS | M0))
> /*DSS_DATA6*/\
> + MUX_VAL(CP(DSS_DATA7), (IDIS | PTD | DIS | M0))
> /*DSS_DATA7*/\
> + MUX_VAL(CP(DSS_DATA8), (IDIS | PTD | DIS | M0))
> /*DSS_DATA8*/\
> + MUX_VAL(CP(DSS_DATA9), (IDIS | PTD | DIS | M0))
> /*DSS_DATA9*/\
> + MUX_VAL(CP(DSS_DATA10), (IDIS | PTD | DIS | M0)) /*DSS_DATA10*/\
> + MUX_VAL(CP(DSS_DATA11), (IDIS | PTD | DIS | M0)) /*DSS_DATA11*/\
> + MUX_VAL(CP(DSS_DATA12), (IDIS | PTD | DIS | M0)) /*DSS_DATA12*/\
> + MUX_VAL(CP(DSS_DATA13), (IDIS | PTD | DIS | M0)) /*DSS_DATA13*/\
> + MUX_VAL(CP(DSS_DATA14), (IDIS | PTD | DIS | M0)) /*DSS_DATA14*/\
> + MUX_VAL(CP(DSS_DATA15), (IDIS | PTD | DIS | M0)) /*DSS_DATA15*/\
> + MUX_VAL(CP(DSS_DATA16), (IDIS | PTD | DIS | M0)) /*DSS_DATA16*/\
> + MUX_VAL(CP(DSS_DATA17), (IDIS | PTD | DIS | M0)) /*DSS_DATA17*/\
> + MUX_VAL(CP(DSS_DATA18), (IDIS | PTD | DIS | M0)) /*DSS_DATA18*/\
> + MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M0)) /*DSS_DATA19*/\
> + MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M0)) /*DSS_DATA20*/\
> + MUX_VAL(CP(DSS_DATA21), (IDIS | PTD | DIS | M0)) /*DSS_DATA21*/\
> + MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M0)) /*DSS_DATA22*/\
> + MUX_VAL(CP(DSS_DATA23), (IDIS | PTD | DIS | M0)) /*DSS_DATA23*/\
> + /*Serial Interface*/\
> + MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTD | DIS | M0)) /*UART3_RX_IRRX*/\
> + MUX_VAL(CP(UART3_TX_IRTX), (IDIS | PTD | DIS | M0)) /*UART3_TX_IRTX*/\
> + MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0)) /*I2C1_SCL*/\
> + MUX_VAL(CP(I2C1_SDA), (IEN | PTU | EN | M0)) /*I2C1_SDA*/\
> + /*Control and debug */\
> + MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0)) /*SYS_32K*/\
> + MUX_VAL(CP(SYS_CLKREQ), (IEN | PTD | DIS | M0)) /*SYS_CLKREQ*/\
> + MUX_VAL(CP(SYS_NIRQ), (IEN | PTU | EN | M0)) /*SYS_nIRQ*/\
> + MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0)) /*SYS_OFF_MODE*/\
> + MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M0)) /*SYS_CLKOUT1*/\
> + MUX_VAL(CP(SYS_CLKOUT2), (IDIS | PTD | DIS | M4)) /*green LED*/\
> + MUX_VAL(CP(JTAG_nTRST), (IEN | PTD | DIS | M0)) /*JTAG_nTRST*/\
> + MUX_VAL(CP(JTAG_TCK), (IEN | PTD | DIS | M0)) /*JTAG_TCK*/\
> + MUX_VAL(CP(JTAG_TMS), (IEN | PTD | DIS | M0)) /*JTAG_TMS*/\
> + MUX_VAL(CP(JTAG_TDI), (IEN | PTD | DIS | M0)) /*JTAG_TDI*/\
> + MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0))
> /*sdrc_cke0*/\
> + MUX_VAL(CP(SDRC_CKE1), (IDIS | PTD | DIS | M7))
> /*sdrc_cke1*/\
> +
> +#endif
> diff --git a/board/cm-t35/config.mk b/board/cm-t35/config.mk
> new file mode 100644
> index 0000000..6d1a511
> --- /dev/null
> +++ b/board/cm-t35/config.mk
> @@ -0,0 +1,30 @@
> +#
> +# (C) Copyright 2009
> +# CompuLab, Ltd., <www.compulab.co.il>
> +#
> +# See file CREDITS for list of people who contributed to this
> +# project.
> +#
> +# This program is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU General Public License as
> +# published by the Free Software Foundation; either version 2 of
> +# the License, or (at your option) any later version.
> +#
> +# This program is distributed in the hope that it will be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program; if not, write to the Free Software
> +# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> +# MA 02111-1307 USA
> +#
> +# Physical Address:
> +# 8000'0000 (bank0)
> +#
> +# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
> +# (mem base + reserved)
> +
> +# For use with external or internal boots.
> +TEXT_BASE = 0x80e80000
> \ No newline at end of file
> diff --git a/include/configs/omap3_cm-t35.h b/include/configs/omap3_cm-
> t35.h
> new file mode 100755
> index 0000000..0fbb62f
> --- /dev/null
> +++ b/include/configs/omap3_cm-t35.h
> @@ -0,0 +1,301 @@
> +/*
> + * (C) Copyright 2009 CompuLab, Ltd.
> + *
> + * Authors :
> + * Igor Vaisbein <igor@compulab.co.il>
> + * Mike Rapoport <mike@compulab.co.il>
> + *
> + * Derived from omap3evm and Beagle Board by
> + * Manikandan Pillai <mani.pillai@ti.com>
> + * Richard Woodruff <r-woodruff2@ti.com>
> + * Syed Mohammed Khasim <x0khasim@ti.com>
> + *
> + * Configuration settings for the CompuLab CM-T35 board.
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +#ifndef __CONFIG_H
> +#define __CONFIG_H
> +#include <asm/sizes.h>
Please take a look at the latest config files. We have got rid of this.
http://git.denx.de/?p=u-boot/u-boot-ti.git;a=commit;h=9c44ddccb6602f620fc037974f3e4468ad8a7c0c
> +
> +/* High Level Configuration Options */
> +#define CONFIG_ARMCORTEXA8 1 /* This is an ARM V7 CPU core */
> +#define CONFIG_OMAP 1 /* in a TI OMAP core */
> +#define CONFIG_OMAP34XX 1 /* which is a 34XX */
> +#define CONFIG_OMAP3430 1 /* which is in a 3430 */
> +#define CONFIG_CM_T35 1 /* working with CM_T35 */
> +
> +#include <asm/arch/cpu.h> /* get chip and board defs */
> +#include <asm/arch/omap3.h>
> +
> +#define CONFIG_DISPLAY_CPUINFO 1
> +#define CONFIG_DISPLAY_BOARDINFO 1
> +
> +/* Clock Defines */
> +#define V_OSCK 26000000 /* Clock output from T2 */
> +#define V_SCLK (V_OSCK >> 1)
> +
> +#undef CONFIG_USE_IRQ /* no support for IRQs */
> +#define CONFIG_MISC_INIT_R
> +
> +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
> +#define CONFIG_SETUP_MEMORY_TAGS 1
> +#define CONFIG_INITRD_TAG 1
> +#define CONFIG_REVISION_TAG 1
> +
> +/* Size of malloc() pool */
> +#define CONFIG_ENV_SIZE SZ_128K /* Total Size
> Environment */
> + /* Sector */
> +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_512K)
> +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for */
> + /* initial data */
> +/* NS16550 Configuration */
> +#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */
> +
> +#define CONFIG_SYS_NS16550
> +#define CONFIG_SYS_NS16550_SERIAL
> +#define CONFIG_SYS_NS16550_REG_SIZE (-4)
> +#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
> +
> +/* serial console configuration */
> +#define CONFIG_CONS_INDEX 3
> +#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3
> +#define CONFIG_SERIAL3 3 /* UART3 */
> +
> +/* allow to overwrite serial and ethaddr */
> +#define CONFIG_ENV_OVERWRITE
> +#define CONFIG_BAUDRATE 115200
> +#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
> + 115200}
> +#define CONFIG_MMC 1
> +#define CONFIG_OMAP3_MMC 1
> +#define CONFIG_DOS_PARTITION 1
> +
> +/* commands to include */
> +#include <config_cmd_default.h>
> +
> +#define CONFIG_CMD_EXT2 /* EXT2 Support */
> +#define CONFIG_CMD_FAT /* FAT support */
> +#define CONFIG_CMD_JFFS2 /* JFFS2 Support */
> +#define CONFIG_CMD_YAFFS2 /* YAFFS2 Support */
> +#define CONFIG_CMD_UBI /* UBI Support */
> +#define CONFIG_CMD_MTDPARTS
> +
> +#define CONFIG_CMD_I2C /* I2C serial bus support */
> +#define CONFIG_CMD_MMC /* MMC support */
> +#define CONFIG_CMD_NAND /* NAND support */
> +#define CONFIG_CMD_DHCP
> +#define CONFIG_CMD_PING
> +
> +#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */
> +#undef CONFIG_CMD_FPGA /* FPGA configuration Support */
> +#undef CONFIG_CMD_IMLS /* List all found images */
> +
> +#define CONFIG_SYS_NO_FLASH
> +
> +/* I2C */
> +#define CONFIG_SYS_I2C_SPEED 100000
> +#define CONFIG_SYS_I2C_SLAVE 1
> +#define CONFIG_SYS_I2C_BUS 0
> +#define CONFIG_SYS_I2C_BUS_SELECT 1
> +#define CONFIG_DRIVER_OMAP34XX_I2C 1
> +
> +/* TWL4030 */
> +#define CONFIG_TWL4030_POWER 1
> +
> +/* Board NAND Info. */
> +#define CONFIG_NAND_OMAP_GPMC 1
> +#define GPMC_NAND_ECC_LP_x8_LAYOUT 1
> +#define OMAP34XX_GPMC_NAND_SMNAND 1
> +
> +#define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */
> + /* to access nand */
> +#define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */
> + /* to access */
> + /* nand at CS0 */
> +
> +#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of */
> + /* NAND devices */
> +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
> +
> +/* JFFS2 */
> +#define CONFIG_JFFS2_NAND
> +#define CONFIG_JFFS2_DEV "nand0"
> +#define CONFIG_SYS_MAX_MTD_BANKS (CONFIG_SYS_MAX_FLASH_BANKS + \
> + CONFIG_SYS_MAX_NAND_DEVICE)
> +#define CONFIG_SYS_JFFS2_MEM_NAND
> +#define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS
> +#define CONFIG_SYS_JFFS2_NUM_BANKS 1
> +
> +/* ubi/ubifs related definitions */
> +#define CONFIG_RBTREE
> +#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
> +#define CONFIG_MTD_PARTITIONS
> +
> +/* Environment information */
> +#define CONFIG_BOOTDELAY 3
> +
> +#define CONFIG_BOOTFILE uImage
> +
> +#define CONFIG_EXTRA_ENV_SETTINGS \
> + "loadaddr=0x82000000\0" \
> + "baudrate=115200\0"\
> + "console=ttyS2,115200n8\0" \
> + "autoload=no\0" \
> + "mmcargs=setenv bootargs console=${console} " \
> + "root=/dev/mmcblk0p2 rw " \
> + "rootfstype=ext3 rootwait\0" \
> + "nandargs=setenv bootargs console=${console} " \
> + "root=/dev/mtdblock4 rw " \
> + "rootfstype=jffs2\0" \
> + "loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \
> + "bootscript=echo Running bootscript from mmc ...; " \
> + "source ${loadaddr}\0" \
> + "loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \
> + "mmcboot=echo Booting from mmc ...; " \
> + "run mmcargs; " \
> + "bootm ${loadaddr}\0" \
> + "nandboot=echo Booting from nand ...; " \
> + "run nandargs; " \
> + "onenand read ${loadaddr} 280000 400000; " \
> + "bootm ${loadaddr}\0" \
> +
> +#define CONFIG_BOOTCOMMAND \
> + "if mmc init; then " \
> + "if run loadbootscript; then " \
> + "run bootscript; " \
> + "else " \
> + "if run loaduimage; then " \
> + "run mmcboot; " \
> + "else run nandboot; " \
> + "fi; " \
> + "fi; " \
> + "else run nandboot; fi"
> +
> +#define MTDIDS_DEFAULT "nand0=nand"
> +#define MTDPARTS_DEFAULT "mtdparts=nand:512k(xloader)," \
> + "1920k(u-boot)," \
> + "256k(env)," \
> + "4m(kernel)," \
> + "-(fs),"
> +
> +#define CONFIG_AUTO_COMPLETE 1
> +/*
> + * Miscellaneous configurable options
> + */
> +#define V_PROMPT "CM-T35 # "
> +
> +#define CONFIG_SYS_LONGHELP /* undef to save memory */
> +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
> +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
> +#define CONFIG_SYS_PROMPT V_PROMPT
> +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
> +
> +/* Print Buffer Size */
> +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
> + sizeof(CONFIG_SYS_PROMPT) + 16)
> +#define CONFIG_SYS_MAXARGS 16 /* max number of command */
> + /* args */
> +/* Boot Argument Buffer Size */
> +#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
> +
> +/* memtest works on */
> +#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0 + 0x01000000)
> +#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + 0x08000000)
> +
> +#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default load */
> + /* address */
> +
> +/*
> + * OMAP3 has 12 GP timers, they can be driven by the system clock
> + * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
> + * This rate is divided by a local divisor.
> + */
> +#define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2
> +#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
> +#define CONFIG_SYS_HZ 1000
> +
> +/*
> + * Stack sizes
> + *
> + * The stack sizes are set up in start.S using the settings below
> + */
> +#define CONFIG_STACKSIZE SZ_128K /* regular stack */
> +#ifdef CONFIG_USE_IRQ
> +#define CONFIG_STACKSIZE_IRQ SZ_4K /* IRQ stack */
> +#define CONFIG_STACKSIZE_FIQ SZ_4K /* FIQ stack */
> +#endif
> +
> +/* Physical Memory Map */
> +#define CONFIG_NR_DRAM_BANKS 1 /* CS1 may not be populated on CM-T35
> */
> +#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0
> +#define PHYS_SDRAM_1_SIZE SZ_32M /* at least 32 meg */
> +
> +/* SDRAM Bank Allocation method */
> +#define SDRC_R_B_C 1
> +
> +/* PISMO support */
> +#define PISMO1_NAND_SIZE GPMC_SIZE_128M
> +#define PISMO1_ONEN_SIZE GPMC_SIZE_128M
> +
> +#define CONFIG_SYS_MAX_FLASH_SECT 520 /* max number of sectors */
> + /* on one chip */
> +#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */
> +#define CONFIG_SYS_MONITOR_LEN SZ_256K /* Reserve 2 sectors
> */
> +
> +#define CONFIG_SYS_FLASH_BASE boot_flash_base
> +
> +/* Monitor at start of flash */
> +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
> +
> +#define CONFIG_ENV_IS_IN_NAND 1
> +
> +/* environment */
> +#define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */
> +
> +#define CONFIG_SYS_ENV_SECT_SIZE boot_flash_sec
> +#define CONFIG_ENV_OFFSET boot_flash_off
> +#define CONFIG_ENV_ADDR boot_flash_env_addr
> +
> +#ifndef __ASSEMBLY__
> +extern struct gpmc *gpmc_cfg;
> +extern unsigned int boot_flash_base;
> +extern volatile unsigned int boot_flash_env_addr;
> +extern unsigned int boot_flash_off;
> +extern unsigned int boot_flash_sec;
> +extern unsigned int boot_flash_type;
> +#endif
> +
> +/* SMSC9220 Ethernet */
> +#if defined(CONFIG_CMD_NET)
> +#define CONFIG_NET_MULTI
> +#define CONFIG_SMC911X
> +#define CONFIG_SMC911X_32_BIT
> +#endif /* (CONFIG_CMD_NET) */
> +
> +/* BOOTP fields */
> +#define CONFIG_BOOTP_SUBNETMASK 0x00000001
> +#define CONFIG_BOOTP_GATEWAY 0x00000002
> +#define CONFIG_BOOTP_HOSTNAME 0x00000004
> +#define CONFIG_BOOTP_BOOTPATH 0x00000010
> +
> +#define CONFIG_OMAP3_GPIO_6 1
> +
> +#endif /* __CONFIG_H */
> --
> 1.6.0.6
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
^ permalink raw reply [flat|nested] 13+ messages in thread
* [U-Boot] [PATCH] omap3: add CM-T35 board
2009-11-11 13:01 ` Paulraj, Sandeep
@ 2009-11-11 13:41 ` Mike Rapoport
2009-11-11 13:58 ` Peter Tyser
0 siblings, 1 reply; 13+ messages in thread
From: Mike Rapoport @ 2009-11-11 13:41 UTC (permalink / raw)
To: u-boot
Paulraj, Sandeep wrote:
>
>> -----Original Message-----
>> From: u-boot-bounces at lists.denx.de [mailto:u-boot-bounces at lists.denx.de]
>> On Behalf Of Mike Rapoport
>> Sent: Wednesday, November 11, 2009 3:03 AM
>> To: u-boot at lists.denx.de
>> Cc: Mike Rapoport
>> Subject: [U-Boot] [PATCH] omap3: add CM-T35 board
>>
>> Add CM-T35 board support
>>
>> Signed-off-by: Mike Rapoport <mike@compulab.co.il>
>> ---
>> Makefile | 3 +
>> board/cm-t35/Makefile | 47 ++++++
>> board/cm-t35/cm-t35.c | 196 ++++++++++++++++++++++++++
>> board/cm-t35/cm-t35.h | 173 +++++++++++++++++++++++
>> board/cm-t35/config.mk | 30 ++++
>> include/configs/omap3_cm-t35.h | 301
>
> If you look at the way OMAP3 is structured now.
> Board specific stuff goes into /board/ti/
>
> It has beagle, sdp, etc
As far as I know, U-Boot structures board files by board/vendor/board rather
than board/cpu-vendor/board. That's why I've put cm-t35 directly under board/,
just like overo.
>> ++++++++++++++++++++++++++++++++++++++++
>> 6 files changed, 750 insertions(+), 0 deletions(-)
>> create mode 100644 board/cm-t35/Makefile
>> create mode 100644 board/cm-t35/cm-t35.c
>> create mode 100644 board/cm-t35/cm-t35.h
>> create mode 100644 board/cm-t35/config.mk
>> create mode 100755 include/configs/omap3_cm-t35.h
>
> You also need entries to MAKEALL and MAINTAINERS
Ok, will add.
>> diff --git a/Makefile b/Makefile
>> index bcb3fe9..8771c90 100644
>> --- a/Makefile
>> +++ b/Makefile
>> @@ -3168,6 +3168,9 @@ omap3_zoom1_config : unconfig
>> omap3_zoom2_config : unconfig
>> @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom2 logicpd omap3
>>
>> +omap3_cm-t35_config : unconfig
>> + @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 cm-t35 NULL omap3
>> +
>> smdkc100_config: unconfig
>> @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 smdkc100 samsung s5pc1xx
>>
>> diff --git a/board/cm-t35/Makefile b/board/cm-t35/Makefile
>> new file mode 100644
>> index 0000000..7b80aaa
>> --- /dev/null
>> +++ b/board/cm-t35/Makefile
>> @@ -0,0 +1,47 @@
>> +#
>> +# (C) Copyright 2000, 2001, 2002
>> +# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
>> +#
>> +# See file CREDITS for list of people who contributed to this
>> +# project.
>> +#
>> +# This program is free software; you can redistribute it and/or
>> +# modify it under the terms of the GNU General Public License as
>> +# published by the Free Software Foundation; either version 2 of
>> +# the License, or (at your option) any later version.
>> +#
>> +# This program is distributed in the hope that it will be useful,
>> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
>> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> +# GNU General Public License for more details.
>> +#
>> +# You should have received a copy of the GNU General Public License
>> +# along with this program; if not, write to the Free Software
>> +# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
>> +# MA 02111-1307 USA
>> +#
>> +
>> +include $(TOPDIR)/config.mk
>> +
>> +LIB = $(obj)lib$(BOARD).a
>> +
>> +COBJS := cm-t35.o
>> +
>> +SRCS := $(COBJS:.o=.c)
>> +OBJS := $(addprefix $(obj),$(COBJS))
>> +
>> +$(LIB): $(obj).depend $(OBJS)
>> + $(AR) $(ARFLAGS) $@ $(OBJS)
>> +
>> +clean:
>> + rm -f $(OBJS)
>> +
>> +distclean: clean
>> + rm -f $(LIB) core *.bak $(obj).depend
>> +
>> +#########################################################################
>> +
>> +# defines $(obj).depend target
>> +include $(SRCTREE)/rules.mk
>> +
>> +sinclude $(obj).depend
>> diff --git a/board/cm-t35/cm-t35.c b/board/cm-t35/cm-t35.c
>> new file mode 100644
>> index 0000000..8f0be65
>> --- /dev/null
>> +++ b/board/cm-t35/cm-t35.c
>> @@ -0,0 +1,196 @@
>> +/*
>> + * (C) Copyright 2009
>> + * CompuLab, Ltd. <www.compulab.co.il>
>> + *
>> + * Authors :
>> + * Igor Vaisbein <igor@compulab.co.il>
>> + * Mike Rapoport <mike@compulab.co.il>
>> + *
>> + * Derived from omap3evm and Beagle Board by
>> + * Manikandan Pillai <mani.pillai@ti.com>
>> + * Richard Woodruff <r-woodruff2@ti.com>
>> + * Syed Mohammed Khasim <x0khasim@ti.com>
>> + *
>> + * See file CREDITS for list of people who contributed to this
>> + * project.
>> + *
>> + * This program is free software; you can redistribute it and/or
>> + * modify it under the terms of the GNU General Public License as
>> + * published by the Free Software Foundation; either version 2 of
>> + * the License, or (at your option) any later version.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> + * You should have received a copy of the GNU General Public License
>> + * along with this program; if not, write to the Free Software
>> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
>> + * MA 02111-1307 USA
>> + */
>> +
>> +#include <common.h>
>> +#include <netdev.h>
>> +#include <net.h>
>> +#include <i2c.h>
>> +#include <twl4030.h>
>> +
>> +#include <asm/io.h>
>> +#include <asm/arch/mem.h>
>> +#include <asm/arch/mux.h>
>> +#include <asm/arch/sys_proto.h>
>> +#include <asm/mach-types.h>
>> +
>> +#include "cm-t35.h"
>> +
>> +#define CM_T35_SMC911X_BASE 0x2C000000
>> +#define SB_T35_SMC911X_BASE (CM_T35_SMC911X_BASE + SZ_16M)
>> +
>> +static u32 gpmc_net_config[GPMC_MAX_REG] = {
>> + NET_GPMC_CONFIG1,
>> + NET_GPMC_CONFIG2,
>> + NET_GPMC_CONFIG3,
>> + NET_GPMC_CONFIG4,
>> + NET_GPMC_CONFIG5,
>> + NET_GPMC_CONFIG6,
>> + 0
>> +};
>> +
>> +DECLARE_GLOBAL_DATA_PTR;
>> +
>> +/*
>> + * Routine: setup_net_chip
>> + * Description: Setting up the configuration GPMC registers specific to
>> the
>> + * Ethernet hardware.
>> + */
>> +static void setup_net_chip(void)
>> +{
>> + struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE;
>> +
>> + enable_gpmc_cs_config(gpmc_net_config, &gpmc_cfg->cs[5],
>> + CM_T35_SMC911X_BASE, GPMC_SIZE_16M);
>> + enable_gpmc_cs_config(gpmc_net_config, &gpmc_cfg->cs[4],
>> + SB_T35_SMC911X_BASE, GPMC_SIZE_16M);
>> +
>> + /* Enable off mode for NWE in PADCONF_GPMC_NWE register */
>> + writew(readw(&ctrl_base->gpmc_nwe) | 0x0E00, &ctrl_base->gpmc_nwe);
>> +
>> + /* Enable off mode for NOE in PADCONF_GPMC_NADV_ALE register */
>> + writew(readw(&ctrl_base->gpmc_noe) | 0x0E00, &ctrl_base->gpmc_noe);
>> +
>> + /* Enable off mode for ALE in PADCONF_GPMC_NADV_ALE register */
>> + writew(readw(&ctrl_base->gpmc_nadv_ale) | 0x0E00,
>> + &ctrl_base->gpmc_nadv_ale);
>> +
>> + /* Reset the ethernet controller via TPS65930 GPIO */
>> + /* Set GPIO1 of TPS65930 as output */
>> + twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, 0x02,
>> + TWL4030_BASEADD_GPIO+0x03);
>> + /* Send a pulse on the GPIO pin */
>> + twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, 0x02,
>> + TWL4030_BASEADD_GPIO+0x0C);
>> + udelay(1);
>> + twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, 0x02,
>> + TWL4030_BASEADD_GPIO+0x09);
>> + udelay(1);
>> + twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, 0x02,
>> + TWL4030_BASEADD_GPIO+0x0C);
>> +
>> +}
>> +
>> +/*
>> + * Routine: board_init
>> + * Description: Early hardware init.
>> + */
>> +int board_init(void)
>> +{
>> + gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
>> +
>> + /* board id for Linux */
>> + gd->bd->bi_arch_number = MACH_TYPE_CM_T35;
>> + /* boot param addr */
>> + gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
>> +
>> + return 0;
>> +}
>> +
>> +/*
>> + * Routine: misc_init_r
>> + * Description: Init ethernet (done here so udelay works)
>> + */
>> +int misc_init_r(void)
>> +{
>> +
>> +#ifdef CONFIG_DRIVER_OMAP34XX_I2C
>> + i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
>> +#endif
>> +
>> +#if defined(CONFIG_CMD_NET)
>> + setup_net_chip();
>> +#endif
>> +
>> + dieid_num_r();
>> +
>> + return 0;
>> +}
>> +
>> +/*
>> + * Routine: set_muxconf_regs
>> + * Description: Setting up the configuration Mux registers specific to
>> the
>> + * hardware. Many pins need to be moved from protect to primary
>> + * mode.
>> + */
>> +void set_muxconf_regs(void)
>> +{
>> + MUX_CM_T35();
>> +}
>> +
>> +/*
>> + * Routine: handle_mac_address
>> + * Description: prepare MAC address for on-board Ethernet.
>> + */
>> +static int handle_mac_address(void)
>> +{
>> + unsigned char enetaddr[6];
>> + int rc;
>> +
>> + rc = eth_getenv_enetaddr("ethaddr", enetaddr);
>> + if (rc)
>> + return 0;
>> +
>> + rc = i2c_read(0x50, 0, 1, enetaddr, 6);
>> + if (rc)
>> + return rc;
>> +
>> + if (!is_valid_ether_addr(enetaddr))
>> + return -1;
>> +
>> + return eth_setenv_enetaddr("ethaddr", enetaddr);
>> +}
>> +
>> +/*
>> + * Routine: board_eth_init
>> + * Description: initialize module and base-board Ethernet chips
>> + */
>> +int board_eth_init(bd_t *bis)
>> +{
>> + int err1 = 0, err2 = 0;
>> +
>> +#ifdef CONFIG_SMC911X
>> + err1 = handle_mac_address();
>> + err2 = smc911x_initialize(0, CM_T35_SMC911X_BASE);
>> +
>> + if (err1 && !err2)
>> + printf("CM-T35: No MAC address found\n");
>> +
>> + err1 = smc911x_initialize(1, SB_T35_SMC911X_BASE);
>> +
>> + /* run eth_init to set up MAC address prior to OS boot */
>> + if (!err1 || !err2)
>> + err1 = eth_init(bis);
>> + else
>> + err1 = -1;
>> +#endif
>> + return err1;
>> +}
>> diff --git a/board/cm-t35/cm-t35.h b/board/cm-t35/cm-t35.h
>> new file mode 100644
>> index 0000000..d44d89e
>> --- /dev/null
>> +++ b/board/cm-t35/cm-t35.h
>> @@ -0,0 +1,173 @@
>> +/*
>> + * (C) Copyright 2009 CompuLab, Ltd
>> + * Authors:
>> + * Igor Vaisbein <igor@compulab.co.il>
>> + * Mike Rapoport <mike@compulab.co.il>
>> + *
>> + * See file CREDITS for list of people who contributed to this
>> + * project.
>> + *
>> + * This program is free software; you can redistribute it and/or
>> + * modify it under the terms of the GNU General Public License as
>> + * published by the Free Software Foundation; either version 2 of
>> + * the License, or (at your option) any later version.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> + * You should have received a copy of the GNU General Public License
>> + * along with this program; if not, write to the Free Software
>> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
>> + * MA 02111-1307 USA
>> + */
>> +#ifndef _CM_T35_H_
>> +#define _CM_T35_H_
>> +
>> +const omap3_sysinfo sysinfo = {
>> + DDR_DISCRETE,
>> + "CM-T35 board",
>> + "NAND",
>> +};
>> +
>> +/* static void setup_net_chip(void); */
>> +
>> +/*
>> + * IEN - Input Enable
>> + * IDIS - Input Disable
>> + * PTD - Pull type Down
>> + * PTU - Pull type Up
>> + * DIS - Pull type selection is inactive
>> + * EN - Pull type selection is active
>> + * M0 - Mode 0
>> + * The commented string gives the final mux configuration for that pin
>> + */
>> +#define MUX_CM_T35() \
>> + /*SDRC*/\
>> + MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)) /*SDRC_D0*/\
>> + MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0)) /*SDRC_D1*/\
>> + MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0)) /*SDRC_D2*/\
>> + MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0)) /*SDRC_D3*/\
>> + MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0)) /*SDRC_D4*/\
>> + MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0)) /*SDRC_D5*/\
>> + MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0)) /*SDRC_D6*/\
>> + MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0)) /*SDRC_D7*/\
>> + MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0)) /*SDRC_D8*/\
>> + MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0)) /*SDRC_D9*/\
>> + MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0)) /*SDRC_D10*/\
>> + MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0)) /*SDRC_D11*/\
>> + MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0)) /*SDRC_D12*/\
>> + MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0)) /*SDRC_D13*/\
>> + MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0)) /*SDRC_D14*/\
>> + MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0)) /*SDRC_D15*/\
>> + MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0)) /*SDRC_D16*/\
>> + MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0)) /*SDRC_D17*/\
>> + MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0)) /*SDRC_D18*/\
>> + MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0)) /*SDRC_D19*/\
>> + MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0)) /*SDRC_D20*/\
>> + MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0)) /*SDRC_D21*/\
>> + MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0)) /*SDRC_D22*/\
>> + MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0)) /*SDRC_D23*/\
>> + MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0)) /*SDRC_D24*/\
>> + MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0)) /*SDRC_D25*/\
>> + MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0)) /*SDRC_D26*/\
>> + MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0)) /*SDRC_D27*/\
>> + MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0)) /*SDRC_D28*/\
>> + MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0)) /*SDRC_D29*/\
>> + MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0)) /*SDRC_D30*/\
>> + MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0)) /*SDRC_D31*/\
>> + MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0)) /*SDRC_CLK*/\
>> + MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0))
>> /*SDRC_DQS0*/\
>> + MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0))
>> /*SDRC_DQS1*/\
>> + MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0))
>> /*SDRC_DQS2*/\
>> + MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0))
>> /*SDRC_DQS3*/\
>> + /*GPMC*/\
>> + MUX_VAL(CP(GPMC_A1), (IDIS | PTU | EN | M0)) /*GPMC_A1*/\
>> + MUX_VAL(CP(GPMC_A2), (IDIS | PTU | EN | M0)) /*GPMC_A2*/\
>> + MUX_VAL(CP(GPMC_A3), (IDIS | PTU | EN | M0)) /*GPMC_A3*/\
>> + MUX_VAL(CP(GPMC_A4), (IDIS | PTU | EN | M0)) /*GPMC_A4*/\
>> + MUX_VAL(CP(GPMC_A5), (IDIS | PTU | EN | M0)) /*GPMC_A5*/\
>> + MUX_VAL(CP(GPMC_A6), (IDIS | PTU | EN | M0)) /*GPMC_A6*/\
>> + MUX_VAL(CP(GPMC_A7), (IDIS | PTU | EN | M0)) /*GPMC_A7*/\
>> + MUX_VAL(CP(GPMC_A8), (IDIS | PTU | EN | M0)) /*GPMC_A8*/\
>> + MUX_VAL(CP(GPMC_A9), (IDIS | PTU | EN | M0)) /*GPMC_A9*/\
>> + MUX_VAL(CP(GPMC_A10), (IDIS | PTU | EN | M0)) /*GPMC_A10*/\
>> + MUX_VAL(CP(GPMC_D0), (IEN | PTU | EN | M0)) /*GPMC_D0*/\
>> + MUX_VAL(CP(GPMC_D1), (IEN | PTU | EN | M0)) /*GPMC_D1*/\
>> + MUX_VAL(CP(GPMC_D2), (IEN | PTU | EN | M0)) /*GPMC_D2*/\
>> + MUX_VAL(CP(GPMC_D3), (IEN | PTU | EN | M0)) /*GPMC_D3*/\
>> + MUX_VAL(CP(GPMC_D4), (IEN | PTU | EN | M0)) /*GPMC_D4*/\
>> + MUX_VAL(CP(GPMC_D5), (IEN | PTU | EN | M0)) /*GPMC_D5*/\
>> + MUX_VAL(CP(GPMC_D6), (IEN | PTU | EN | M0)) /*GPMC_D6*/\
>> + MUX_VAL(CP(GPMC_D7), (IEN | PTU | EN | M0)) /*GPMC_D7*/\
>> + MUX_VAL(CP(GPMC_D8), (IEN | PTU | EN | M0)) /*GPMC_D8*/\
>> + MUX_VAL(CP(GPMC_D9), (IEN | PTU | EN | M0)) /*GPMC_D9*/\
>> + MUX_VAL(CP(GPMC_D10), (IEN | PTU | EN | M0)) /*GPMC_D10*/\
>> + MUX_VAL(CP(GPMC_D11), (IEN | PTU | EN | M0)) /*GPMC_D11*/\
>> + MUX_VAL(CP(GPMC_D12), (IEN | PTU | EN | M0)) /*GPMC_D12*/\
>> + MUX_VAL(CP(GPMC_D13), (IEN | PTU | EN | M0)) /*GPMC_D13*/\
>> + MUX_VAL(CP(GPMC_D14), (IEN | PTU | EN | M0)) /*GPMC_D14*/\
>> + MUX_VAL(CP(GPMC_D15), (IEN | PTU | EN | M0)) /*GPMC_D15*/\
>> + MUX_VAL(CP(GPMC_NCS0), (IDIS | PTU | EN | M0))
>> /*GPMC_nCS0*/\
>> +/* SB-T35 Ethernet */\
>> + MUX_VAL(CP(GPMC_NCS4), (IEN | PTU | EN | M0))
>> /*GPMC_nCS4*/\
>> +/* CM-T35 Ethernet */\
>> + MUX_VAL(CP(GPMC_NCS5), (IDIS | PTU | DIS | M0))
>> /*GPMC_nCS5*/\
>> + MUX_VAL(CP(GPMC_CLK), (IEN | PTD | DIS | M4)) /*GPIO_59*/\
>> + MUX_VAL(CP(GPMC_NADV_ALE), (IDIS | PTD | DIS | M0)) /*GPMC_nADV_ALE*/\
>> + MUX_VAL(CP(GPMC_NOE), (IDIS | PTD | DIS | M0)) /*GPMC_nOE*/\
>> + MUX_VAL(CP(GPMC_NWE), (IDIS | PTD | DIS | M0)) /*GPMC_nWE*/\
>> + MUX_VAL(CP(GPMC_NBE0_CLE), (IDIS | PTU | EN | M0)) /*GPMC_nBE0_CLE*/\
>> + MUX_VAL(CP(GPMC_NBE1), (IDIS | PTD | DIS | M4)) /*GPIO_61*/\
>> + MUX_VAL(CP(GPMC_NWP), (IEN | PTD | DIS | M0)) /*GPMC_nWP*/\
>> + MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0)) /*GPMC_WAIT0*/\
>> + /*DSS*/\
>> + MUX_VAL(CP(DSS_PCLK), (IDIS | PTD | DIS | M0)) /*DSS_PCLK*/\
>> + MUX_VAL(CP(DSS_HSYNC), (IDIS | PTD | DIS | M0))
>> /*DSS_HSYNC*/\
>> + MUX_VAL(CP(DSS_VSYNC), (IDIS | PTD | DIS | M0))
>> /*DSS_VSYNC*/\
>> + MUX_VAL(CP(DSS_ACBIAS), (IDIS | PTD | DIS | M0)) /*DSS_ACBIAS*/\
>> + MUX_VAL(CP(DSS_DATA0), (IDIS | PTD | DIS | M0))
>> /*DSS_DATA0*/\
>> + MUX_VAL(CP(DSS_DATA1), (IDIS | PTD | DIS | M0))
>> /*DSS_DATA1*/\
>> + MUX_VAL(CP(DSS_DATA2), (IDIS | PTD | DIS | M0))
>> /*DSS_DATA2*/\
>> + MUX_VAL(CP(DSS_DATA3), (IDIS | PTD | DIS | M0))
>> /*DSS_DATA3*/\
>> + MUX_VAL(CP(DSS_DATA4), (IDIS | PTD | DIS | M0))
>> /*DSS_DATA4*/\
>> + MUX_VAL(CP(DSS_DATA5), (IDIS | PTD | DIS | M0))
>> /*DSS_DATA5*/\
>> + MUX_VAL(CP(DSS_DATA6), (IDIS | PTD | DIS | M0))
>> /*DSS_DATA6*/\
>> + MUX_VAL(CP(DSS_DATA7), (IDIS | PTD | DIS | M0))
>> /*DSS_DATA7*/\
>> + MUX_VAL(CP(DSS_DATA8), (IDIS | PTD | DIS | M0))
>> /*DSS_DATA8*/\
>> + MUX_VAL(CP(DSS_DATA9), (IDIS | PTD | DIS | M0))
>> /*DSS_DATA9*/\
>> + MUX_VAL(CP(DSS_DATA10), (IDIS | PTD | DIS | M0)) /*DSS_DATA10*/\
>> + MUX_VAL(CP(DSS_DATA11), (IDIS | PTD | DIS | M0)) /*DSS_DATA11*/\
>> + MUX_VAL(CP(DSS_DATA12), (IDIS | PTD | DIS | M0)) /*DSS_DATA12*/\
>> + MUX_VAL(CP(DSS_DATA13), (IDIS | PTD | DIS | M0)) /*DSS_DATA13*/\
>> + MUX_VAL(CP(DSS_DATA14), (IDIS | PTD | DIS | M0)) /*DSS_DATA14*/\
>> + MUX_VAL(CP(DSS_DATA15), (IDIS | PTD | DIS | M0)) /*DSS_DATA15*/\
>> + MUX_VAL(CP(DSS_DATA16), (IDIS | PTD | DIS | M0)) /*DSS_DATA16*/\
>> + MUX_VAL(CP(DSS_DATA17), (IDIS | PTD | DIS | M0)) /*DSS_DATA17*/\
>> + MUX_VAL(CP(DSS_DATA18), (IDIS | PTD | DIS | M0)) /*DSS_DATA18*/\
>> + MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M0)) /*DSS_DATA19*/\
>> + MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M0)) /*DSS_DATA20*/\
>> + MUX_VAL(CP(DSS_DATA21), (IDIS | PTD | DIS | M0)) /*DSS_DATA21*/\
>> + MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M0)) /*DSS_DATA22*/\
>> + MUX_VAL(CP(DSS_DATA23), (IDIS | PTD | DIS | M0)) /*DSS_DATA23*/\
>> + /*Serial Interface*/\
>> + MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTD | DIS | M0)) /*UART3_RX_IRRX*/\
>> + MUX_VAL(CP(UART3_TX_IRTX), (IDIS | PTD | DIS | M0)) /*UART3_TX_IRTX*/\
>> + MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0)) /*I2C1_SCL*/\
>> + MUX_VAL(CP(I2C1_SDA), (IEN | PTU | EN | M0)) /*I2C1_SDA*/\
>> + /*Control and debug */\
>> + MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0)) /*SYS_32K*/\
>> + MUX_VAL(CP(SYS_CLKREQ), (IEN | PTD | DIS | M0)) /*SYS_CLKREQ*/\
>> + MUX_VAL(CP(SYS_NIRQ), (IEN | PTU | EN | M0)) /*SYS_nIRQ*/\
>> + MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0)) /*SYS_OFF_MODE*/\
>> + MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M0)) /*SYS_CLKOUT1*/\
>> + MUX_VAL(CP(SYS_CLKOUT2), (IDIS | PTD | DIS | M4)) /*green LED*/\
>> + MUX_VAL(CP(JTAG_nTRST), (IEN | PTD | DIS | M0)) /*JTAG_nTRST*/\
>> + MUX_VAL(CP(JTAG_TCK), (IEN | PTD | DIS | M0)) /*JTAG_TCK*/\
>> + MUX_VAL(CP(JTAG_TMS), (IEN | PTD | DIS | M0)) /*JTAG_TMS*/\
>> + MUX_VAL(CP(JTAG_TDI), (IEN | PTD | DIS | M0)) /*JTAG_TDI*/\
>> + MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0))
>> /*sdrc_cke0*/\
>> + MUX_VAL(CP(SDRC_CKE1), (IDIS | PTD | DIS | M7))
>> /*sdrc_cke1*/\
>> +
>> +#endif
>> diff --git a/board/cm-t35/config.mk b/board/cm-t35/config.mk
>> new file mode 100644
>> index 0000000..6d1a511
>> --- /dev/null
>> +++ b/board/cm-t35/config.mk
>> @@ -0,0 +1,30 @@
>> +#
>> +# (C) Copyright 2009
>> +# CompuLab, Ltd., <www.compulab.co.il>
>> +#
>> +# See file CREDITS for list of people who contributed to this
>> +# project.
>> +#
>> +# This program is free software; you can redistribute it and/or
>> +# modify it under the terms of the GNU General Public License as
>> +# published by the Free Software Foundation; either version 2 of
>> +# the License, or (at your option) any later version.
>> +#
>> +# This program is distributed in the hope that it will be useful,
>> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
>> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> +# GNU General Public License for more details.
>> +#
>> +# You should have received a copy of the GNU General Public License
>> +# along with this program; if not, write to the Free Software
>> +# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
>> +# MA 02111-1307 USA
>> +#
>> +# Physical Address:
>> +# 8000'0000 (bank0)
>> +#
>> +# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
>> +# (mem base + reserved)
>> +
>> +# For use with external or internal boots.
>> +TEXT_BASE = 0x80e80000
>> \ No newline at end of file
>> diff --git a/include/configs/omap3_cm-t35.h b/include/configs/omap3_cm-
>> t35.h
>> new file mode 100755
>> index 0000000..0fbb62f
>> --- /dev/null
>> +++ b/include/configs/omap3_cm-t35.h
>> @@ -0,0 +1,301 @@
>> +/*
>> + * (C) Copyright 2009 CompuLab, Ltd.
>> + *
>> + * Authors :
>> + * Igor Vaisbein <igor@compulab.co.il>
>> + * Mike Rapoport <mike@compulab.co.il>
>> + *
>> + * Derived from omap3evm and Beagle Board by
>> + * Manikandan Pillai <mani.pillai@ti.com>
>> + * Richard Woodruff <r-woodruff2@ti.com>
>> + * Syed Mohammed Khasim <x0khasim@ti.com>
>> + *
>> + * Configuration settings for the CompuLab CM-T35 board.
>> + *
>> + * See file CREDITS for list of people who contributed to this
>> + * project.
>> + *
>> + * This program is free software; you can redistribute it and/or
>> + * modify it under the terms of the GNU General Public License as
>> + * published by the Free Software Foundation; either version 2 of
>> + * the License, or (at your option) any later version.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> + * You should have received a copy of the GNU General Public License
>> + * along with this program; if not, write to the Free Software
>> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
>> + * MA 02111-1307 USA
>> + */
>> +
>> +#ifndef __CONFIG_H
>> +#define __CONFIG_H
>> +#include <asm/sizes.h>
>
> Please take a look at the latest config files. We have got rid of this.
>
>
> http://git.denx.de/?p=u-boot/u-boot-ti.git;a=commit;h=9c44ddccb6602f620fc037974f3e4468ad8a7c0c
Will fix.
>> +
>> +/* High Level Configuration Options */
>> +#define CONFIG_ARMCORTEXA8 1 /* This is an ARM V7 CPU core */
>> +#define CONFIG_OMAP 1 /* in a TI OMAP core */
>> +#define CONFIG_OMAP34XX 1 /* which is a 34XX */
>> +#define CONFIG_OMAP3430 1 /* which is in a 3430 */
>> +#define CONFIG_CM_T35 1 /* working with CM_T35 */
>> +
>> +#include <asm/arch/cpu.h> /* get chip and board defs */
>> +#include <asm/arch/omap3.h>
>> +
>> +#define CONFIG_DISPLAY_CPUINFO 1
>> +#define CONFIG_DISPLAY_BOARDINFO 1
>> +
>> +/* Clock Defines */
>> +#define V_OSCK 26000000 /* Clock output from T2 */
>> +#define V_SCLK (V_OSCK >> 1)
>> +
>> +#undef CONFIG_USE_IRQ /* no support for IRQs */
>> +#define CONFIG_MISC_INIT_R
>> +
>> +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
>> +#define CONFIG_SETUP_MEMORY_TAGS 1
>> +#define CONFIG_INITRD_TAG 1
>> +#define CONFIG_REVISION_TAG 1
>> +
>> +/* Size of malloc() pool */
>> +#define CONFIG_ENV_SIZE SZ_128K /* Total Size
>> Environment */
>> + /* Sector */
>> +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_512K)
>> +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for */
>> + /* initial data */
>> +/* NS16550 Configuration */
>> +#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */
>> +
>> +#define CONFIG_SYS_NS16550
>> +#define CONFIG_SYS_NS16550_SERIAL
>> +#define CONFIG_SYS_NS16550_REG_SIZE (-4)
>> +#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
>> +
>> +/* serial console configuration */
>> +#define CONFIG_CONS_INDEX 3
>> +#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3
>> +#define CONFIG_SERIAL3 3 /* UART3 */
>> +
>> +/* allow to overwrite serial and ethaddr */
>> +#define CONFIG_ENV_OVERWRITE
>> +#define CONFIG_BAUDRATE 115200
>> +#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
>> + 115200}
>> +#define CONFIG_MMC 1
>> +#define CONFIG_OMAP3_MMC 1
>> +#define CONFIG_DOS_PARTITION 1
>> +
>> +/* commands to include */
>> +#include <config_cmd_default.h>
>> +
>> +#define CONFIG_CMD_EXT2 /* EXT2 Support */
>> +#define CONFIG_CMD_FAT /* FAT support */
>> +#define CONFIG_CMD_JFFS2 /* JFFS2 Support */
>> +#define CONFIG_CMD_YAFFS2 /* YAFFS2 Support */
>> +#define CONFIG_CMD_UBI /* UBI Support */
>> +#define CONFIG_CMD_MTDPARTS
>> +
>> +#define CONFIG_CMD_I2C /* I2C serial bus support */
>> +#define CONFIG_CMD_MMC /* MMC support */
>> +#define CONFIG_CMD_NAND /* NAND support */
>> +#define CONFIG_CMD_DHCP
>> +#define CONFIG_CMD_PING
>> +
>> +#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */
>> +#undef CONFIG_CMD_FPGA /* FPGA configuration Support */
>> +#undef CONFIG_CMD_IMLS /* List all found images */
>> +
>> +#define CONFIG_SYS_NO_FLASH
>> +
>> +/* I2C */
>> +#define CONFIG_SYS_I2C_SPEED 100000
>> +#define CONFIG_SYS_I2C_SLAVE 1
>> +#define CONFIG_SYS_I2C_BUS 0
>> +#define CONFIG_SYS_I2C_BUS_SELECT 1
>> +#define CONFIG_DRIVER_OMAP34XX_I2C 1
>> +
>> +/* TWL4030 */
>> +#define CONFIG_TWL4030_POWER 1
>> +
>> +/* Board NAND Info. */
>> +#define CONFIG_NAND_OMAP_GPMC 1
>> +#define GPMC_NAND_ECC_LP_x8_LAYOUT 1
>> +#define OMAP34XX_GPMC_NAND_SMNAND 1
>> +
>> +#define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */
>> + /* to access nand */
>> +#define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */
>> + /* to access */
>> + /* nand at CS0 */
>> +
>> +#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of */
>> + /* NAND devices */
>> +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
>> +
>> +/* JFFS2 */
>> +#define CONFIG_JFFS2_NAND
>> +#define CONFIG_JFFS2_DEV "nand0"
>> +#define CONFIG_SYS_MAX_MTD_BANKS (CONFIG_SYS_MAX_FLASH_BANKS + \
>> + CONFIG_SYS_MAX_NAND_DEVICE)
>> +#define CONFIG_SYS_JFFS2_MEM_NAND
>> +#define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS
>> +#define CONFIG_SYS_JFFS2_NUM_BANKS 1
>> +
>> +/* ubi/ubifs related definitions */
>> +#define CONFIG_RBTREE
>> +#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
>> +#define CONFIG_MTD_PARTITIONS
>> +
>> +/* Environment information */
>> +#define CONFIG_BOOTDELAY 3
>> +
>> +#define CONFIG_BOOTFILE uImage
>> +
>> +#define CONFIG_EXTRA_ENV_SETTINGS \
>> + "loadaddr=0x82000000\0" \
>> + "baudrate=115200\0"\
>> + "console=ttyS2,115200n8\0" \
>> + "autoload=no\0" \
>> + "mmcargs=setenv bootargs console=${console} " \
>> + "root=/dev/mmcblk0p2 rw " \
>> + "rootfstype=ext3 rootwait\0" \
>> + "nandargs=setenv bootargs console=${console} " \
>> + "root=/dev/mtdblock4 rw " \
>> + "rootfstype=jffs2\0" \
>> + "loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \
>> + "bootscript=echo Running bootscript from mmc ...; " \
>> + "source ${loadaddr}\0" \
>> + "loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \
>> + "mmcboot=echo Booting from mmc ...; " \
>> + "run mmcargs; " \
>> + "bootm ${loadaddr}\0" \
>> + "nandboot=echo Booting from nand ...; " \
>> + "run nandargs; " \
>> + "onenand read ${loadaddr} 280000 400000; " \
>> + "bootm ${loadaddr}\0" \
>> +
>> +#define CONFIG_BOOTCOMMAND \
>> + "if mmc init; then " \
>> + "if run loadbootscript; then " \
>> + "run bootscript; " \
>> + "else " \
>> + "if run loaduimage; then " \
>> + "run mmcboot; " \
>> + "else run nandboot; " \
>> + "fi; " \
>> + "fi; " \
>> + "else run nandboot; fi"
>> +
>> +#define MTDIDS_DEFAULT "nand0=nand"
>> +#define MTDPARTS_DEFAULT "mtdparts=nand:512k(xloader)," \
>> + "1920k(u-boot)," \
>> + "256k(env)," \
>> + "4m(kernel)," \
>> + "-(fs),"
>> +
>> +#define CONFIG_AUTO_COMPLETE 1
>> +/*
>> + * Miscellaneous configurable options
>> + */
>> +#define V_PROMPT "CM-T35 # "
>> +
>> +#define CONFIG_SYS_LONGHELP /* undef to save memory */
>> +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
>> +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
>> +#define CONFIG_SYS_PROMPT V_PROMPT
>> +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
>> +
>> +/* Print Buffer Size */
>> +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
>> + sizeof(CONFIG_SYS_PROMPT) + 16)
>> +#define CONFIG_SYS_MAXARGS 16 /* max number of command */
>> + /* args */
>> +/* Boot Argument Buffer Size */
>> +#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
>> +
>> +/* memtest works on */
>> +#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0 + 0x01000000)
>> +#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + 0x08000000)
>> +
>> +#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default load */
>> + /* address */
>> +
>> +/*
>> + * OMAP3 has 12 GP timers, they can be driven by the system clock
>> + * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
>> + * This rate is divided by a local divisor.
>> + */
>> +#define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2
>> +#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
>> +#define CONFIG_SYS_HZ 1000
>> +
>> +/*
>> + * Stack sizes
>> + *
>> + * The stack sizes are set up in start.S using the settings below
>> + */
>> +#define CONFIG_STACKSIZE SZ_128K /* regular stack */
>> +#ifdef CONFIG_USE_IRQ
>> +#define CONFIG_STACKSIZE_IRQ SZ_4K /* IRQ stack */
>> +#define CONFIG_STACKSIZE_FIQ SZ_4K /* FIQ stack */
>> +#endif
>> +
>> +/* Physical Memory Map */
>> +#define CONFIG_NR_DRAM_BANKS 1 /* CS1 may not be populated on CM-T35
>> */
>> +#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0
>> +#define PHYS_SDRAM_1_SIZE SZ_32M /* at least 32 meg */
>> +
>> +/* SDRAM Bank Allocation method */
>> +#define SDRC_R_B_C 1
>> +
>> +/* PISMO support */
>> +#define PISMO1_NAND_SIZE GPMC_SIZE_128M
>> +#define PISMO1_ONEN_SIZE GPMC_SIZE_128M
>> +
>> +#define CONFIG_SYS_MAX_FLASH_SECT 520 /* max number of sectors */
>> + /* on one chip */
>> +#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */
>> +#define CONFIG_SYS_MONITOR_LEN SZ_256K /* Reserve 2 sectors
>> */
>> +
>> +#define CONFIG_SYS_FLASH_BASE boot_flash_base
>> +
>> +/* Monitor at start of flash */
>> +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
>> +
>> +#define CONFIG_ENV_IS_IN_NAND 1
>> +
>> +/* environment */
>> +#define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */
>> +
>> +#define CONFIG_SYS_ENV_SECT_SIZE boot_flash_sec
>> +#define CONFIG_ENV_OFFSET boot_flash_off
>> +#define CONFIG_ENV_ADDR boot_flash_env_addr
>> +
>> +#ifndef __ASSEMBLY__
>> +extern struct gpmc *gpmc_cfg;
>> +extern unsigned int boot_flash_base;
>> +extern volatile unsigned int boot_flash_env_addr;
>> +extern unsigned int boot_flash_off;
>> +extern unsigned int boot_flash_sec;
>> +extern unsigned int boot_flash_type;
>> +#endif
>> +
>> +/* SMSC9220 Ethernet */
>> +#if defined(CONFIG_CMD_NET)
>> +#define CONFIG_NET_MULTI
>> +#define CONFIG_SMC911X
>> +#define CONFIG_SMC911X_32_BIT
>> +#endif /* (CONFIG_CMD_NET) */
>> +
>> +/* BOOTP fields */
>> +#define CONFIG_BOOTP_SUBNETMASK 0x00000001
>> +#define CONFIG_BOOTP_GATEWAY 0x00000002
>> +#define CONFIG_BOOTP_HOSTNAME 0x00000004
>> +#define CONFIG_BOOTP_BOOTPATH 0x00000010
>> +
>> +#define CONFIG_OMAP3_GPIO_6 1
>> +
>> +#endif /* __CONFIG_H */
>> --
>> 1.6.0.6
>>
>> _______________________________________________
>> U-Boot mailing list
>> U-Boot at lists.denx.de
>> http://lists.denx.de/mailman/listinfo/u-boot
>
>
--
Sincerely yours,
Mike.
^ permalink raw reply [flat|nested] 13+ messages in thread
* [U-Boot] [PATCH] omap3: add CM-T35 board
2009-11-11 13:41 ` Mike Rapoport
@ 2009-11-11 13:58 ` Peter Tyser
2009-11-11 14:07 ` Mike Rapoport
0 siblings, 1 reply; 13+ messages in thread
From: Peter Tyser @ 2009-11-11 13:58 UTC (permalink / raw)
To: u-boot
On Wed, 2009-11-11 at 15:41 +0200, Mike Rapoport wrote:
> Paulraj, Sandeep wrote:
> >
> >> -----Original Message-----
> >> From: u-boot-bounces at lists.denx.de [mailto:u-boot-bounces at lists.denx.de]
> >> On Behalf Of Mike Rapoport
> >> Sent: Wednesday, November 11, 2009 3:03 AM
> >> To: u-boot at lists.denx.de
> >> Cc: Mike Rapoport
> >> Subject: [U-Boot] [PATCH] omap3: add CM-T35 board
> >>
> >> Add CM-T35 board support
> >>
> >> Signed-off-by: Mike Rapoport <mike@compulab.co.il>
> >> ---
> >> Makefile | 3 +
> >> board/cm-t35/Makefile | 47 ++++++
> >> board/cm-t35/cm-t35.c | 196 ++++++++++++++++++++++++++
> >> board/cm-t35/cm-t35.h | 173 +++++++++++++++++++++++
> >> board/cm-t35/config.mk | 30 ++++
> >> include/configs/omap3_cm-t35.h | 301
> >
> > If you look at the way OMAP3 is structured now.
> > Board specific stuff goes into /board/ti/
> >
> > It has beagle, sdp, etc
>
> As far as I know, U-Boot structures board files by board/vendor/board rather
> than board/cpu-vendor/board. That's why I've put cm-t35 directly under board/,
> just like overo.
Agreed. You should use board/$vendor/$board if $vendor plans on having
more than 1 board, and board/$board is OK if you're only supporting this
one board.
<snip>
> >> --- a/Makefile
> >> +++ b/Makefile
> >> @@ -3168,6 +3168,9 @@ omap3_zoom1_config : unconfig
> >> omap3_zoom2_config : unconfig
> >> @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom2 logicpd omap3
> >>
> >> +omap3_cm-t35_config : unconfig
> >> + @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 cm-t35 NULL omap3
> >> +
I'd title your _config rule the same as your board name, ie drop the
omap3_ prefix above. And the above list should be alphabetically
sorted.
Best,
Peter
^ permalink raw reply [flat|nested] 13+ messages in thread
* [U-Boot] [PATCH] omap3: add CM-T35 board
2009-11-11 13:58 ` Peter Tyser
@ 2009-11-11 14:07 ` Mike Rapoport
2009-11-11 14:18 ` Peter Tyser
2009-11-11 21:35 ` Wolfgang Denk
0 siblings, 2 replies; 13+ messages in thread
From: Mike Rapoport @ 2009-11-11 14:07 UTC (permalink / raw)
To: u-boot
Peter Tyser wrote:
> On Wed, 2009-11-11 at 15:41 +0200, Mike Rapoport wrote:
>> Paulraj, Sandeep wrote:
>>>> -----Original Message-----
>>>> From: u-boot-bounces at lists.denx.de [mailto:u-boot-bounces at lists.denx.de]
>>>> On Behalf Of Mike Rapoport
>>>> Sent: Wednesday, November 11, 2009 3:03 AM
>>>> To: u-boot at lists.denx.de
>>>> Cc: Mike Rapoport
>>>> Subject: [U-Boot] [PATCH] omap3: add CM-T35 board
>>>>
>>>> Add CM-T35 board support
>>>>
>>>> Signed-off-by: Mike Rapoport <mike@compulab.co.il>
>>>> ---
>>>> Makefile | 3 +
>>>> board/cm-t35/Makefile | 47 ++++++
>>>> board/cm-t35/cm-t35.c | 196 ++++++++++++++++++++++++++
>>>> board/cm-t35/cm-t35.h | 173 +++++++++++++++++++++++
>>>> board/cm-t35/config.mk | 30 ++++
>>>> include/configs/omap3_cm-t35.h | 301
>>> If you look at the way OMAP3 is structured now.
>>> Board specific stuff goes into /board/ti/
>>>
>>> It has beagle, sdp, etc
>> As far as I know, U-Boot structures board files by board/vendor/board rather
>> than board/cpu-vendor/board. That's why I've put cm-t35 directly under board/,
>> just like overo.
>
> Agreed. You should use board/$vendor/$board if $vendor plans on having
> more than 1 board, and board/$board is OK if you're only supporting this
> one board.
>
> <snip>
>
>>>> --- a/Makefile
>>>> +++ b/Makefile
>>>> @@ -3168,6 +3168,9 @@ omap3_zoom1_config : unconfig
>>>> omap3_zoom2_config : unconfig
>>>> @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom2 logicpd omap3
>>>>
>>>> +omap3_cm-t35_config : unconfig
>>>> + @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 cm-t35 NULL omap3
>>>> +
>
> I'd title your _config rule the same as your board name, ie drop the
> omap3_ prefix above. And the above list should be alphabetically
> sorted.
I'd prefer to keep the 'omap3_' prefix to stay inline with other omap3 boards.
> Best,
> Peter
>
>
--
Sincerely yours,
Mike.
^ permalink raw reply [flat|nested] 13+ messages in thread
* [U-Boot] [PATCH] omap3: add CM-T35 board
2009-11-11 14:07 ` Mike Rapoport
@ 2009-11-11 14:18 ` Peter Tyser
2009-11-11 14:24 ` Tom
2009-11-11 21:35 ` Wolfgang Denk
1 sibling, 1 reply; 13+ messages in thread
From: Peter Tyser @ 2009-11-11 14:18 UTC (permalink / raw)
To: u-boot
<snip>
> >>>> --- a/Makefile
> >>>> +++ b/Makefile
> >>>> @@ -3168,6 +3168,9 @@ omap3_zoom1_config : unconfig
> >>>> omap3_zoom2_config : unconfig
> >>>> @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom2 logicpd omap3
> >>>>
> >>>> +omap3_cm-t35_config : unconfig
> >>>> + @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 cm-t35 NULL omap3
> >>>> +
> >
> > I'd title your _config rule the same as your board name, ie drop the
> > omap3_ prefix above. And the above list should be alphabetically
> > sorted.
>
> I'd prefer to keep the 'omap3_' prefix to stay inline with other omap3 boards.
Just because the other omap3_ board are wrong doesn't mean your board
should be too:) This same question was discussed for the devkit8000:
http://www.mail-archive.com/u-boot at lists.denx.de/msg21317.html
Best,
Peter
^ permalink raw reply [flat|nested] 13+ messages in thread
* [U-Boot] [PATCH] omap3: add CM-T35 board
2009-11-11 14:18 ` Peter Tyser
@ 2009-11-11 14:24 ` Tom
2009-11-11 14:56 ` Mike Rapoport
0 siblings, 1 reply; 13+ messages in thread
From: Tom @ 2009-11-11 14:24 UTC (permalink / raw)
To: u-boot
Peter Tyser wrote:
> <snip>
>
>>>>>> --- a/Makefile
>>>>>> +++ b/Makefile
>>>>>> @@ -3168,6 +3168,9 @@ omap3_zoom1_config : unconfig
>>>>>> omap3_zoom2_config : unconfig
>>>>>> @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom2 logicpd omap3
>>>>>>
>>>>>> +omap3_cm-t35_config : unconfig
>>>>>> + @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 cm-t35 NULL omap3
>>>>>> +
>>> I'd title your _config rule the same as your board name, ie drop the
>>> omap3_ prefix above. And the above list should be alphabetically
>>> sorted.
>> I'd prefer to keep the 'omap3_' prefix to stay inline with other omap3 boards.
>
> Just because the other omap3_ board are wrong doesn't mean your board
> should be too:) This same question was discussed for the devkit8000:
> http://www.mail-archive.com/u-boot at lists.denx.de/msg21317.html
>
Please drop the omap3_ prefix.
New boards are following the standard convention.
Tom
^ permalink raw reply [flat|nested] 13+ messages in thread
* [U-Boot] [PATCH] omap3: add CM-T35 board
2009-11-11 14:24 ` Tom
@ 2009-11-11 14:56 ` Mike Rapoport
0 siblings, 0 replies; 13+ messages in thread
From: Mike Rapoport @ 2009-11-11 14:56 UTC (permalink / raw)
To: u-boot
Tom wrote:
> Peter Tyser wrote:
>> <snip>
>>
>>>>>>> --- a/Makefile
>>>>>>> +++ b/Makefile
>>>>>>> @@ -3168,6 +3168,9 @@ omap3_zoom1_config : unconfig
>>>>>>> omap3_zoom2_config : unconfig
>>>>>>> @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom2 logicpd
>>>>>>> omap3
>>>>>>>
>>>>>>> +omap3_cm-t35_config : unconfig
>>>>>>> + @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 cm-t35 NULL omap3
>>>>>>> +
>>>> I'd title your _config rule the same as your board name, ie drop the
>>>> omap3_ prefix above. And the above list should be alphabetically
>>>> sorted.
>>> I'd prefer to keep the 'omap3_' prefix to stay inline with other
>>> omap3 boards.
>>
>> Just because the other omap3_ board are wrong doesn't mean your board
>> should be too:) This same question was discussed for the devkit8000:
>> http://www.mail-archive.com/u-boot at lists.denx.de/msg21317.html
>>
>
> Please drop the omap3_ prefix.
> New boards are following the standard convention.
Ok
> Tom
>
>
--
Sincerely yours,
Mike.
^ permalink raw reply [flat|nested] 13+ messages in thread
* [U-Boot] [PATCH] omap3: add CM-T35 board
2009-11-11 14:07 ` Mike Rapoport
2009-11-11 14:18 ` Peter Tyser
@ 2009-11-11 21:35 ` Wolfgang Denk
1 sibling, 0 replies; 13+ messages in thread
From: Wolfgang Denk @ 2009-11-11 21:35 UTC (permalink / raw)
To: u-boot
Dear Mike Rapoport,
In message <4AFAC505.5000003@compulab.co.il> you wrote:
>
> > I'd title your _config rule the same as your board name, ie drop the
> > omap3_ prefix above. And the above list should be alphabetically
> > sorted.
>
> I'd prefer to keep the 'omap3_' prefix to stay inline with other omap3 boards.
Please drop it. The other Omap3 boards need to be fixed later.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
There are certain things men must do to remain men.
-- Kirk, "The Ultimate Computer", stardate 4929.4
^ permalink raw reply [flat|nested] 13+ messages in thread
* [U-Boot] [PATCH] OMAP3: add CM-T35 board
@ 2010-11-23 7:29 Mike Rapoport
2010-11-24 2:58 ` Nishanth Menon
0 siblings, 1 reply; 13+ messages in thread
From: Mike Rapoport @ 2010-11-23 7:29 UTC (permalink / raw)
To: u-boot
This patch adds support for CM-T35 board
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
---
MAINTAINERS | 4 +
MAKEALL | 1 +
board/cm_t35/Makefile | 47 ++++++
board/cm_t35/cm_t35.c | 222 ++++++++++++++++++++++++++++
board/cm_t35/cm_t35.h | 184 +++++++++++++++++++++++
board/cm_t35/config.mk | 30 ++++
boards.cfg | 1 +
doc/README.omap3 | 16 ++-
include/configs/cm_t35.h | 364 ++++++++++++++++++++++++++++++++++++++++++++++
9 files changed, 867 insertions(+), 2 deletions(-)
create mode 100644 board/cm_t35/Makefile
create mode 100644 board/cm_t35/cm_t35.c
create mode 100644 board/cm_t35/cm_t35.h
create mode 100644 board/cm_t35/config.mk
create mode 100644 include/configs/cm_t35.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 9258cb1..b44b843 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -750,6 +750,10 @@ Stelian Pop <stelian.pop@leadtechdesign.com>
at91sam9263ek ARM926EJS (AT91SAM9263 SoC)
at91sam9rlek ARM926EJS (AT91SAM9RL SoC)
+Mike Rapoport <mike@compulab.co.il>
+
+ cm_t35 ARM ARMV7 (OMAP3xx SoC)
+
Tom Rix <Tom.Rix@windriver.com>
omap3_zoom2 ARM ARMV7 (OMAP3xx SoC)
diff --git a/MAKEALL b/MAKEALL
index c54c6e8..e0fe12f 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -412,6 +412,7 @@ LIST_ARM11=" \
LIST_ARMV7=" \
am3517_evm \
ca9x4_ct_vxp \
+ cm_t35 \
devkit8000 \
igep0020 \
igep0030 \
diff --git a/board/cm_t35/Makefile b/board/cm_t35/Makefile
new file mode 100644
index 0000000..320a817
--- /dev/null
+++ b/board/cm_t35/Makefile
@@ -0,0 +1,47 @@
+#
+# (C) Copyright 2000, 2001, 2002
+# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS := cm_t35.o
+
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+ rm -f $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
diff --git a/board/cm_t35/cm_t35.c b/board/cm_t35/cm_t35.c
new file mode 100644
index 0000000..21e8762
--- /dev/null
+++ b/board/cm_t35/cm_t35.c
@@ -0,0 +1,222 @@
+/*
+ * (C) Copyright 2010
+ * CompuLab, Ltd. <www.compulab.co.il>
+ *
+ * Author: Mike Rapoport <mike@compulab.co.il>
+ *
+ * Derived from omap3evm and Beagle Board by
+ * Manikandan Pillai <mani.pillai@ti.com>
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Syed Mohammed Khasim <x0khasim@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <netdev.h>
+#include <net.h>
+#include <i2c.h>
+#include <twl4030.h>
+
+#include <asm/io.h>
+#include <asm/arch/mem.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/mach-types.h>
+
+#include "cm_t35.h"
+
+static u32 gpmc_net_config[GPMC_MAX_REG] = {
+ NET_GPMC_CONFIG1,
+ NET_GPMC_CONFIG2,
+ NET_GPMC_CONFIG3,
+ NET_GPMC_CONFIG4,
+ NET_GPMC_CONFIG5,
+ NET_GPMC_CONFIG6,
+ 0
+};
+
+static u32 gpmc_nand_config[GPMC_MAX_REG] = {
+ SMNAND_GPMC_CONFIG1,
+ SMNAND_GPMC_CONFIG2,
+ SMNAND_GPMC_CONFIG3,
+ SMNAND_GPMC_CONFIG4,
+ SMNAND_GPMC_CONFIG5,
+ SMNAND_GPMC_CONFIG6,
+ 0,
+};
+
+/*
+ * Routine: board_init
+ * Description: Early hardware init.
+ */
+int board_init(void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
+
+ enable_gpmc_cs_config(gpmc_nand_config, &gpmc_cfg->cs[0],
+ CONFIG_SYS_NAND_BASE, GPMC_SIZE_16M);
+
+ /* board id for Linux */
+ gd->bd->bi_arch_number = MACH_TYPE_CM_T35;
+ /* boot param addr */
+ gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
+
+ return 0;
+}
+
+/*
+ * Routine: misc_init_r
+ * Description: Init ethernet (done here so udelay works)
+ */
+int misc_init_r(void)
+{
+#ifdef CONFIG_DRIVER_OMAP34XX_I2C
+ i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+#endif
+
+ dieid_num_r();
+
+ return 0;
+}
+
+/*
+ * Routine: set_muxconf_regs
+ * Description: Setting up the configuration Mux registers specific to the
+ * hardware. Many pins need to be moved from protect to primary
+ * mode.
+ */
+void set_muxconf_regs(void)
+{
+ MUX_CM_T35();
+}
+
+#ifdef CONFIG_GENERIC_MMC
+int board_mmc_init(bd_t *bis)
+{
+ omap_mmc_init(0);
+ return 0;
+}
+#endif
+
+/*
+ * Routine: setup_net_chip_gmpc
+ * Description: Setting up the configuration GPMC registers specific to the
+ * Ethernet hardware.
+ */
+static void setup_net_chip_gmpc(void)
+{
+ struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE;
+
+ enable_gpmc_cs_config(gpmc_net_config, &gpmc_cfg->cs[5],
+ CM_T35_SMC911X_BASE, GPMC_SIZE_16M);
+ enable_gpmc_cs_config(gpmc_net_config, &gpmc_cfg->cs[4],
+ SB_T35_SMC911X_BASE, GPMC_SIZE_16M);
+
+ /* Enable off mode for NWE in PADCONF_GPMC_NWE register */
+ writew(readw(&ctrl_base->gpmc_nwe) | 0x0E00, &ctrl_base->gpmc_nwe);
+
+ /* Enable off mode for NOE in PADCONF_GPMC_NADV_ALE register */
+ writew(readw(&ctrl_base->gpmc_noe) | 0x0E00, &ctrl_base->gpmc_noe);
+
+ /* Enable off mode for ALE in PADCONF_GPMC_NADV_ALE register */
+ writew(readw(&ctrl_base->gpmc_nadv_ale) | 0x0E00,
+ &ctrl_base->gpmc_nadv_ale);
+}
+
+#ifdef CONFIG_DRIVER_OMAP34XX_I2C
+/*
+ * Routine: reset_net_chip
+ * Description: reset the Ethernet controller via TPS65930 GPIO
+ */
+static void reset_net_chip(void)
+{
+ /* Set GPIO1 of TPS65930 as output */
+ twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, 0x02,
+ TWL4030_BASEADD_GPIO+0x03);
+ /* Send a pulse on the GPIO pin */
+ twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, 0x02,
+ TWL4030_BASEADD_GPIO+0x0C);
+ udelay(1);
+ twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, 0x02,
+ TWL4030_BASEADD_GPIO+0x09);
+ udelay(1);
+ twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, 0x02,
+ TWL4030_BASEADD_GPIO+0x0C);
+}
+#else
+static inline void reset_net_chip(void) {}
+#endif
+
+/*
+ * Routine: handle_mac_address
+ * Description: prepare MAC address for on-board Ethernet.
+ */
+static int handle_mac_address(void)
+{
+ unsigned char enetaddr[6];
+ int rc;
+
+ memset(enetaddr, 0, 6);
+ rc = eth_getenv_enetaddr("ethaddr", enetaddr);
+ if (rc)
+ return 0;
+
+#ifdef CONFIG_DRIVER_OMAP34XX_I2C
+ rc = i2c_read(0x50, 0, 1, enetaddr, 6);
+ if (rc)
+ return rc;
+#endif
+
+ if (!is_valid_ether_addr(enetaddr))
+ return -1;
+
+ return eth_setenv_enetaddr("ethaddr", enetaddr);
+}
+
+
+/*
+ * Routine: board_eth_init
+ * Description: initialize module and base-board Ethernet chips
+ */
+int board_eth_init(bd_t *bis)
+{
+ int rc = 0, rc1 = 0;
+
+#ifdef CONFIG_SMC911X
+ setup_net_chip_gmpc();
+ reset_net_chip();
+
+ rc1 = handle_mac_address();
+ if (rc1)
+ printf("CM-T35: No MAC address found\n");
+
+ rc1 = smc911x_initialize(0, CM_T35_SMC911X_BASE);
+ if (rc1 > 0)
+ rc++;
+
+ rc1 = smc911x_initialize(1, SB_T35_SMC911X_BASE);
+ if (rc1 > 0)
+ rc++;
+#endif
+
+ return rc;
+}
diff --git a/board/cm_t35/cm_t35.h b/board/cm_t35/cm_t35.h
new file mode 100644
index 0000000..514017d
--- /dev/null
+++ b/board/cm_t35/cm_t35.h
@@ -0,0 +1,184 @@
+/*
+ * (C) Copyright 2010 CompuLab, Ltd
+ * Author: Mike Rapoport <mike@compulab.co.il>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef _CM_T35_H_
+#define _CM_T35_H_
+
+const omap3_sysinfo sysinfo = {
+ DDR_DISCRETE,
+ "CM-T35 board",
+ "NAND",
+};
+
+/* static void setup_net_chip(void); */
+
+/*
+ * IEN - Input Enable
+ * IDIS - Input Disable
+ * PTD - Pull type Down
+ * PTU - Pull type Up
+ * DIS - Pull type selection is inactive
+ * EN - Pull type selection is active
+ * M0 - Mode 0
+ * The commented string gives the final mux configuration for that pin
+ */
+#define MUX_CM_T35() \
+ /*SDRC*/\
+ MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)) /*SDRC_D0*/\
+ MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0)) /*SDRC_D1*/\
+ MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0)) /*SDRC_D2*/\
+ MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0)) /*SDRC_D3*/\
+ MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0)) /*SDRC_D4*/\
+ MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0)) /*SDRC_D5*/\
+ MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0)) /*SDRC_D6*/\
+ MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0)) /*SDRC_D7*/\
+ MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0)) /*SDRC_D8*/\
+ MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0)) /*SDRC_D9*/\
+ MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0)) /*SDRC_D10*/\
+ MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0)) /*SDRC_D11*/\
+ MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0)) /*SDRC_D12*/\
+ MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0)) /*SDRC_D13*/\
+ MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0)) /*SDRC_D14*/\
+ MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0)) /*SDRC_D15*/\
+ MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0)) /*SDRC_D16*/\
+ MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0)) /*SDRC_D17*/\
+ MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0)) /*SDRC_D18*/\
+ MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0)) /*SDRC_D19*/\
+ MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0)) /*SDRC_D20*/\
+ MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0)) /*SDRC_D21*/\
+ MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0)) /*SDRC_D22*/\
+ MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0)) /*SDRC_D23*/\
+ MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0)) /*SDRC_D24*/\
+ MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0)) /*SDRC_D25*/\
+ MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0)) /*SDRC_D26*/\
+ MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0)) /*SDRC_D27*/\
+ MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0)) /*SDRC_D28*/\
+ MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0)) /*SDRC_D29*/\
+ MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0)) /*SDRC_D30*/\
+ MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0)) /*SDRC_D31*/\
+ MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0)) /*SDRC_CLK*/\
+ MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0)) /*SDRC_DQS0*/\
+ MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0)) /*SDRC_DQS1*/\
+ MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0)) /*SDRC_DQS2*/\
+ MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0)) /*SDRC_DQS3*/\
+ /*GPMC*/\
+ MUX_VAL(CP(GPMC_A1), (IDIS | PTU | EN | M0)) /*GPMC_A1*/\
+ MUX_VAL(CP(GPMC_A2), (IDIS | PTU | EN | M0)) /*GPMC_A2*/\
+ MUX_VAL(CP(GPMC_A3), (IDIS | PTU | EN | M0)) /*GPMC_A3*/\
+ MUX_VAL(CP(GPMC_A4), (IDIS | PTU | EN | M0)) /*GPMC_A4*/\
+ MUX_VAL(CP(GPMC_A5), (IDIS | PTU | EN | M0)) /*GPMC_A5*/\
+ MUX_VAL(CP(GPMC_A6), (IDIS | PTU | EN | M0)) /*GPMC_A6*/\
+ MUX_VAL(CP(GPMC_A7), (IDIS | PTU | EN | M0)) /*GPMC_A7*/\
+ MUX_VAL(CP(GPMC_A8), (IDIS | PTU | EN | M0)) /*GPMC_A8*/\
+ MUX_VAL(CP(GPMC_A9), (IDIS | PTU | EN | M0)) /*GPMC_A9*/\
+ MUX_VAL(CP(GPMC_A10), (IDIS | PTU | EN | M0)) /*GPMC_A10*/\
+ MUX_VAL(CP(GPMC_D0), (IEN | PTU | EN | M0)) /*GPMC_D0*/\
+ MUX_VAL(CP(GPMC_D1), (IEN | PTU | EN | M0)) /*GPMC_D1*/\
+ MUX_VAL(CP(GPMC_D2), (IEN | PTU | EN | M0)) /*GPMC_D2*/\
+ MUX_VAL(CP(GPMC_D3), (IEN | PTU | EN | M0)) /*GPMC_D3*/\
+ MUX_VAL(CP(GPMC_D4), (IEN | PTU | EN | M0)) /*GPMC_D4*/\
+ MUX_VAL(CP(GPMC_D5), (IEN | PTU | EN | M0)) /*GPMC_D5*/\
+ MUX_VAL(CP(GPMC_D6), (IEN | PTU | EN | M0)) /*GPMC_D6*/\
+ MUX_VAL(CP(GPMC_D7), (IEN | PTU | EN | M0)) /*GPMC_D7*/\
+ MUX_VAL(CP(GPMC_D8), (IEN | PTU | EN | M0)) /*GPMC_D8*/\
+ MUX_VAL(CP(GPMC_D9), (IEN | PTU | EN | M0)) /*GPMC_D9*/\
+ MUX_VAL(CP(GPMC_D10), (IEN | PTU | EN | M0)) /*GPMC_D10*/\
+ MUX_VAL(CP(GPMC_D11), (IEN | PTU | EN | M0)) /*GPMC_D11*/\
+ MUX_VAL(CP(GPMC_D12), (IEN | PTU | EN | M0)) /*GPMC_D12*/\
+ MUX_VAL(CP(GPMC_D13), (IEN | PTU | EN | M0)) /*GPMC_D13*/\
+ MUX_VAL(CP(GPMC_D14), (IEN | PTU | EN | M0)) /*GPMC_D14*/\
+ MUX_VAL(CP(GPMC_D15), (IEN | PTU | EN | M0)) /*GPMC_D15*/\
+ MUX_VAL(CP(GPMC_NCS0), (IDIS | PTU | EN | M0)) /*GPMC_nCS0*/\
+ /* SB-T35 Ethernet */\
+ MUX_VAL(CP(GPMC_NCS4), (IEN | PTU | EN | M0)) /*GPMC_nCS4*/\
+ /* CM-T35 Ethernet */\
+ MUX_VAL(CP(GPMC_NCS5), (IDIS | PTU | DIS | M0)) /*GPMC_nCS5*/\
+ MUX_VAL(CP(GPMC_CLK), (IEN | PTD | DIS | M4)) /*GPIO_59*/\
+ MUX_VAL(CP(GPMC_NADV_ALE), (IDIS | PTD | DIS | M0)) /*nADV_ALE*/\
+ MUX_VAL(CP(GPMC_NOE), (IDIS | PTD | DIS | M0)) /*nOE*/\
+ MUX_VAL(CP(GPMC_NWE), (IDIS | PTD | DIS | M0)) /*nWE*/\
+ MUX_VAL(CP(GPMC_NBE0_CLE), (IDIS | PTU | EN | M0)) /*nBE0_CLE*/\
+ MUX_VAL(CP(GPMC_NBE1), (IDIS | PTD | DIS | M4)) /*GPIO_61*/\
+ MUX_VAL(CP(GPMC_NWP), (IEN | PTD | DIS | M0)) /*nWP*/\
+ MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0)) /*WAIT0*/\
+ /*DSS*/\
+ MUX_VAL(CP(DSS_PCLK), (IDIS | PTD | DIS | M0)) /*DSS_PCLK*/\
+ MUX_VAL(CP(DSS_HSYNC), (IDIS | PTD | DIS | M0)) /*DSS_HSYNC*/\
+ MUX_VAL(CP(DSS_VSYNC), (IDIS | PTD | DIS | M0)) /*DSS_VSYNC*/\
+ MUX_VAL(CP(DSS_ACBIAS), (IDIS | PTD | DIS | M0)) /*DSS_ACBIAS*/\
+ MUX_VAL(CP(DSS_DATA0), (IDIS | PTD | DIS | M0)) /*DSS_DATA0*/\
+ MUX_VAL(CP(DSS_DATA1), (IDIS | PTD | DIS | M0)) /*DSS_DATA1*/\
+ MUX_VAL(CP(DSS_DATA2), (IDIS | PTD | DIS | M0)) /*DSS_DATA2*/\
+ MUX_VAL(CP(DSS_DATA3), (IDIS | PTD | DIS | M0)) /*DSS_DATA3*/\
+ MUX_VAL(CP(DSS_DATA4), (IDIS | PTD | DIS | M0)) /*DSS_DATA4*/\
+ MUX_VAL(CP(DSS_DATA5), (IDIS | PTD | DIS | M0)) /*DSS_DATA5*/\
+ MUX_VAL(CP(DSS_DATA6), (IDIS | PTD | DIS | M0)) /*DSS_DATA6*/\
+ MUX_VAL(CP(DSS_DATA7), (IDIS | PTD | DIS | M0)) /*DSS_DATA7*/\
+ MUX_VAL(CP(DSS_DATA8), (IDIS | PTD | DIS | M0)) /*DSS_DATA8*/\
+ MUX_VAL(CP(DSS_DATA9), (IDIS | PTD | DIS | M0)) /*DSS_DATA9*/\
+ MUX_VAL(CP(DSS_DATA10), (IDIS | PTD | DIS | M0)) /*DSS_DATA10*/\
+ MUX_VAL(CP(DSS_DATA11), (IDIS | PTD | DIS | M0)) /*DSS_DATA11*/\
+ MUX_VAL(CP(DSS_DATA12), (IDIS | PTD | DIS | M0)) /*DSS_DATA12*/\
+ MUX_VAL(CP(DSS_DATA13), (IDIS | PTD | DIS | M0)) /*DSS_DATA13*/\
+ MUX_VAL(CP(DSS_DATA14), (IDIS | PTD | DIS | M0)) /*DSS_DATA14*/\
+ MUX_VAL(CP(DSS_DATA15), (IDIS | PTD | DIS | M0)) /*DSS_DATA15*/\
+ MUX_VAL(CP(DSS_DATA16), (IDIS | PTD | DIS | M0)) /*DSS_DATA16*/\
+ MUX_VAL(CP(DSS_DATA17), (IDIS | PTD | DIS | M0)) /*DSS_DATA17*/\
+ MUX_VAL(CP(DSS_DATA18), (IDIS | PTD | DIS | M0)) /*DSS_DATA18*/\
+ MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M0)) /*DSS_DATA19*/\
+ MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M0)) /*DSS_DATA20*/\
+ MUX_VAL(CP(DSS_DATA21), (IDIS | PTD | DIS | M0)) /*DSS_DATA21*/\
+ MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M0)) /*DSS_DATA22*/\
+ MUX_VAL(CP(DSS_DATA23), (IDIS | PTD | DIS | M0)) /*DSS_DATA23*/\
+ /*Serial Interface*/\
+ MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTD | DIS | M0)) /*UART3_RX*/\
+ MUX_VAL(CP(UART3_TX_IRTX), (IDIS | PTD | DIS | M0)) /*UART3_TX*/\
+ /* mUSB */\
+ MUX_VAL(CP(HSUSB0_CLK), (IEN | PTD | DIS | M0)) /*HSUSB0_CLK*/\
+ MUX_VAL(CP(HSUSB0_STP), (IDIS | PTU | EN | M0)) /*HSUSB0_STP*/\
+ MUX_VAL(CP(HSUSB0_DIR), (IEN | PTD | DIS | M0)) /*HSUSB0_DIR*/\
+ MUX_VAL(CP(HSUSB0_NXT), (IEN | PTD | DIS | M0)) /*HSUSB0_NXT*/\
+ MUX_VAL(CP(HSUSB0_DATA0), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA0*/\
+ MUX_VAL(CP(HSUSB0_DATA1), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA1*/\
+ MUX_VAL(CP(HSUSB0_DATA2), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA2*/\
+ MUX_VAL(CP(HSUSB0_DATA3), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA3*/\
+ MUX_VAL(CP(HSUSB0_DATA4), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA4*/\
+ MUX_VAL(CP(HSUSB0_DATA5), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA5*/\
+ MUX_VAL(CP(HSUSB0_DATA6), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA6*/\
+ MUX_VAL(CP(HSUSB0_DATA7), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA7*/\
+ MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0)) /*I2C1_SCL*/\
+ MUX_VAL(CP(I2C1_SDA), (IEN | PTU | EN | M0)) /*I2C1_SDA*/\
+ /*Control and debug */\
+ MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0)) /*SYS_32K*/\
+ MUX_VAL(CP(SYS_CLKREQ), (IEN | PTD | DIS | M0)) /*SYS_CLKREQ*/\
+ MUX_VAL(CP(SYS_NIRQ), (IEN | PTU | EN | M0)) /*SYS_nIRQ*/\
+ MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0)) /*OFF_MODE*/\
+ MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M0)) /*CLKOUT1*/\
+ MUX_VAL(CP(SYS_CLKOUT2), (IDIS | PTD | DIS | M4)) /*green LED*/\
+ MUX_VAL(CP(JTAG_nTRST), (IEN | PTD | DIS | M0)) /*JTAG_nTRST*/\
+ MUX_VAL(CP(JTAG_TCK), (IEN | PTD | DIS | M0)) /*JTAG_TCK*/\
+ MUX_VAL(CP(JTAG_TMS), (IEN | PTD | DIS | M0)) /*JTAG_TMS*/\
+ MUX_VAL(CP(JTAG_TDI), (IEN | PTD | DIS | M0)) /*JTAG_TDI*/\
+ MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0)) /*sdrc_cke0*/\
+ MUX_VAL(CP(SDRC_CKE1), (IDIS | PTD | DIS | M7)) /*sdrc_cke1*/\
+
+#endif
diff --git a/board/cm_t35/config.mk b/board/cm_t35/config.mk
new file mode 100644
index 0000000..e81e283
--- /dev/null
+++ b/board/cm_t35/config.mk
@@ -0,0 +1,30 @@
+#
+# (C) Copyright 2009
+# CompuLab, Ltd., <www.compulab.co.il>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+# Physical Address:
+# 8000'0000 (bank0)
+#
+# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
+# (mem base + reserved)
+
+# For use with external or internal boots.
+CONFIG_SYS_TEXT_BASE = 0x80008000
diff --git a/boards.cfg b/boards.cfg
index 6c2a667..e79b2d7 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -392,6 +392,7 @@ igep0020 arm armv7 igep0020 isee omap3
igep0030 arm armv7 igep0030 isee omap3
am3517_evm arm armv7 am3517evm logicpd omap3
devkit8000 arm armv7 devkit8000 timll omap3
+cm_t35 arm armv7 cm_t35 - omap3
omap4_panda arm armv7 panda ti omap4
omap4_sdp4430 arm armv7 sdp4430 ti omap4
s5p_goni arm armv7 goni samsung s5pc1xx
diff --git a/doc/README.omap3 b/doc/README.omap3
index 6227151..460950d 100644
--- a/doc/README.omap3
+++ b/doc/README.omap3
@@ -21,6 +21,8 @@ Currently the following boards are supported:
* TI/Logic PD Zoom 2 [7]
+* CompuLab Ltd. CM-T35 [8]
+
Toolchain
=========
@@ -61,6 +63,11 @@ make
make omap3_zoom2_config
make
+* CM-T35:
+
+make cm_t35_config
+make
+
Custom commands
===============
@@ -119,7 +126,7 @@ To read a bit :
Acknowledgements
================
-OMAP3 U-Boot is based on U-Boot tar ball [8] for BeagleBoard and EVM done by
+OMAP3 U-Boot is based on U-Boot tar ball [9] for BeagleBoard and EVM done by
several TI employees.
Links
@@ -153,6 +160,11 @@ http://www.logicpd.com/products/devkit/ti/zoom_mobile_development_kit
[7] TI/Logic PD Zoom 2
http://www.logicpd.com/sites/default/files/1012659A_Zoom_OMAP34x-II_MDP_Brief.pdf
-[8] TI OMAP3 U-Boot:
+
+[8] CompuLab Ltd. CM-T35:
+
+http://www.compulab.co.il/t3530/html/t3530-cm-datasheet.htm
+
+[9] TI OMAP3 U-Boot:
http://beagleboard.googlecode.com/files/u-boot_beagle_revb.tar.gz
diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h
new file mode 100644
index 0000000..63a4938
--- /dev/null
+++ b/include/configs/cm_t35.h
@@ -0,0 +1,364 @@
+/*
+ * (C) Copyright 2006-2008
+ * Texas Instruments.
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Syed Mohammed Khasim <x0khasim@ti.com>
+ *
+ * Configuration settings for the TI OMAP3530 Beagle board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_ARMV7 1 /* This is an ARM V7 CPU core */
+#define CONFIG_OMAP 1 /* in a TI OMAP core */
+#define CONFIG_OMAP34XX 1 /* which is a 34XX */
+#define CONFIG_OMAP3430 1 /* which is in a 3430 */
+#define CONFIG_CM_T35 1 /* working with CM-T35 */
+
+#define CONFIG_SDRC /* The chip has SDRC controller */
+
+#include <asm/arch/cpu.h> /* get chip and board defs */
+#include <asm/arch/omap3.h>
+
+/*
+ * Display CPU and Board information
+ */
+#define CONFIG_DISPLAY_CPUINFO 1
+#define CONFIG_DISPLAY_BOARDINFO 1
+
+/* Clock Defines */
+#define V_OSCK 26000000 /* Clock output from T2 */
+#define V_SCLK (V_OSCK >> 1)
+
+#undef CONFIG_USE_IRQ /* no support for IRQs */
+#define CONFIG_MISC_INIT_R
+
+#define CONFIG_OF_LIBFDT 1
+/*
+ * The early kernel mapping on ARM currently only maps from the base of DRAM
+ * to the end of the kernel image. The kernel is loaded at DRAM base + 0x8000.
+ * The early kernel pagetable uses DRAM base + 0x4000 to DRAM base + 0x8000,
+ * so that leaves DRAM base to DRAM base + 0x4000 available.
+ */
+#define CONFIG_SYS_BOOTMAPSZ 0x4000
+
+#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS 1
+#define CONFIG_INITRD_TAG 1
+#define CONFIG_REVISION_TAG 1
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */
+ /* Sector */
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10))
+ /* initial data */
+
+/*
+ * Hardware drivers
+ */
+
+/*
+ * NS16550 Configuration
+ */
+#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */
+
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE (-4)
+#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
+
+/*
+ * select serial console configuration
+ */
+#define CONFIG_CONS_INDEX 3
+#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3
+#define CONFIG_SERIAL3 3 /* UART3 on Beagle Rev 2 */
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
+ 115200}
+#define CONFIG_GENERIC_MMC 1
+#define CONFIG_MMC 1
+#define CONFIG_OMAP_HSMMC 1
+#define CONFIG_DOS_PARTITION 1
+
+/* DDR - I use Micron DDR */
+#define CONFIG_OMAP3_MICRON_DDR 1
+
+/* USB */
+#define CONFIG_MUSB_UDC 1
+#define CONFIG_USB_OMAP3 1
+#define CONFIG_TWL4030_USB 1
+
+/* USB device configuration */
+#define CONFIG_USB_DEVICE 1
+#define CONFIG_USB_TTY 1
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
+
+/* commands to include */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_EXT2 /* EXT2 Support */
+#define CONFIG_CMD_FAT /* FAT support */
+#define CONFIG_CMD_JFFS2 /* JFFS2 Support */
+#define CONFIG_CMD_MTDPARTS /* Enable MTD parts commands */
+#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
+#define MTDIDS_DEFAULT "nand0=nand"
+#define MTDPARTS_DEFAULT "mtdparts=nand:512k(x-loader),"\
+ "1920k(u-boot),128k(u-boot-env),"\
+ "4m(kernel),-(fs)"
+
+#define CONFIG_CMD_I2C /* I2C serial bus support */
+#define CONFIG_CMD_MMC /* MMC support */
+#define CONFIG_CMD_NAND /* NAND support */
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PING
+
+#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */
+#undef CONFIG_CMD_FPGA /* FPGA configuration Support */
+#undef CONFIG_CMD_IMI /* iminfo */
+#undef CONFIG_CMD_IMLS /* List all found images */
+
+#define CONFIG_SYS_NO_FLASH
+#define CONFIG_HARD_I2C 1
+#define CONFIG_SYS_I2C_SPEED 100000
+#define CONFIG_SYS_I2C_SLAVE 1
+#define CONFIG_SYS_I2C_BUS 0
+#define CONFIG_SYS_I2C_BUS_SELECT 1
+#define CONFIG_DRIVER_OMAP34XX_I2C 1
+
+/*
+ * TWL4030
+ */
+#define CONFIG_TWL4030_POWER 1
+#define CONFIG_TWL4030_LED 1
+
+/*
+ * Board NAND Info.
+ */
+#define CONFIG_SYS_NAND_QUIET_TEST 1
+#define CONFIG_NAND_OMAP_GPMC
+#define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */
+ /* to access nand */
+#define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */
+ /* to access nand at */
+ /* CS0 */
+#define GPMC_NAND_ECC_LP_x16_LAYOUT 1
+
+#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */
+ /* devices */
+#define CONFIG_JFFS2_NAND
+/* nand device jffs2 lives on */
+#define CONFIG_JFFS2_DEV "nand0"
+/* start of jffs2 partition */
+#define CONFIG_JFFS2_PART_OFFSET 0x680000
+#define CONFIG_JFFS2_PART_SIZE 0xf980000 /* size of jffs2 */
+ /* partition */
+
+/* Environment information */
+#define CONFIG_BOOTDELAY 10
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "loadaddr=0x82000000\0" \
+ "usbtty=cdc_acm\0" \
+ "console=ttyS2,115200n8\0" \
+ "mpurate=500\0" \
+ "vram=12M\0" \
+ "dvimode=1024x768MR-16 at 60\0" \
+ "defaultdisplay=dvi\0" \
+ "mmcdev=0\0" \
+ "mmcroot=/dev/mmcblk0p2 rw\0" \
+ "mmcrootfstype=ext3 rootwait\0" \
+ "nandroot=/dev/mtdblock4 rw\0" \
+ "nandrootfstype=jffs2\0" \
+ "mmcargs=setenv bootargs console=${console} " \
+ "mpurate=${mpurate} " \
+ "vram=${vram} " \
+ "omapfb.mode=dvi:${dvimode} " \
+ "omapfb.debug=y " \
+ "omapdss.def_disp=${defaultdisplay} " \
+ "root=${mmcroot} " \
+ "rootfstype=${mmcrootfstype}\0" \
+ "nandargs=setenv bootargs console=${console} " \
+ "mpurate=${mpurate} " \
+ "vram=${vram} " \
+ "omapfb.mode=dvi:${dvimode} " \
+ "omapfb.debug=y " \
+ "omapdss.def_disp=${defaultdisplay} " \
+ "root=${nandroot} " \
+ "rootfstype=${nandrootfstype}\0" \
+ "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
+ "bootscript=echo Running bootscript from mmc ...; " \
+ "source ${loadaddr}\0" \
+ "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
+ "mmcboot=echo Booting from mmc ...; " \
+ "run mmcargs; " \
+ "bootm ${loadaddr}\0" \
+ "nandboot=echo Booting from nand ...; " \
+ "run nandargs; " \
+ "nand read ${loadaddr} 280000 400000; " \
+ "bootm ${loadaddr}\0" \
+
+#define CONFIG_BOOTCOMMAND \
+ "if mmc rescan ${mmcdev}; then " \
+ "if run loadbootscript; then " \
+ "run bootscript; " \
+ "else " \
+ "if run loaduimage; then " \
+ "run mmcboot; " \
+ "else run nandboot; " \
+ "fi; " \
+ "fi; " \
+ "else run nandboot; fi"
+
+#define CONFIG_AUTO_COMPLETE 1
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+#define CONFIG_SYS_PROMPT "CM-T35 # "
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
+
+#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) /* memtest */
+ /* works on */
+#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \
+ 0x01F00000) /* 31MB */
+
+#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default */
+ /* load address */
+
+/*
+ * OMAP3 has 12 GP timers, they can be driven by the system clock
+ * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
+ * This rate is divided by a local divisor.
+ */
+#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2)
+#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
+#define CONFIG_SYS_HZ 1000
+
+/*-----------------------------------------------------------------------
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */
+#ifdef CONFIG_USE_IRQ
+#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack 4 KiB */
+#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack 4 KiB */
+#endif
+
+/*-----------------------------------------------------------------------
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS 1 /* CS1 is never populated */
+#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0
+#define PHYS_SDRAM_1_SIZE (32 << 20) /* at least 32 MiB */
+
+/* SDRAM Bank Allocation method */
+#define SDRC_R_B_C 1
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+
+/* **** PISMO SUPPORT *** */
+
+/* Configure the PISMO */
+#define PISMO1_NAND_SIZE GPMC_SIZE_128M
+#define PISMO1_ONEN_SIZE GPMC_SIZE_128M
+
+#define CONFIG_SYS_MAX_FLASH_SECT 520 /* max number of sectors on */
+ /* one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */
+#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */
+
+#define CONFIG_SYS_FLASH_BASE boot_flash_base
+
+/* Monitor@start of flash */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP
+
+#define CONFIG_ENV_IS_IN_NAND 1
+#define ONENAND_ENV_OFFSET 0x260000 /* environment starts here */
+#define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */
+
+#define CONFIG_SYS_ENV_SECT_SIZE boot_flash_sec
+#define CONFIG_ENV_OFFSET boot_flash_off
+#define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET
+
+/*-----------------------------------------------------------------------
+ * CFI FLASH driver setup
+ */
+/* timeout values are in ticks */
+#define CONFIG_SYS_FLASH_ERASE_TOUT (100 * CONFIG_SYS_HZ)
+#define CONFIG_SYS_FLASH_WRITE_TOUT (100 * CONFIG_SYS_HZ)
+
+/* Flash banks JFFS2 should use */
+#define CONFIG_SYS_MAX_MTD_BANKS (CONFIG_SYS_MAX_FLASH_BANKS + \
+ CONFIG_SYS_MAX_NAND_DEVICE)
+#define CONFIG_SYS_JFFS2_MEM_NAND
+/* use flash_info[2] */
+#define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS
+#define CONFIG_SYS_JFFS2_NUM_BANKS 1
+
+#ifndef __ASSEMBLY__
+extern unsigned int boot_flash_base;
+extern volatile unsigned int boot_flash_env_addr;
+extern unsigned int boot_flash_off;
+extern unsigned int boot_flash_sec;
+extern unsigned int boot_flash_type;
+#endif
+
+#if defined(CONFIG_CMD_NET)
+#define CONFIG_NET_MULTI
+#define CONFIG_SMC911X
+#define CONFIG_SMC911X_32_BIT
+#define CM_T35_SMC911X_BASE 0x2C000000
+#define SB_T35_SMC911X_BASE (CM_T35_SMC911X_BASE + (16 << 20))
+#define CONFIG_SMC911X_BASE CM_T35_SMC911X_BASE
+#endif /* (CONFIG_CMD_NET) */
+
+/* additions for new relocation code, must be added to all boards */
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
+#define CONFIG_SYS_INIT_RAM_SIZE 0x800
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_SIZE - \
+ GENERATED_GBL_DATA_SIZE)
+
+#endif /* __CONFIG_H */
--
1.7.3.1
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [U-Boot] [PATCH] OMAP3: add CM-T35 board
2010-11-23 7:29 [U-Boot] [PATCH] OMAP3: " Mike Rapoport
@ 2010-11-24 2:58 ` Nishanth Menon
2010-11-25 16:29 ` Paulraj, Sandeep
2010-11-28 7:56 ` Mike Rapoport
0 siblings, 2 replies; 13+ messages in thread
From: Nishanth Menon @ 2010-11-24 2:58 UTC (permalink / raw)
To: u-boot
Mike Rapoport wrote, on 11/23/2010 01:29 AM:
minor comments follow:
[...]
> diff --git a/board/cm_t35/cm_t35.h b/board/cm_t35/cm_t35.h
> new file mode 100644
> index 0000000..514017d
> --- /dev/null
> +++ b/board/cm_t35/cm_t35.h
[..]
> + /*DSS*/\
> + MUX_VAL(CP(DSS_PCLK), (IDIS | PTD | DIS | M0)) /*DSS_PCLK*/\
> + MUX_VAL(CP(DSS_HSYNC), (IDIS | PTD | DIS | M0)) /*DSS_HSYNC*/\
> + MUX_VAL(CP(DSS_VSYNC), (IDIS | PTD | DIS | M0)) /*DSS_VSYNC*/\
> + MUX_VAL(CP(DSS_ACBIAS), (IDIS | PTD | DIS | M0)) /*DSS_ACBIAS*/\
> + MUX_VAL(CP(DSS_DATA0), (IDIS | PTD | DIS | M0)) /*DSS_DATA0*/\
> + MUX_VAL(CP(DSS_DATA1), (IDIS | PTD | DIS | M0)) /*DSS_DATA1*/\
> + MUX_VAL(CP(DSS_DATA2), (IDIS | PTD | DIS | M0)) /*DSS_DATA2*/\
> + MUX_VAL(CP(DSS_DATA3), (IDIS | PTD | DIS | M0)) /*DSS_DATA3*/\
> + MUX_VAL(CP(DSS_DATA4), (IDIS | PTD | DIS | M0)) /*DSS_DATA4*/\
> + MUX_VAL(CP(DSS_DATA5), (IDIS | PTD | DIS | M0)) /*DSS_DATA5*/\
> + MUX_VAL(CP(DSS_DATA6), (IDIS | PTD | DIS | M0)) /*DSS_DATA6*/\
> + MUX_VAL(CP(DSS_DATA7), (IDIS | PTD | DIS | M0)) /*DSS_DATA7*/\
> + MUX_VAL(CP(DSS_DATA8), (IDIS | PTD | DIS | M0)) /*DSS_DATA8*/\
> + MUX_VAL(CP(DSS_DATA9), (IDIS | PTD | DIS | M0)) /*DSS_DATA9*/\
> + MUX_VAL(CP(DSS_DATA10), (IDIS | PTD | DIS | M0)) /*DSS_DATA10*/\
> + MUX_VAL(CP(DSS_DATA11), (IDIS | PTD | DIS | M0)) /*DSS_DATA11*/\
> + MUX_VAL(CP(DSS_DATA12), (IDIS | PTD | DIS | M0)) /*DSS_DATA12*/\
> + MUX_VAL(CP(DSS_DATA13), (IDIS | PTD | DIS | M0)) /*DSS_DATA13*/\
> + MUX_VAL(CP(DSS_DATA14), (IDIS | PTD | DIS | M0)) /*DSS_DATA14*/\
> + MUX_VAL(CP(DSS_DATA15), (IDIS | PTD | DIS | M0)) /*DSS_DATA15*/\
> + MUX_VAL(CP(DSS_DATA16), (IDIS | PTD | DIS | M0)) /*DSS_DATA16*/\
> + MUX_VAL(CP(DSS_DATA17), (IDIS | PTD | DIS | M0)) /*DSS_DATA17*/\
> + MUX_VAL(CP(DSS_DATA18), (IDIS | PTD | DIS | M0)) /*DSS_DATA18*/\
> + MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M0)) /*DSS_DATA19*/\
> + MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M0)) /*DSS_DATA20*/\
> + MUX_VAL(CP(DSS_DATA21), (IDIS | PTD | DIS | M0)) /*DSS_DATA21*/\
> + MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M0)) /*DSS_DATA22*/\
> + MUX_VAL(CP(DSS_DATA23), (IDIS | PTD | DIS | M0)) /*DSS_DATA23*/\
Are you using bootlogo in CM-t35 u-boot?
> + MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M0)) /*CLKOUT1*/\
> + MUX_VAL(CP(SYS_CLKOUT2), (IDIS | PTD | DIS | M4)) /*green LED*/\
might be better to state which GPIO than green led :)
> + MUX_VAL(CP(JTAG_nTRST), (IEN | PTD | DIS | M0)) /*JTAG_nTRST*/\
> + MUX_VAL(CP(JTAG_TCK), (IEN | PTD | DIS | M0)) /*JTAG_TCK*/\
> + MUX_VAL(CP(JTAG_TMS), (IEN | PTD | DIS | M0)) /*JTAG_TMS*/\
> + MUX_VAL(CP(JTAG_TDI), (IEN | PTD | DIS | M0)) /*JTAG_TDI*/\
> + MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0)) /*sdrc_cke0*/\
> + MUX_VAL(CP(SDRC_CKE1), (IDIS | PTD | DIS | M7)) /*sdrc_cke1*/\
this tiny set probably should go along with sdrc to reflect proper
functional set I guess.
> +
> +#endif
> diff --git a/board/cm_t35/config.mk b/board/cm_t35/config.mk
> new file mode 100644
> index 0000000..e81e283
> --- /dev/null
> +++ b/board/cm_t35/config.mk
> @@ -0,0 +1,30 @@
> +#
> +# (C) Copyright 2009
> +# CompuLab, Ltd.,<www.compulab.co.il>
> +#
> +# See file CREDITS for list of people who contributed to this
> +# project.
> +#
> +# This program is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU General Public License as
> +# published by the Free Software Foundation; either version 2 of
> +# the License, or (at your option) any later version.
> +#
> +# This program is distributed in the hope that it will be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program; if not, write to the Free Software
> +# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> +# MA 02111-1307 USA
> +#
> +# Physical Address:
> +# 8000'0000 (bank0)
> +#
> +# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
> +# (mem base + reserved)
> +
> +# For use with external or internal boots.
> +CONFIG_SYS_TEXT_BASE = 0x80008000
> diff --git a/boards.cfg b/boards.cfg
> index 6c2a667..e79b2d7 100644
> --- a/boards.cfg
> +++ b/boards.cfg
> @@ -392,6 +392,7 @@ igep0020 arm armv7 igep0020 isee omap3
> igep0030 arm armv7 igep0030 isee omap3
> am3517_evm arm armv7 am3517evm logicpd omap3
> devkit8000 arm armv7 devkit8000 timll omap3
> +cm_t35 arm armv7 cm_t35 - omap3
> omap4_panda arm armv7 panda ti omap4
> omap4_sdp4430 arm armv7 sdp4430 ti omap4
> s5p_goni arm armv7 goni samsung s5pc1xx
> diff --git a/doc/README.omap3 b/doc/README.omap3
> index 6227151..460950d 100644
> --- a/doc/README.omap3
> +++ b/doc/README.omap3
> @@ -21,6 +21,8 @@ Currently the following boards are supported:
>
> * TI/Logic PD Zoom 2 [7]
>
> +* CompuLab Ltd. CM-T35 [8]
> +
> Toolchain
> =========
>
> @@ -61,6 +63,11 @@ make
> make omap3_zoom2_config
> make
>
> +* CM-T35:
> +
> +make cm_t35_config
> +make
> +
> Custom commands
> ===============
>
> @@ -119,7 +126,7 @@ To read a bit :
> Acknowledgements
> ================
>
> -OMAP3 U-Boot is based on U-Boot tar ball [8] for BeagleBoard and EVM done by
> +OMAP3 U-Boot is based on U-Boot tar ball [9] for BeagleBoard and EVM done by
> several TI employees.
>
> Links
> @@ -153,6 +160,11 @@ http://www.logicpd.com/products/devkit/ti/zoom_mobile_development_kit
> [7] TI/Logic PD Zoom 2
>
> http://www.logicpd.com/sites/default/files/1012659A_Zoom_OMAP34x-II_MDP_Brief.pdf
> -[8] TI OMAP3 U-Boot:
> +
> +[8] CompuLab Ltd. CM-T35:
> +
> +http://www.compulab.co.il/t3530/html/t3530-cm-datasheet.htm
> +
> +[9] TI OMAP3 U-Boot:
>
> http://beagleboard.googlecode.com/files/u-boot_beagle_revb.tar.gz
> diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h
> new file mode 100644
> index 0000000..63a4938
> --- /dev/null
> +++ b/include/configs/cm_t35.h
> @@ -0,0 +1,364 @@
> +/*
> + * (C) Copyright 2006-2008
> + * Texas Instruments.
> + * Richard Woodruff<r-woodruff2@ti.com>
> + * Syed Mohammed Khasim<x0khasim@ti.com>
> + *
2010 copyright?
> + * Configuration settings for the TI OMAP3530 Beagle board.
^^^^ need fixes..
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +#ifndef __CONFIG_H
> +#define __CONFIG_H
> +
> +/*
> + * High Level Configuration Options
[...]
--
Regards,
Nishanth Menon
^ permalink raw reply [flat|nested] 13+ messages in thread
* [U-Boot] [PATCH] OMAP3: add CM-T35 board
2010-11-24 2:58 ` Nishanth Menon
@ 2010-11-25 16:29 ` Paulraj, Sandeep
2010-11-28 7:56 ` Mike Rapoport
1 sibling, 0 replies; 13+ messages in thread
From: Paulraj, Sandeep @ 2010-11-25 16:29 UTC (permalink / raw)
To: u-boot
> Mike Rapoport wrote, on 11/23/2010 01:29 AM:
> minor comments follow:
> [...]
> > diff --git a/board/cm_t35/cm_t35.h b/board/cm_t35/cm_t35.h
> > new file mode 100644
> > index 0000000..514017d
> > --- /dev/null
> > +++ b/board/cm_t35/cm_t35.h
> [..]
> /*DSS_DATA22*/\
> > + MUX_VAL(CP(DSS_DATA23), (IDIS | PTD | DIS | M0))
> /*DSS_DATA23*/\
> Are you using bootlogo in CM-t35 u-boot?
>
>
> > + MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M0)) /*CLKOUT1*/\
> > + MUX_VAL(CP(SYS_CLKOUT2), (IDIS | PTD | DIS | M4)) /*green
> LED*/\
> might be better to state which GPIO than green led :)
>
> > + MUX_VAL(CP(JTAG_nTRST), (IEN | PTD | DIS | M0))
> /*JTAG_nTRST*/\
> > + MUX_VAL(CP(JTAG_TCK), (IEN | PTD | DIS | M0)) /*JTAG_TCK*/\
> > + MUX_VAL(CP(JTAG_TMS), (IEN | PTD | DIS | M0)) /*JTAG_TMS*/\
> > + MUX_VAL(CP(JTAG_TDI), (IEN | PTD | DIS | M0)) /*JTAG_TDI*/\
>
> > + MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0))
> /*sdrc_cke0*/\
> > + MUX_VAL(CP(SDRC_CKE1), (IDIS | PTD | DIS | M7))
> /*sdrc_cke1*/\
> this tiny set probably should go along with sdrc to reflect proper
> functional set I guess.
>
Mike can you respond to these comments from Nishanth?
I'd really like to add this 1 year old patch u-boot.
--Sandeep
^ permalink raw reply [flat|nested] 13+ messages in thread
* [U-Boot] [PATCH] OMAP3: add CM-T35 board
2010-11-24 2:58 ` Nishanth Menon
2010-11-25 16:29 ` Paulraj, Sandeep
@ 2010-11-28 7:56 ` Mike Rapoport
1 sibling, 0 replies; 13+ messages in thread
From: Mike Rapoport @ 2010-11-28 7:56 UTC (permalink / raw)
To: u-boot
Hi Nishanth,
Sorry for the delay, some deadly virus has caught me and I was not really
functional last week.
On 11/24/10 04:58, Nishanth Menon wrote:
> Mike Rapoport wrote, on 11/23/2010 01:29 AM:
> minor comments follow:
> [...]
> > diff --git a/board/cm_t35/cm_t35.h b/board/cm_t35/cm_t35.h
> > new file mode 100644
> > index 0000000..514017d
> > --- /dev/null
> > +++ b/board/cm_t35/cm_t35.h
> [..]
>> + /*DSS*/\
[ snip ]
>> + MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M0)) /*DSS_DATA19*/\
>> + MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M0)) /*DSS_DATA20*/\
>> + MUX_VAL(CP(DSS_DATA21), (IDIS | PTD | DIS | M0)) /*DSS_DATA21*/\
>> + MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M0)) /*DSS_DATA22*/\
>> + MUX_VAL(CP(DSS_DATA23), (IDIS | PTD | DIS | M0)) /*DSS_DATA23*/\
> Are you using bootlogo in CM-t35 u-boot?
Not at the moment, but we'd really like to add bootlogo support. AFAIK, some of
CM-T35 users already have the bootlogo support and therefore I'd prefer to have
the DSS pins configured.
>
>> + MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M0)) /*CLKOUT1*/\
>> + MUX_VAL(CP(SYS_CLKOUT2), (IDIS | PTD | DIS | M4)) /*green LED*/\
> might be better to state which GPIO than green led :)
The GPIO controlling the led is not available for other functionality, so I'd
prefer to keep the comment.
>> + MUX_VAL(CP(JTAG_nTRST), (IEN | PTD | DIS | M0)) /*JTAG_nTRST*/\
>> + MUX_VAL(CP(JTAG_TCK), (IEN | PTD | DIS | M0)) /*JTAG_TCK*/\
>> + MUX_VAL(CP(JTAG_TMS), (IEN | PTD | DIS | M0)) /*JTAG_TMS*/\
>> + MUX_VAL(CP(JTAG_TDI), (IEN | PTD | DIS | M0)) /*JTAG_TDI*/\
>
>> + MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0)) /*sdrc_cke0*/\
>> + MUX_VAL(CP(SDRC_CKE1), (IDIS | PTD | DIS | M7)) /*sdrc_cke1*/\
> this tiny set probably should go along with sdrc to reflect proper
> functional set I guess.
Agree
>> +
>> +#endif
>> diff --git a/board/cm_t35/config.mk b/board/cm_t35/config.mk
>> new file mode 100644
>> index 0000000..e81e283
>> --- /dev/null
>> +++ b/board/cm_t35/config.mk
>> @@ -0,0 +1,30 @@
>> +#
>> +# (C) Copyright 2009
>> +# CompuLab, Ltd.,<www.compulab.co.il>
>> +#
>> +# See file CREDITS for list of people who contributed to this
>> +# project.
>> +#
>> +# This program is free software; you can redistribute it and/or
>> +# modify it under the terms of the GNU General Public License as
>> +# published by the Free Software Foundation; either version 2 of
>> +# the License, or (at your option) any later version.
>> +#
>> +# This program is distributed in the hope that it will be useful,
>> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
>> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> +# GNU General Public License for more details.
>> +#
>> +# You should have received a copy of the GNU General Public License
>> +# along with this program; if not, write to the Free Software
>> +# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
>> +# MA 02111-1307 USA
>> +#
>> +# Physical Address:
>> +# 8000'0000 (bank0)
>> +#
>> +# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
>> +# (mem base + reserved)
>> +
>> +# For use with external or internal boots.
>> +CONFIG_SYS_TEXT_BASE = 0x80008000
>> diff --git a/boards.cfg b/boards.cfg
>> index 6c2a667..e79b2d7 100644
>> --- a/boards.cfg
>> +++ b/boards.cfg
>> @@ -392,6 +392,7 @@ igep0020 arm armv7 igep0020 isee omap3
>> igep0030 arm armv7 igep0030 isee omap3
>> am3517_evm arm armv7 am3517evm logicpd omap3
>> devkit8000 arm armv7 devkit8000 timll omap3
>> +cm_t35 arm armv7 cm_t35 - omap3
>> omap4_panda arm armv7 panda ti omap4
>> omap4_sdp4430 arm armv7 sdp4430 ti omap4
>> s5p_goni arm armv7 goni samsung s5pc1xx
>> diff --git a/doc/README.omap3 b/doc/README.omap3
>> index 6227151..460950d 100644
>> --- a/doc/README.omap3
>> +++ b/doc/README.omap3
>> @@ -21,6 +21,8 @@ Currently the following boards are supported:
>>
>> * TI/Logic PD Zoom 2 [7]
>>
>> +* CompuLab Ltd. CM-T35 [8]
>> +
>> Toolchain
>> =========
>>
>> @@ -61,6 +63,11 @@ make
>> make omap3_zoom2_config
>> make
>>
>> +* CM-T35:
>> +
>> +make cm_t35_config
>> +make
>> +
>> Custom commands
>> ===============
>>
>> @@ -119,7 +126,7 @@ To read a bit :
>> Acknowledgements
>> ================
>>
>> -OMAP3 U-Boot is based on U-Boot tar ball [8] for BeagleBoard and EVM done by
>> +OMAP3 U-Boot is based on U-Boot tar ball [9] for BeagleBoard and EVM done by
>> several TI employees.
>>
>> Links
>> @@ -153,6 +160,11 @@ http://www.logicpd.com/products/devkit/ti/zoom_mobile_development_kit
>> [7] TI/Logic PD Zoom 2
>>
>> http://www.logicpd.com/sites/default/files/1012659A_Zoom_OMAP34x-II_MDP_Brief.pdf
>> -[8] TI OMAP3 U-Boot:
>> +
>> +[8] CompuLab Ltd. CM-T35:
>> +
>> +http://www.compulab.co.il/t3530/html/t3530-cm-datasheet.htm
>> +
>> +[9] TI OMAP3 U-Boot:
>>
>> http://beagleboard.googlecode.com/files/u-boot_beagle_revb.tar.gz
>> diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h
>> new file mode 100644
>> index 0000000..63a4938
>> --- /dev/null
>> +++ b/include/configs/cm_t35.h
>> @@ -0,0 +1,364 @@
>> +/*
>> + * (C) Copyright 2006-2008
>> + * Texas Instruments.
>> + * Richard Woodruff<r-woodruff2@ti.com>
>> + * Syed Mohammed Khasim<x0khasim@ti.com>
>> + *
> 2010 copyright?
Yes, of course.
>> + * Configuration settings for the TI OMAP3530 Beagle board.
>
> ^^^^ need fixes..
Will fix.
>> + *
>> + * See file CREDITS for list of people who contributed to this
>> + * project.
>> + *
>> + * This program is free software; you can redistribute it and/or
>> + * modify it under the terms of the GNU General Public License as
>> + * published by the Free Software Foundation; either version 2 of
>> + * the License, or (at your option) any later version.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> + * You should have received a copy of the GNU General Public License
>> + * along with this program; if not, write to the Free Software
>> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
>> + * MA 02111-1307 USA
>> + */
>> +
>> +#ifndef __CONFIG_H
>> +#define __CONFIG_H
>> +
>> +/*
>> + * High Level Configuration Options
> [...]
--
Sincerely yours,
Mike.
^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~2010-11-28 7:56 UTC | newest]
Thread overview: 13+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-11-11 8:03 [U-Boot] [PATCH] omap3: add CM-T35 board Mike Rapoport
2009-11-11 13:01 ` Paulraj, Sandeep
2009-11-11 13:41 ` Mike Rapoport
2009-11-11 13:58 ` Peter Tyser
2009-11-11 14:07 ` Mike Rapoport
2009-11-11 14:18 ` Peter Tyser
2009-11-11 14:24 ` Tom
2009-11-11 14:56 ` Mike Rapoport
2009-11-11 21:35 ` Wolfgang Denk
-- strict thread matches above, loose matches on Subject: below --
2010-11-23 7:29 [U-Boot] [PATCH] OMAP3: " Mike Rapoport
2010-11-24 2:58 ` Nishanth Menon
2010-11-25 16:29 ` Paulraj, Sandeep
2010-11-28 7:56 ` Mike Rapoport
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox