From: Scott Wood <scottwood@freescale.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 3/9] Add v1.1 support to nand_spl fsl nfc driver
Date: Fri, 15 Jan 2010 17:48:45 -0600 [thread overview]
Message-ID: <4B50FEDD.7000003@freescale.com> (raw)
In-Reply-To: <4b73d43f1001151530r2329b2e4pa3ae82071a3dd33f@mail.gmail.com>
John Rigby wrote:
> No I have not tested on mx27. I don't have any hw. If someone could
> test it that would be great. Also I really don't know if the syndrome
> stuff is needed.
I was just about to comment on that. :-)
At a first glance it looks like you'll need either some custom read/write page,
or complicated read_buf/write_buf -- but I'm not sure that all of the stuff
being done in the syndrome functions is needed (or even that the syndrome
functions are a good starting point), and this driver already has complicated
read/write_buf that could probably be tweaked to work with this chip.
> This is a straight port from KARO's linux driver
> (not mainline) that I know works on mx25. If someone can verify that
> it works on mx27 and/or mx31 I would like to get it accepted as is
> (with fixes above). After it is in I will go back and try to clean it
> up some more.
OK.
-Scott
next prev parent reply other threads:[~2010-01-15 23:48 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-01-13 4:43 [U-Boot] [PATCH 0/9] Add support for i.MX25 SOC and TX25 board John Rigby
2010-01-13 4:43 ` [U-Boot] [PATCH 1/9] mxc_serial replace platform specific clock John Rigby
2010-01-13 4:43 ` [U-Boot] [PATCH 2/9] arm926ejs: add nand_spl boot support John Rigby
2010-01-13 4:43 ` [U-Boot] [PATCH 3/9] Add v1.1 support to nand_spl fsl nfc driver John Rigby
2010-01-13 4:43 ` [U-Boot] [PATCH 4/9] Nand mxc_nand add v1.1 controller support John Rigby
2010-01-13 4:43 ` [U-Boot] [PATCH 5/9] fec_mxc: cleanup and factor out imx27 dependencies John Rigby
2010-01-13 4:43 ` [U-Boot] [PATCH 6/9] Add support for Freescale MX25 SOC John Rigby
2010-01-13 4:43 ` [U-Boot] [PATCH 7/9] fec_mxc: add imx25 support John Rigby
2010-01-13 4:44 ` [U-Boot] [PATCH 8/9] env_nand.c: print error message and fail gracefully John Rigby
2010-01-13 4:44 ` [U-Boot] [PATCH 9/9] Add support for KARO TX25 board John Rigby
2010-01-13 15:26 ` Fabio Estevam
2010-01-15 15:20 ` Wolfgang Denk
2010-01-15 22:28 ` [U-Boot] [PATCH 8/9] env_nand.c: print error message and fail gracefully Scott Wood
2010-01-13 15:10 ` [U-Boot] [PATCH 4/9] Nand mxc_nand add v1.1 controller support Fabio Estevam
2010-01-13 16:50 ` John Rigby
2010-01-15 0:48 ` Fabio Estevam
2010-01-15 16:49 ` John Rigby
2010-01-15 22:36 ` Scott Wood
2010-01-15 23:32 ` John Rigby
2010-01-13 15:15 ` [U-Boot] [PATCH 3/9] Add v1.1 support to nand_spl fsl nfc driver Fabio Estevam
2010-01-15 23:13 ` Scott Wood
2010-01-15 23:30 ` John Rigby
2010-01-15 23:48 ` Scott Wood [this message]
2010-01-15 15:09 ` [U-Boot] [PATCH 0/9] Add support for i.MX25 SOC and TX25 board Wolfgang Denk
2010-01-15 15:14 ` Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4B50FEDD.7000003@freescale.com \
--to=scottwood@freescale.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox