[U-Boot] Unable to launch menuconfig

[U-Boot] Unable to launch menuconfig

[Ioannis Kyriakopoulos]

Hi all,

 

I have downloaded the u-boot source and I am able to build it for my target
(beagleboard). However, I am not able to launch menuconfig.  I know that
menuconfig works because I am able to launch it when I am building my Linux
kernel. 

 

$ make ARCH=arm CROSS_COMPILE=arm-none-linux-gnueabi- omap3_beagle_config

Configuring for omap3_beagle board...

$ make ARCH=arm CROSS_COMPILE=arm-none-linux-gnueabi- menuconfig

Generating include/autoconf.mk

Generating include/autoconf.mk.dep

make: *** No rule to make target `menuconfig'.  Stop.

 

Any ideas?

 

Thanks in advance.

 

-limp

[U-Boot] Unable to launch menuconfig

[Ben Warren]

On Wed, Nov 25, 2009 at 7:11 AM, Ioannis Kyriakopoulos <
johnkyr83@hotmail.com> wrote:

> Hi all,
>
>
>
> I have downloaded the u-boot source and I am able to build it for my target
> (beagleboard). However, I am not able to launch menuconfig.  I know that
> menuconfig works because I am able to launch it when I am building my Linux
> kernel.
>
>
> You're mistaken.  There's a slow-moving movement towards using Kconfig (and
thus menuconfig) in main line U-boot, but it's not there yet.

>
> $ make ARCH=arm CROSS_COMPILE=arm-none-linux-gnueabi- omap3_beagle_config
>
> Configuring for omap3_beagle board...
>
> $ make ARCH=arm CROSS_COMPILE=arm-none-linux-gnueabi- menuconfig
>
> Generating include/autoconf.mk
>
> Generating include/autoconf.mk.dep
>
> make: *** No rule to make target `menuconfig'.  Stop.
>
>
>
> Any ideas?
>
>
>
> Thanks in advance.
>
>
>
> -limp
>
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>
>

[U-Boot] Unable to launch menuconfig

[Ioannis Kyriakopoulos]

Thanks for the reply.

 

If menuconfig and Kconfig are not supported yet, is there a way to configure
my U-boot version?

 

From: Ben Warren [mailto:biggerbadderben at gmail.com] 
Sent: 25 November 2009 15:33
To: Ioannis Kyriakopoulos
Cc: u-boot at lists.denx.de
Subject: Re: [U-Boot] Unable to launch menuconfig

 

 

On Wed, Nov 25, 2009 at 7:11 AM, Ioannis Kyriakopoulos
<johnkyr83@hotmail.com> wrote:

Hi all,



I have downloaded the u-boot source and I am able to build it for my target
(beagleboard). However, I am not able to launch menuconfig.  I know that
menuconfig works because I am able to launch it when I am building my Linux
kernel.



You're mistaken.  There's a slow-moving movement towards using Kconfig (and
thus menuconfig) in main line U-boot, but it's not there yet. 


$ make ARCH=arm CROSS_COMPILE=arm-none-linux-gnueabi- omap3_beagle_config

Configuring for omap3_beagle board...

$ make ARCH=arm CROSS_COMPILE=arm-none-linux-gnueabi- menuconfig

Generating include/autoconf.mk

Generating include/autoconf.mk.dep

make: *** No rule to make target `menuconfig'.  Stop.



Any ideas?



Thanks in advance.



-limp


_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

 

[U-Boot] Unable to launch menuconfig

[Ben Warren]

Ioannis Kyriakopoulos wrote:
> Thanks for the reply.
>
>  
>
> If menuconfig and Kconfig are not supported yet, is there a way to configure
> my U-boot version?
>
>  
>   
Of course.  Please RTFM.

regards,
Ben