From mboxrd@z Thu Jan  1 00:00:00 1970
From: Felix Radensky <felix@embedded-sol.com>
Date: Thu, 10 Dec 2009 01:15:01 +0200
Subject: [U-Boot] Problem with transparent PCI-PCI bridge on Canyonlands
In-Reply-To: <20091209230142.26AA73F6CC@gemini.denx.de>
References: <4B1FE62C.7080407@embedded-sol.com>
	<20091209204912.24E183F6CC@gemini.denx.de>
	<4B202073.6090200@embedded-sol.com>
	<4B2022D6.7040104@embedded-sol.com>
	<20091209230142.26AA73F6CC@gemini.denx.de>
Message-ID: <4B202F75.1090407@embedded-sol.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Wolfgang Denk wrote:
> Dear Felix Radensky,
>
> In message <4B2022D6.7040104@embedded-sol.com> you wrote:
>   
>> Anyway, in this configuration u-boot also hangs when PLX board is 
>> plugged in.
>>     
>
> Are you using an ATX power supply? If not: do that!
>   

I do use ATX power supply, but it only has 20 pins, while Canyonlands
connector has 24 pins. Could that be a problem ?

Felix.