From: Tom <Tom.Rix@windriver.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v4 09/12] SPEAr : Support added for SPEAr300 board
Date: Wed, 13 Jan 2010 07:31:44 -0600 [thread overview]
Message-ID: <4B4DCB40.7010400@windriver.com> (raw)
SPEAr300 SoC support contains basic spear300 support along with the
usage of following drivers
- serial driver(UART)
- i2c driver
- smi driver
- nand driver(FSMC)
- usbd driver
Signed-off-by: Vipin <vipin.kumar@st.com>
---
MAKEALL | 1 +
Makefile | 1 +
board/spear/spear300/Makefile | 51 ++++++++++++++++++++++++++++++++++
board/spear/spear300/config.mk | 39 ++++++++++++++++++++++++++
board/spear/spear300/spear300.c | 57 +++++++++++++++++++++++++++++++++++++++
include/configs/spear.h | 25 +++++++++++++++--
6 files changed, 171 insertions(+), 3 deletions(-)
create mode 100755 board/spear/spear300/Makefile
create mode 100755 board/spear/spear300/config.mk
create mode 100755 board/spear/spear300/spear300.c
<snip>
diff --git a/include/configs/spear.h b/include/configs/spear.h
index a625c31..15a8241 100755
--- a/include/configs/spear.h
+++ b/include/configs/spear.h
@@ -28,7 +28,12 @@
* High Level Configuration Options
* (easy to change)
*/
+#if defined(CONFIG_MK_spear600)
#define CONFIG_SPEAR600 1
+#elif defined(CONFIG_MK_spear300)
+#define CONFIG_SPEAR3XX 1
+#define CONFIG_SPEAR300 1
+#endif
There should be a config file per board.
The common parts can be kept in a separate file
So the should be 'spear300.h' etc.
Tom
next reply other threads:[~2010-01-13 13:31 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-01-13 13:31 Tom [this message]
2010-01-14 11:11 ` [U-Boot] [PATCH v4 09/12] SPEAr : Support added for SPEAr300 board Vipin KUMAR
2010-01-14 15:49 ` Tom
-- strict thread matches above, loose matches on Subject: below --
2010-01-11 11:15 [U-Boot] [PATCH v4 00/12] Support for SPEAr SoCs Vipin KUMAR
2010-01-11 11:15 ` [U-Boot] [PATCH v4 01/12] SPEAr : Adding README.spear in doc Vipin KUMAR
2010-01-11 11:15 ` [U-Boot] [PATCH v4 02/12] SPEAr : Adding basic SPEAr architecture support Vipin KUMAR
2010-01-11 11:15 ` [U-Boot] [PATCH v4 03/12] SPEAr : i2c driver support added for SPEAr SoCs Vipin KUMAR
2010-01-11 11:15 ` [U-Boot] [PATCH v4 04/12] SPEAr : smi driver support " Vipin KUMAR
2010-01-11 11:15 ` [U-Boot] [PATCH v4 05/12] SPEAr : nand " Vipin KUMAR
2010-01-11 11:15 ` [U-Boot] [PATCH v4 06/12] SPEAr : usbd " Vipin KUMAR
2010-01-11 11:15 ` [U-Boot] [PATCH v4 07/12] SPEAr : Support added for SPEAr600 board Vipin KUMAR
2010-01-11 11:15 ` [U-Boot] [PATCH v4 08/12] SPEAr : Support for HW mac id read/write from i2c mem Vipin KUMAR
2010-01-11 11:15 ` [U-Boot] [PATCH v4 09/12] SPEAr : Support added for SPEAr300 board Vipin KUMAR
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4B4DCB40.7010400@windriver.com \
--to=tom.rix@windriver.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox