[U-Boot] [PATCH v4] OMAP3: add CM-T35 board

[Tom <Tom.Rix@windriver.com>]

Mike Rapoport wrote:
> Tom,
> 
> Tom wrote:
>> Paulraj, Sandeep wrote:
>>>> Add CM-T35 board support
>>>>
>> Please add more description of the board.
>>
>>>> Signed-off-by: Mike Rapoport <mike@compulab.co.il>
>>>>
>>>> -- 
>>>> v2 changes:
>>>> - rename board config file from omap3_cm-t35.h to cm-t35.h
>>>> - remove SZ_xx references
>>>> - add MAKEALL/MAINTEINERS entries
>>
>> Wolfgang had made this comment on V2 that has not been addressed.
>>
>>>  > diff --git a/include/configs/cm-t35.h b/include/configs/cm-t35.h
>>>> new file mode 100755
>>>>> index 0000000..b881112
>>>>> --- /dev/null
>>>>> +++ b/include/configs/cm-t35.h
>>> ...
>>>>> +#ifndef __ASSEMBLY__
>>>>> +extern struct gpmc *gpmc_cfg;
>>>>> +extern unsigned int boot_flash_base;
>>>>> +extern volatile unsigned int boot_flash_env_addr;
>>>>> +extern unsigned int boot_flash_off;
>>>>> +extern unsigned int boot_flash_sec;
>>>>> +extern unsigned int boot_flash_type;
>>>>> +#endif
>>> These should not be needed in your board config file. Please move to a
>>> more appropriate header.
> 
> As I've already answered Wolfgang ([1]), this is what _all_ other omap3 board
> do... Moving these requires rework of common omap3 code and updates to all omap3
> boards.
> 
> 

Yes this change would apply to all the omap3 boards.
But it looks like they are are all the same change.

The change per board, would be to delete these externs once the
first code change is made.

Since this is a code movement change, it can be verified by running
MAKEALL arm before and after the change.

Tom