[U-Boot] [PATCH 4/5] AM3517EVM: Add mux configuration

[Tom <Tom.Rix@windriver.com>]

Hiremath, Vaibhav wrote:
>> -----Original Message-----
>> From: Wolfgang Denk [mailto:wd at denx.de]
>> Sent: Tuesday, November 24, 2009 1:19 AM
>> To: Hiremath, Vaibhav
>> Cc: u-boot at lists.denx.de
>> Subject: Re: [U-Boot] [PATCH 4/5] AM3517EVM: Add mux configuration
>>
>> Dear hvaibhav at ti.com,
>>
>> In message <1258974539-28130-1-git-send-email-hvaibhav@ti.com> you
>> wrote:
>>> From: Vaibhav Hiremath <hvaibhav@ti.com>
>>>
>>> Updated mux.h file for AM3517 specific mux configuration.
>>>
>>> Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
>>> ---
>>>  include/asm-arm/arch-omap3/mux.h |   35
>> +++++++++++++++++++++++++++++++++++
>>>  1 files changed, 35 insertions(+), 0 deletions(-)
>>>
>>> diff --git a/include/asm-arm/arch-omap3/mux.h b/include/asm-
>> arm/arch-omap3/mux.h
>>> index 0c01c73..9f06fbb 100644
>>> --- a/include/asm-arm/arch-omap3/mux.h
>>> +++ b/include/asm-arm/arch-omap3/mux.h
>>> @@ -403,6 +403,41 @@
>>>  #define CONTROL_PADCONF_D2D_SBUSFLAG	0x0260
>>>  #define CONTROL_PADCONF_SDRC_CKE0	0x0262
>>>  #define CONTROL_PADCONF_SDRC_CKE1	0x0264
>>> +/* AM3517 specific */
>>> +#define CONTROL_PADCONF_CCDC_PCLK       0x01E4
>>> +#define CONTROL_PADCONF_CCDC_FIELD      0x01E6
>>> +#define CONTROL_PADCONF_CCDC_HD         0x01E8
>>> +#define CONTROL_PADCONF_CCDC_VD         0x01EA
>>> +#define CONTROL_PADCONF_CCDC_WEN        0x01EC
>> ...
>>
>> Where are these defines used? I think I don't see them in any of the
>> patches of this patch series?
>>
> [Hiremath, Vaibhav] These are being used in board/ty/am3517/am3517evm.c file under the function set_muxconf_regs().
> 

It seems like these defines are only going to be used by the am3517.
If this is so, please move them to a board specific file.

Tom

> Thanks,
> Vaibhav
> 
>> Best regards,
>>
>> Wolfgang Denk