From: Heiko Schocher <hs@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH][RFC][for next] 5xxx, fdt: move fdt_fixup_memory() to cpu.c file
Date: Thu, 03 Dec 2009 11:20:06 +0100 [thread overview]
Message-ID: <4B1790D6.6030303@denx.de> (raw)
u-boot updates, before starting Linux, the memory node in the
DTS. As this is a "standard" feature, move this functionality
to the cpu.c file for mpc5xxx and mpc512x processors.
Signed-off-by: Heiko Schocher <hs@denx.de>
---
based against git://git.denx.de/u-boot.git next
board/cm5200/cm5200.c | 7 -------
board/davedenx/aria/aria.c | 1 -
board/esd/mecp5123/mecp5123.c | 1 -
board/freescale/mpc5121ads/mpc5121ads.c | 1 -
board/matrix_vision/mvbc_p/mvbc_p.c | 1 -
board/mucmc52/mucmc52.c | 1 -
board/tqc/tqm5200/tqm5200.c | 1 -
board/uc101/uc101.c | 1 -
cpu/mpc512x/cpu.c | 1 +
cpu/mpc5xxx/cpu.c | 1 +
10 files changed, 2 insertions(+), 14 deletions(-)
diff --git a/board/cm5200/cm5200.c b/board/cm5200/cm5200.c
index 9e2f1a5..33bf9c4 100644
--- a/board/cm5200/cm5200.c
+++ b/board/cm5200/cm5200.c
@@ -271,13 +271,6 @@ static void ft_blob_update(void *blob, bd_t *bd)
if (ret < 0)
printf("ft_blob_update(): cannot set /model property err:%s\n",
fdt_strerror(ret));
-
- ret = fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
-
- if (ret < 0) {
- printf("ft_blob_update(): cannot set /memory/reg "
- "property err:%s\n", fdt_strerror(ret));
- }
}
#endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */
diff --git a/board/davedenx/aria/aria.c b/board/davedenx/aria/aria.c
index cc69c9d..f17df60 100644
--- a/board/davedenx/aria/aria.c
+++ b/board/davedenx/aria/aria.c
@@ -196,6 +196,5 @@ int checkboard (void)
void ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
- fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
}
#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
diff --git a/board/esd/mecp5123/mecp5123.c b/board/esd/mecp5123/mecp5123.c
index 5139358..748ad7c 100644
--- a/board/esd/mecp5123/mecp5123.c
+++ b/board/esd/mecp5123/mecp5123.c
@@ -273,6 +273,5 @@ int checkboard(void)
void ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
- fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
}
#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
diff --git a/board/freescale/mpc5121ads/mpc5121ads.c b/board/freescale/mpc5121ads/mpc5121ads.c
index 2fa3650..2e13ea8 100644
--- a/board/freescale/mpc5121ads/mpc5121ads.c
+++ b/board/freescale/mpc5121ads/mpc5121ads.c
@@ -350,6 +350,5 @@ int checkboard (void)
void ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
- fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
}
#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
diff --git a/board/matrix_vision/mvbc_p/mvbc_p.c b/board/matrix_vision/mvbc_p/mvbc_p.c
index 0cbe900..4392176 100644
--- a/board/matrix_vision/mvbc_p/mvbc_p.c
+++ b/board/matrix_vision/mvbc_p/mvbc_p.c
@@ -262,7 +262,6 @@ void show_boot_progress(int val)
void ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
- fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
}
int board_eth_init(bd_t *bis)
diff --git a/board/mucmc52/mucmc52.c b/board/mucmc52/mucmc52.c
index b4ed735..66973f0 100644
--- a/board/mucmc52/mucmc52.c
+++ b/board/mucmc52/mucmc52.c
@@ -404,6 +404,5 @@ void pci_init_board (void)
void ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
- fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
}
#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
diff --git a/board/tqc/tqm5200/tqm5200.c b/board/tqc/tqm5200/tqm5200.c
index 5a091c4..d90bae8 100644
--- a/board/tqc/tqm5200/tqm5200.c
+++ b/board/tqc/tqm5200/tqm5200.c
@@ -745,7 +745,6 @@ int board_get_height (void)
void ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
- fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
}
#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
diff --git a/board/uc101/uc101.c b/board/uc101/uc101.c
index 1485c02..c7dfb7b 100644
--- a/board/uc101/uc101.c
+++ b/board/uc101/uc101.c
@@ -377,6 +377,5 @@ void hw_watchdog_reset(void)
void ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
- fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
}
#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
diff --git a/cpu/mpc512x/cpu.c b/cpu/mpc512x/cpu.c
index 42ccd81..dac48db 100644
--- a/cpu/mpc512x/cpu.c
+++ b/cpu/mpc512x/cpu.c
@@ -197,6 +197,7 @@ void ft_cpu_setup(void *blob, bd_t *bd)
#ifdef CONFIG_HAS_ETH0
fdt_fixup_ethernet(blob);
#endif
+ fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
}
#endif
diff --git a/cpu/mpc5xxx/cpu.c b/cpu/mpc5xxx/cpu.c
index efa64c7..2a28df4 100644
--- a/cpu/mpc5xxx/cpu.c
+++ b/cpu/mpc5xxx/cpu.c
@@ -157,6 +157,7 @@ void ft_cpu_setup(void *blob, bd_t *bd)
}
#endif
+ fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
}
#endif
--
1.6.2.5
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
next reply other threads:[~2009-12-03 10:20 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-12-03 10:20 Heiko Schocher [this message]
2009-12-07 21:50 ` [U-Boot] [PATCH][RFC][for next] 5xxx, fdt: move fdt_fixup_memory() to cpu.c file Wolfgang Denk
2009-12-08 7:01 ` Heiko Schocher
2009-12-08 21:07 ` Wolfgang Denk
2009-12-08 21:13 ` Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4B1790D6.6030303@denx.de \
--to=hs@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox